Ricoh Aficio MP 5000b Manual de usuario
Ricoh Product Line Segment 2 thru 6
www.ricoh-usa.com
MP/5000/5001, MP C5000/C6000/C6501, MP7000/8000, MP6001/7001, MP8001/9001, MP907EX
Hard function
keys have
Red/Yellow
status LEDs
To access system administrator tools and
counter information
Ready Not Ready
Simplified display magnifies fonts
for easy viewing. See page 2 for
example
Understanding Your Ricoh Control Panel
The program button allows you to store
frequently used job settings and screen
display defaults
Clears screen to default
settings
Allows user to
interrupt job in
progress for new job
8.5” Full Color W-VGA Screen
Color Copier Display Panel
Simplified Display
Key color is only
available in simplified
display mode.
Paper tray status.
Frequently used
reduce/enlarge ratios. These
can be adjusted to suit users
needs.
Finishing options. Sort, Stack,
Staple and punch.
Short cut
keys. Register
keys in user
tools “General
Settings”
Batch & Mixed
Originals.
Extended feature options including; margins, stamps,
page numbering, covers & slip sheets.
Specify color mode
and quality. Confirm current settings.
Black & White Display
Finishing options may be added to this screen.
Copying Documents
Place Originals in the document
Feeder
Adjust paper guides
Remove paperclips, staples or other loose objects before placing originals in feeder. Be sure to
straighten bent or curled edges If using the Glass Platen, Lift the lid and place documents face
down on the glass at the position of arrow regardless of size
Select any additional copy settings
Press original document type, i.e. Text, Text/Photo, Photo, etc.
Press [sort] to collate document (if not highlighted)
Enter any finishing options
Enter desired number of copies
Press [Sample Copy] copier will print one completed set and
prompt you [Suspend] to cancel job or change settings
[Continue] if job is correct to complete remaining copy sets
Or press START to skip [Sample Copy]
Note: When copying from the glass and requesting multiple copies,
press the # key after feeding your last original to release the
additional copies
Copy Enhancements
Select an original type that is suitable for your originals to
enhance
your copies.
There are five original types available:
Text
For originals that contain mainly text or printed characters.
Text / Photo
For originals that contain both text and photographs or
pictures.
Photo
For Photographs or pictures choose from the following types.
•Glossy Photo:
•Use when copying developed photographs
•Printed Photo:
•Use when copying photographs or pictures that are
printed on
•paper e.g. magazines)
•Copied Photo:
•Use when copying copies or originals generated by color
copiers
Pale
For originals that have lighter lines written in pencil, or faintly
copied slips.
Generation Copy
For originals that are copied repeatedly. The copy image can
be reproduced sharply and clearly
Auto Image Density is highlighted
Press the Right or Left arrow to lighten or darken
document
Press [] or [] to adjust the image density
Select your Original document type
You may also select the [Auto Density] option
to further lighten or darken your document
settings.
Sort/Stack & Rotate Sort Output
SORT Rotate/Sort –the machine assembles copies as sets in sequential order. Use [Sort] when
placing multiple page document to maintain page order - Same as [Collate]. When a finisher is installed
with the device the machine will output the document in the Sort/Shift Sort order, separating the first set
from the next set.
STACK –groups together copies of each page in a multi-page
original. Use Stack when setting multiple pages in the document
feeder and requiring the same copy number count per page to be
stacked.
ROTATE SORT–Use Rotate Sort when your machine does not have
a finisher to keep jobs separated . To use this option you must have
one paper tray loaded with 8.5x11 paper in landscape orientation and
the other tray loaded with 11x8.5 portrait and select this option from
the finishing mode or from the short cut menu on copier screen.
Stapling Documents
1. Place Documents in the document Feeder
2. On bottom of touch screen - select the staple
position that match your job output.
–Select Top Left (straight)
–Top Left Slant
–Bottom Left (for landscape documents fed through
feeder in portrait orientation)
–Double Staple Left (portrait Orientation)
–Double Staple Top (landscape orientation)
–Booklet stapling (for booklet folded at center
stapling)
3. Press [OK]
4. Press [Start] 2. Select desired staple position
3. Press [OK]
4. Place documents in feeder
5. Press [START]
Note: The number of pages stapled and stapling positions will vary by
machine model type and type of finisher installed.
Single Slant Top Double LTR BOOKLET CENTER
SADDLESTICH Double Ledger
2 & 3 Hole Punch
Duplex Copying (2 Sided Output)
Place Originals in Feeder
Landscape orientation or
Portrait orientation
Press OK
Enter desired options
Select copy count
Press START
Select
or
You can select these
options from the main
copier panel
Select
Copying Mixed Originals
1. Place Originals in the Document Feeder
Place the smaller sizes at the top of the stack as shown in the image
Adjust the Side Guide flush against the largest original.
Ensure that the right edges of all the sheets are aligned against the
right side guide .
Ensure that all originals are lying face up.
2. Check the condition of the paper stack:
All sheets should lie flat, with no curled or bent edges,
Paper should be clean and feel dry to the touch,
Attachments such as staples, tags or tapes must be removed.
3. Press [Special Original]
4. Press [Mixed Sizes] then touch [OK]
5. Select any additional options
3. If there are multiple paper sizes you must either have all the
sizes in different paper trays, or select the size paper you want
them all to be or they will output al the default auto paper select.
6. Enter desired number of copies
7. Press [Start]
8. Press [Clear Modes] key when you have
finished.
Selecting Duplexing must all be output on the same size.
This will return the document feeder to normal copy mode ready for the
next user.
Acceptable sizes in Inch:11" x 17“ ; 8½" x14" ; 8½" x 11" ;5½" x 8½"
Otros manuales para Aficio MP 5000b
1
Este manual sirve para los siguientes modelos
16
Tabla de contenidos
Otros manuales de Impresora todo en uno de Ricoh
Ricoh
Ricoh M018 Manual de usuario
Ricoh
Ricoh Aficio MP C3300SPF Manual de usuario
Ricoh
Ricoh Aficio MP C7501SP Manual de usuario
Ricoh
Ricoh Aficio MP 161F Manual de usuario
Ricoh
Ricoh Aficio MP 1100 Manual de usuario
Ricoh
Ricoh Aficio MP 5500 Manual de usuario
Ricoh
Ricoh MP C401 Manual de usuario
Ricoh
Ricoh Aficio SP 100SU e Instrucciones de instalación
Ricoh
Ricoh Aficio MP C5502 Manual de usuario
Ricoh
Ricoh C9100 Manual de usuario
Ricoh
Ricoh Aficio 3224C Manual de usuario
Ricoh
Ricoh Aficio MP 3351 Manual de usuario
Ricoh
Ricoh Aficio MP 161F Manual de usuario
Ricoh
Ricoh 3045 - Aficio B/W Laser Manual de usuario
Ricoh
Ricoh Aficio MP 2851 Manual de usuario
Ricoh
Ricoh Aficio 3232C Manual de usuario
Ricoh
Ricoh Aficio 3260C Manual de usuario
Ricoh
Ricoh Pro C7100s Hoja de instrucciones
Ricoh
Ricoh Aficio 106/LD215c Manual de instrucciones y seguridad
Ricoh
Ricoh Aficio MP 1600L Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
