Ricoh 4700WD Instrucciones de uso

Paper type: Joushitsu 55kg , paper thickness=80 µm // Pages in book=36 // Print scale=81%

Gap (when printed at 81% scale) = Pages in book ×Paper thickness = 0 mm

4700W OperatingInstructionsSystem Settings

Operating Instructions

System Settings

Read this manual carefully before you use this product and keep it handy for future

reference.

For safety, please follow the instructions in this manual.

Printed in The Netherlands

EE GB B010-8700

Paper type: Joushitsu 55kg , paper thickness=80 µm // Pages in book=36 // Print scale=81%

Gap (when printed at 81% scale) = Pages in book ×Paper thickness = 0 mm

Declaration of Conformity

“The Product complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage

Directive 73/23/EEC.”

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

cmeans STAND BY.

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Ricoh recommends that you use genuine Ricoh toner.

Ricoh shall not be responsible for any damage or expense that might result from the use of parts other

than genuine Ricoh parts in your Ricoh office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Rex-Rotary recommends that you use genuine Rex-Rotary toner.

Rex-Rotary shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Rex-Rotary parts in your Rex-Rotary office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Gestetner recommends that you use genuine Gestetner toner.

Gestetner shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Gestetner parts in your Gestetner office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Nashuatec recommends that you use genuine Nashuatec toner.

Nashuatec shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Nashuatec parts in your Nashuatec office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Declaration of Conformity

“The Product complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage

Directive 73/23/EEC.”

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

cmeans STAND BY.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

ENERGY STAR Program

❖

❖❖

❖Low Power mode

This product automatically lowers its power consumption 15 minutes after

the last copying or printing job has been completed. Printing is available in

this mode, but if you use the copier, press the {Clear Modes/Energy Saver}key.

• For details about how to change the default interval before entering Low

Power mode, see p.25 “Energy Saver Timer”

❖

❖❖

❖Auto Off mode (Copier only)

To conserve energy, this product automatically turns off 60 minutes after the

last copying or printing job has been completed. Printing is available in this

mode, but if you use the copier, press the operation switch.

• For details about how to change the default interval before entering Auto

Off mode, see p.26 “Auto Off Timer”

❖

❖❖

❖Sleep mode (Printer installed)

If the printer feature is installed, this product automatically lowers its power

consumption even further 60 minutes after the last copy or print job has fin-

ished. Printing is still possible in Sleep mode, but if you wish to make copies

press the operation switch first.

• For details about how to change the default interval that the machine waits

before entering Sleep mode, see p.26 “Auto Off Timer”

As an ENERGY STAR Partner, we have determined

that this machine model meets the ENERGY STAR

Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for

developing and introducing energy-efficient office equipment to deal with environmental is-

sues, such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall

place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equip-

ment by means of energy-saving features, such as Low-power mode.

DolphinGB-Syst-F_V4_FM.book Page i Wednesday, May 2, 2001 1:19 PM

Specification

Recycled paper

In accordance with the ENERGY STAR Program, we recommended use of recy-

cled paper which is environment friendly. Please contact your sales representa-

tive for recommended paper.

Low Power mode Power consumption 200Wh or less

Default interval 15 minutes

Recovery time –

Auto Off mode Power consumption 65Wh or less

Default interval 60 minutes

Sleep mode Power consumption 65Wh or less

Default interval 60 minutes

DolphinGB-Syst-F_V4_FM.book Page ii Wednesday, May 2, 2001 1:19 PM

iii

How to Read this Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation that might result in

death or serious injury when you misuse the machine without following the in-

structions under this symbol. Be sure to read the instructions, all of which are de-

scribed in the Safety Information section.

CAUTION:

This symbol indicates a potentially hazardous situation that might result in mi-

nor or moderate injury or property damage that does not involve personal injury

when you misuse the machine without following the instructions under this

symbol. Be sure to read the instructions, all of which are described in the Safety

Information section.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be

damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-

erating.

Note

This symbol indicates precautions for operation, or actions to take after misop-

eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,

or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[]

Keys that appear on the machine's panel display.

{}

Keys built into the machine's operation panel.

DolphinGB-Syst-F_V4_FM.book Page iii Wednesday, May 2, 2001 1:19 PM

Terms in this Manual

Guide to Option Components

In this manual, the following abbreviations are used.

•Roll Holder Unit Type A →Roll holder

•2nd Roll Tray Type A →Lower tray

•Stamp Board Type A →Stamp board

•Original Tray Type G →Original Tray

•Hard Disk Drive Option Type 470 →HDD

•Printer Controller RW-470 →Controller

DolphinGB-Syst-F_V4_FM.book Page iv Wednesday, May 2, 2001 1:19 PM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Ricoh

Ricoh

Ricoh Aficio MP 3500SP Manual de usuario

Ricoh

Ricoh Aficio MP C2050 Manual de usuario

Ricoh

Ricoh SP 200S Manual de usuario

Ricoh

Ricoh C3828 Manual de usuario

Ricoh

Ricoh A095 Manual de usuario

Ricoh

Ricoh IS 2245 Manual de servicio

Ricoh

Ricoh Pro C651EX Manual de usuario

Ricoh

Ricoh PRO C9100 Hoja de instrucciones

Ricoh

Ricoh Provence-P2W Manual de usuario

Ricoh

Ricoh LI-MF1 M126 Guía de inicio rápido

Ricoh

Ricoh SP 200S Manual de usuario

Ricoh

Ricoh FAX 3320L Manual del propietario

Ricoh

Ricoh Pro 8300S Instrucciones de funcionamiento

Ricoh

Ricoh A109 Manual de usuario

Ricoh

Ricoh IM 2500 Series Instrucciones originales

Ricoh

Ricoh 3045 - Aficio B/W Laser Manual de usuario

Ricoh

Ricoh C220S - Aficio SP Color Laser Manual de instrucciones

Ricoh

Ricoh SP 311DN Manual de usuario

Ricoh

Ricoh Aficio 240W Manual de usuario

Ricoh

Ricoh Mv106 Manual de usuario

Ricoh

Ricoh C221SF - Aficio SP Color Laser Instrucciones de instalación

Ricoh

Ricoh B064 SERIES Manual de usuario

Ricoh

Ricoh Aficio MP 3500SP Instrucciones de uso

Ricoh

Ricoh Aficio SP C210SF Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario