Ricoh D124 Manual
1
MO-C1 Training
Slide 1
D124
Service Training
MO-C1
Version 1.1
This training course provides service technician training for the Mo-C1. This is a
new engine, so the training course is a full course.
Version 1.1 modifications
Initializing the New Paper Roll (starting at slide 207)
Removing a Roll (starting at slide 215)
Controlling the Ink Supply to the Sub Tanks: Monitoring the Sub Tank During
Printing (slide 259)
Controlling the Ink Supply to the Sub Tanks: What Happens if Air is Detected?
(slide 260)
2
MO-C1 Training
Slide 2
D124
Service Training
Course Overview
This section provides an overview of the sections of the training course.
3
MO-C1 Training
Slide 3
Contents of the Course
Product Overview
Main Specifications
Installation
Maintenance
Machine Overview
Scanner
Image Processing
Paper Feed
Ink Supply and Printing
Maintenance Unit
Troubleshooting for the Printer Engine
The Operation Details section contains detailed descriptions of certain
procedures, such as power on initialization, paper roll initialization, and so on.
4
MO-C1 Training
Slide 4
D124
Service Training
Product Overview
This section provides an overview of the machine, and the options that can be
installed.
5
MO-C1 Training
Slide 5
What Models are there in the Series?
MO-C1 (D124)
Output speed (A1 LEF, high speed mode, copying):
» 3.4 ppm (
black-and-white), 1.1 ppm (color)
» 5 sheets A1 LEF in 109 s (
black-and-white)
, 293 s (color)
– 5 sheets D LEF in 116 s (
black-and-white)
, 318 s
(color)
» First copy: Less than 31 s
Warm-up time: Less than 40 s (23 degrees C)
Paper thickness: 51 to 220 g/m
2
Durability: 72 km
Paper Size:
» Width: 210 to 914.4 mm (8.3 to 36 in)
» Length 210 to 15,000 mm (8.3 to 591 in.)
Contains scanner and printer kits as standard equipment
Contains one roll unit, bypass feed, an original stacker and
a printout exit stacker as standard equipment.
Supports SDK solutions such as Global Scan NX.
The warm-up time includes time for the controller to start up.
Output speed: For printing, there are three types: standard, quality, and high
speed, selectable with the printer driver. For copying, there is high speed and
standard only.
6
MO-C1 Training
Slide 6
Enhanced controller
USB/SD Media to Print (STD)
Scan to USB/SD (STD)
High Productivity
The black heads have a staggered layout that makes b/w printing
faster.
New operation panel
Full Color Wide VGA touch screen
Environmentally Friendly
Power Consumption 90% of N-C3
Short warm up time (less than 40 seconds)
Complies with RoHS Directive
Paper Handing
Built-in exit stacker (10 sheets A0 SEF/A1 LEF, A1 SEF/A2 LEF,
plain/inkjet/glossy paper)
1 roll + manual feed (1 additional roll option)
Product Concepts
Additional Features
Full front operation
Increased languages from N-C3 (Brazilian Portuguese and Greek support)
HDD overwrite/encryption functions are standard
7
MO-C1 Training
Slide 7
Position in the Product Range
This is an office color machine, not a professional color machine.
8
MO-C1 Training
Slide 8
Appearance (1)
This shows the machine, with two roll feeders, exit stacker, and printer/scanner unit.
Roll feeder 1 (standard) is not pre-installed in the factory. It must be installed at the
same time as machine installation.
Rear Original
Stacker
Original Stacker
Original Table
Main Unit
(Printer)
Optional
Roll Unit
Front Cover
Exit Stacker
Scanner Unit
Ink Supply Unit
Original Guide
Standard
Roll Unit
In this photo, the standard roll unit is obscured by the ink supply unit.
Roll unit: Also known as a roll feeder unit.
9
MO-C1 Training
Slide 9
Appearance (2)
The exit stacker can be folded.
The operation panel and scanner unit can be separated
from the main unit and put on a table or a separate stand.
This is a lot easier to do than in the Be-C1/C1.5 series.
Exit Stacker
The operation panel and scanner unit cannot be turned around so that the exit is
the other side of the machine from the operator.
10
MO-C1 Training
Slide 10
Appearance (3)
Bypass
Feed
Ink Cartridges
Ink
Collector
Tank
Ink Collector Tank
Capacity: 425 cc
Replace every 8,000 m (APV: 360m, Color ratio: 10％, Coverage: B/W 6%,
CMYK 5% each)
Replaced by users
Ink cartridges
Cartridge Capacity: Black 180ml, CMY 80m
Target Yield (A1 LEF, APV = 360m, 1P/J, Coverage B/W= 6% Color=
5%x4C=20%, Usage ratio Black 90% Color 10%):
¾Black: 774 Copies, 460 m
¾Cyan: 342 Copies, 203 m
¾Magenta: 347 Copies, 206 m
¾Yellow: 355 Copies, 211 m
Warranty period
¾Unopened: 24 months
¾Opened: 6 months
Environment
¾Storage: Temperature -30 to 43 degrees Celsius, Humidity 15 to 80%
¾Use: Temperature 10 to 32 degrees Celsius, Humidity 15 to 80%
¾Transport: Temperature -30 to 50 degrees Celsius, Humidity 15 to 90%
Otros manuales para D124
1
Otros manuales de Impresora de Ricoh
Ricoh
Ricoh M126 Manual de usuario
Ricoh
Ricoh AP410 Instrucciones de instalación y mantenimiento
Ricoh
Ricoh SP 210 Manual de usuario
Ricoh
Ricoh BP20 - Aficio B/W Laser Printer Manual de usuario
Ricoh
Ricoh Aficio GX7000 Manual
Ricoh
Ricoh Aficio MP 1600 Manual del propietario
Ricoh
Ricoh Aficio AP900 Guía de inicio rápido
Ricoh
Ricoh Aficio CL5000 Manual de funcionamiento
Ricoh
Ricoh fax3900l Manual de usuario
Ricoh
Ricoh SP C250DN Manual de usuario
Ricoh
Ricoh Aficio MP 201SPF Manual de usuario
Ricoh
Ricoh INFOPRINT 1811 Manual de usuario
Ricoh
Ricoh Lef-C1 Guía de instalación
Ricoh
Ricoh Pro 8300 Series Guía de instalación
Ricoh
Ricoh InfoPrint 1985 Manual de usuario
Ricoh
Ricoh Aficio SP4100 Series Manual de usuario
Ricoh
Ricoh Aficio CL2000 Manual de usuario
Ricoh
Ricoh PRO C751 Instrucciones de funcionamiento
Ricoh
Ricoh Aficio GX7000 Manual de usuario
Ricoh
Ricoh Aficio GX7000 Manual de usuario
