Ricoh M 320 Manual de usuario
1
1. Setting Up the Machine
120 - 127 V, 60 Hz, 7.7 A or more
220 - 240 V, 50/60 Hz, 4.3 A or more
Power Source
10
50 15
80
32
89.6
DYG212
20 cm
(7.9 inches)
70 cm
(27.6 inches)
10 cm
(4.0 inches)
10 cm
(4.0 inches)
32 cm
(12.6 inches)
DYG126
Do not install or use this device in any area that does not have adequate ventilation as shown.
Check the supplied items. For information on the supplied items, see the User's Guide on the website.
DYG127
DYG128
DYG129
DYG160
DYG130
DYG131
DYG132
M0ESIC0004
1
2
DYG134
2
DYG135
DYG136
DYG137
DYG138
DYG139
DYG140
DYG141
DYG142
DYG143
DYG144
DYG145
DYG146
DYG147
3
DYG148
DYG149
1
2
When using a wireless (Wi-Fi) connection, connect the wireless LAN option and proceed to Step 26 (for M 320FB/320F) or Step
38 (for M 320).
M0ESIC0005
When using a wired (Ethernet) connection, connect the Ethernet cable and proceed to Step 26 (for M 320FB/320F) or Step 38
(for M 320).
DYH608
When using a USB connection, do not connect the cable and proceed to Step 26 (for M 320FB/320F) or Step 38 (for M 320).
5
M 320
M0ESIC0012
Language 121
German
English
French
M0ESIC0022
Password
12
Apply the following func.
Setup initial password.
Admin. Tools Lock.
M0ESIC0006
Password 22
Administrator Password
FTP Password
M0ESIC0007
Password
(8 chars)
Please Setup Password
M0ENIC0004
Password
(8 chars)
Please Confirm Password
M0ENIC0006
Set Date 23
Day/Month/Year
Month/Day/Year
Year/Month/Day
DSG330
12 12
Set Date
Day/Month/Year
//2017
DYG183
Set Time
22
24-hour Format
12-hour Format
DSG332
17 45
DSG333
Set Time
Hour: Min
:
Configure the network setting.
Go to page 6 "2. Configuring the Network Setting".
6
2. Configuring the Network Setting
Check How the Computer Is Connected
Specify how to connect to your computer according to the communication environment of your system.
The wireless LAN (Wi-Fi) connection is available when you attach a wireless LAN option to the USB port on the back of the machine.
M0ENIC0007
Connect by Wi-Fi Setup WizardConnect by the PIN code
Can you identify the PIN code
of the router (access point)
to which you want to connect?
Connect by the WPS button
Connect via Wi-Fi Direct
See Wi-Fi Direct Guide in our website
.
Does the access point have
a WPS button?
Use a router (access point)?Connect using an
Ethernet cable
Connect using a
USB cable
Which method do you want to use (wireless or wired)?
Wired
Wireless
No
Yes
Go to page 15 "Connecting the Machine via USB or
Ethernet".
Go to page 10 "Easy Setup Using the WPS Button".
Go to page 8 "Easy Setup Using the Wi-Fi Setup Wizard".
Go to page 12 "Easy Setup Using a PIN Code".
• To set up manually, see User’s Guide in our website.
• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct
communication among Wi-Fi Direct-compliant devices becomes possible.
When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.
■Attaching the wireless LAN option
Turn off the machine, and then insert the wireless LAN option into the USB port on the back of the machine.
M0ESIC0005
If a screen asking you to select Wi-Fi or Ethernet is displayed, select [Wi-Fi].
7
Use the machine from a smart device Android iOS
■How to use the machine from a
smart device
From smart device applications, you can use the
following functions of the machine:
• Sending scanned images or documents from
the machine to the smart device
• Printing photographs and documents stored on
a smart device
After scanning the following QR code with
your smart device, search for the application
corresponding to the machine and download it
from the site that appears.
DYG151
■How to use the NFC (Android
smart devices only)
1. Configure the network connection of
the machine. For details, see page 8
"Connecting the Machine via Wireless
(Wi-Fi)".
2. After scanning the following QR code
with your smart device, search for the
application corresponding to the machine
and download it from the site that appears.
3. Start the application corresponding to
the machine, and write the machine's
network information on the NFC using
the application.
4. Perform printing by touching the NFC
from "RICOH Smart Device Connector".
Android iOS
8
Connecting the Machine via Wireless (Wi-Fi)
DYG155
Easy Setup Using the Wi-Fi Setup Wizard
From the control panel of this machine, you can also configure the
Wireless (Wi-Fi) settings for the machine.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
●Router (access point)
Checking the SSID and Encryption key
The SSID and Encryption key for the router (access point) may be
printed on a label affixed to the router (access point). For details
about the SSID and Encryption key, refer to the router (access point)
manual.
SSID
Encryption key
:XXXXXXXXXXXXX
:XXXXXXXXXXXXX
DSG099
Confirm the SSID and Encryption key, and write them down on the
blank space as shown below.
SSID:
Encryption key:
Configuring Settings Using the Control Panel
●Make sure the Ethernet cable is not connected to the
machine.
M 320FB/320F
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine and the wireless (Wi-Fi) connection is enabled.
For details, see page 6 "Attaching the wireless LAN option".
3. Press [Quick Setup].
For details about [Detailed Setup], see User's Guide.
ECC292
4. Press [Change Wi-Fi Connection Mode].
ECC293
5. Press [Setup Wizard].
6. Press the SSID of the router (access point) from the
searched SSID list.
7. Enter the encryption key using the number keys, and then
press [Connect].
• As the passphrase, you can enter either 8 to 63 ASCII characters
(0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
• For details about checking the encryption key, see “Checking the
SSID and Encryption key”.
8. Check the result.
Connection has succeeded:
“Connected to access point.” is displayed.
Connection has failed:
“Failed to connect to access point.” is displayed.
Check the configuration for the router (access point), and then try the
connection again.
9. Press [OK].
10. Configuring the Wireless (Wi-Fi) settings is complete.
To use the fax function, configure the settings on page
16 "3. FAX Settings (M 320FB/320F only)".
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Impresora todo en uno de Ricoh
Ricoh
Ricoh SP C360 series Hoja de instrucciones
Ricoh
Ricoh 5100WD Instrucciones de uso
Ricoh
Ricoh MP C401 Manual de usuario
Ricoh
Ricoh MP C2011 Manual de usuario
Ricoh
Ricoh Pro C5100 Series Manual de usuario
Ricoh
Ricoh Aficio MP1800 Manual de usuario
Ricoh
Ricoh M052 Manual de usuario
Ricoh
Ricoh Savin en5100WD Manual de usuario
Ricoh
Ricoh MP C3004 series Guía de inicio rápido
Ricoh
Ricoh B230 Manual de usuario
Ricoh
Ricoh A283 Manual de usuario
Ricoh
Ricoh MET-C1 Guía de inicio rápido
Ricoh
Ricoh C280 Manual de usuario
Ricoh
Ricoh Aficio MP 1600L2 Guía de inicio rápido
Ricoh
Ricoh SP 220SNW Manual de usuario
Ricoh
Ricoh Priport JP5000 Manual de usuario
Ricoh
Ricoh Aficio MP 8001 Manual de usuario
Ricoh
Ricoh Aficio MP C305 Instrucciones de instalación
Ricoh
Ricoh SP C260SFNw Manual de usuario
Ricoh
Ricoh 7025 Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
