Ricoh Ri 1000 Manual de usuario
RICOH Ri 1000
Procedure for long-term storage
1/ 22
Version 1.0.0
RICOH
Ri 1000
Procedure for
long-term
storage
RICOH Ri 1000
Procedure for long-term storage
2/ 22
Where to Inquire
For inquiries, contact your sales or service representative.
RICOH Ri 1000
Procedure for long-term storage
3/ 22
Contents
1. Introduction. ........................................................................................................................................ 4
2. Procedure for long-term storage .................................................................................................. 5
3. Attaching the head protection cover ........................................................................................... 6
Guide to the head protection cover ......................................................................................................... 6
Removing the head protection cover ..................................................................................................... 11
Installation/removal of head protection cover with cleaning solution .................................................. 13
How to check the condition of the installation of the head protection cover with cleaning solution...16
4. Preparing Your Printer for Storage/Shipping .......................................................................... 17
5. Prevention of habituation of bellows ......................................................................................... 19
RICOH Ri 1000
Procedure for long-term storage
4/ 22
1. Introduction.
This procedure is the best procedure that improved the contents described in User
manual.Please do this procedure.
If you haven’t the head protection cover, contact your sales or service representative.
RICOH Ri 1000
Procedure for long-term storage
5/ 22
2. Procedure for long-term storage
This is necessary to keep the printer in optimal condition and avoid potential damage
that can be easily prevented. If the printer is left powered off for 12 hours or more,
attach a head protection cover to the carriage to protect the print head. For more
information, see "Attaching the head protection cover".
For long-term storage (powered off for 2 weeks or longer) or shipping, replace the ink
with cleaning solution and attach a head protection cover to the carriage. For more
information, see "Preparing Your Printer for Storage/Shipping".
Status
Remarks
The case of over 12
hours
and under 2 weeks.
Attach a head protection cover to the carriage.
We recommend making it as short as possible
to leave powered
off.
The case of over 2
weeks
Cleaner in all channels after cleaner charging state.
Attach a head protection cover to the carriage.
RICOH Ri 1000
Procedure for long-term storage
6/ 22
3. Attaching the head protection cover
Installing the head protection cover will protect the print head from damage even
when the automatic maintenance function is not working because the power is off.
IMPORTANT! Turn off the printer before attaching the head protection cover.
Guide to the head protection cover
1. Left side (single frame on the top front)
2. Caps
3. Right side (two frames on the top)
1.Put a tray or paper under the head.
The tray or paper prevents solid ink, lint, and cleaning liquid from entering the
RICOH Ri 1000
Procedure for long-term storage
7/ 22
machine.
2. Move the head protection cover under the carriage.
We recommend that the head protection cover be moved under the carriage by
standing on the right side of the printer, in front of the maintenance unit, and passing
it through the guide rods from above.
To do so, hold the right side of the head protection cover (the side with the two claws
at the top) as shown below to make it easier to attach the cover to the carriage. Note
the orientation of the head protection cover.
If the carriage is in a position where it is difficult to pass through the head protection
cover when working, move the carriage slowly by hand to ensure a gap for the head
protection cover to pass through.
RICOH Ri 1000
Procedure for long-term storage
8/ 22
After passing through the guide rod, move the head protection cover to the bottom of
the carriage, keeping it parallel to the guide rod and carriage so that the cap is
horizontal. At this time, please keep the cap surface of the head protection cover
facing toward the upper carriage.
3. Align the left and right corners of the head protection cover with the
carriage corners.
The places to align are the right and left sides of the carriage, respectively, as shown
below.
In doing so, be careful of the orientation of the head protection cover.
[Right side]
RICOH Ri 1000
Procedure for long-term storage
9/ 22
[Left side]
When installing the head protection cover standing on the right side of the printer, in
front of the maintenance unit, the two claws can be seen from the person installing
the cover as shown below.
Align the two corners of the head protection cover, represented by the red and blue
circles, with the corners of the carriage.
The left side of the two claws of the head protection cover should be aligned so that
they are in contact against the corners of the carriage. The right-hand claw, on the
other hand, should be lifted up and aligned against the corner of the carriage so that it
RICOH Ri 1000
Procedure for long-term storage
10 / 22
rests against the corner of the carriage.
The pawl on the side of the carriage that is not visible because it is in the shadow of
the carriage should be handled with the head protection cover parallel to the guide rod
and carriage, so that when the two pawls on the right side of the head protection
cover are aligned with the mounting position, they are simultaneously aligned with the
mounting position. the two pawls on the right side of the head protection cover can be
aligned to the mounting position at the same time
4.Take the filled cleaning liquid with the head protection cover under the
carriage to prevent spillage
If cleaning solution spills when the head protection cover is pushed up, wipe it off.
After attaching the head protection cover, observe it from the front and check if the
head protection cover is not tilted.
If it is tilted, a gap may be visible between the carriage and the cap inside the head
protection cover, as shown in the NG image below. In this case, perform the
Otros manuales para Ri 1000
7
Otros manuales de Almacenamiento de Ricoh
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario