RFIDeas AIR ID Manual de usuario
FCC ID: M9MBUPCPROXH100
AIR ID
AIR IDAIR ID
AIR ID®
AIR ID
AIR IDAIR ID
AIR ID®LT
LTLT
LT
and
pcProxTM
Proximity Activated Identification
User Manual
www.RFIDeas.com
PN: MAN-USER2.5
i END-USER LICENSE AGREEMENT
END-USER LICENSE AGREEMENT
End-User License Agreement for RF IDeasTM SOFTWARE and HARDWARE - RF
IDeas’ AIR ID®, AIR ID®LT, and pcProx Proximity Activated Systems.
IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is
a legal agreement between you (either an individual or a single entity) and the
manufacturer RF IDeas ("Manufacturer") with which you acquired the RF IDeas
software and hardware product(s) identified above ("PRODUCT"). The PRODUCT
includes the pcProx Base Unit, AIR ID Badge, AIR ID Base Unit or AIR ID LT
Badge, AIR ID LT Base, computer software, the associated media, any printed
materials, and any "online" or electronic documentation. By installing, copying or
otherwise using the PRODUCT, you agree to be bound by the terms of this EULA.
The SOFTWARE PORTION OF THE PRODUCT includes the computer software,
the associated media, any printed materials, and any "online" or electronic
documentation. By installing, copying or otherwise using the PRODUCT, you
agree to be bound by the terms of this EULA. If you do not agree to the terms of
this EULA, RF IDeas is unwilling to license the PRODUCT to you. In such event,
you may not use or copy the SOFTWARE PORTION OF THE PRODUCT, and you
should promptly contact the vendor you obtained this PRODUCT from for
instructions on return of the unused product(s) for a refund.
The products described in this publication are intended for consumer applications.
AIR ID and AIR ID LT operate on shared radio channels. Radio interference can
occur in any place at any time, and thus the communications link may not be
absolutely reliable. AIR ID and AIR IDLT must be used so that a loss of
communications due to radio interference or otherwise will not endanger either
people or property, and will not cause the loss of valuable data. RF IDeas assumes
no liability for the performance of product. RF IDeas products are not suitable for
use in life-support applications, biological hazard applications, nuclear
control applications, or radioactive areas. None of these products or
components, software or hardware, are intended for applications that provide
life support or any critical function necessary for the support of protection of
life, property or business interests. The user assumes responsibility for the use
of any of these products in any such application. RF IDeas, Inc. shall not be liable
for losses due to failure of any of these products, or components of these products,
beyond the RF IDeas commercial warranty, limited to the original purchase price.
SOFTWARE PRODUCT LICENSE
The PRODUCT is protected by copyright laws and international copyright treaties,
as well as other intellectual property laws and treaties. The SOFTWARE
PORTION OF THE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE. This EULA grants you the following rights:
* Software. You may install and use one copy of the SOFTWARE PORTION OF
THE PRODUCT on the COMPUTER.
* Network Services. If the SOFTWARE PORTION OF THE PRODUCT includes
functionality that enables the COMPUTER to act as a network server, any number
of computers or workstations may access or otherwise utilize the basic network
services of that server. The basic network services are more fully described in the
printed materials accompanying the SOFTWARE PORTION OF THE PRODUCT.
* Storage/Network Use. You may also store or install a copy of the computer
SOFTWARE PORTION OF THE PRODUCT on the COMPUTER to allow your
other computers to use the SOFTWARE PORTION OF THE PRODUCT over an
internal network, and distribute the SOFTWARE PORTION OF THE PRODUCT to
your other computers over an internal network. However, you must acquire and
SOFTWARE PRODUCT LICENSE ii
dedicate a license for the SOFTWARE PORTION OF THE PRODUCT for each
computer on which the SOFTWARE PORTION OF THE PRODUCT is used or to
which it is distributed. A license for the SOFTWARE PORTION OF THE
PRODUCT may not be shared or used concurrently on different computers.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
* Limitations on Reverse Engineering, Decompilation and Disassembly. You may
not reverse engineer, decompile, or disassemble the PRODUCT, except and only
to the extent that such activity is expressly permitted by applicable law
notwithstanding this limitation.
* Separation of Components. The PRODUCT is licensed as a single product. Its
component parts may not be separated for use on more than one computer.
* Single COMPUTER. The PRODUCT is licensed with the COMPUTER as a
single integrated product. The PRODUCT may only be used with the COMPUTER.
* Rental. You may not rent or lease the PRODUCT without permission from RF
IDeas.
* Software Transfer. You may permanently transfer all of your rights under this
EULA only as part of a sale or transfer of the COMPUTER, provided you retain no
copies, you transfer all of the PRODUCT (including all component parts, the media
and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s)
of Authenticity), AND the recipient agrees to the terms of this EULA. If the
PRODUCT is an upgrade, any transfer must include all prior versions of the
PRODUCT.
* Termination. Without prejudice to any other rights, RF IDeas may terminate this
EULA if you fail to comply with the terms and conditions of this EULA. In such
event, you must destroy all copies of the SOFTWARE PORTION OF THE
PRODUCT and all of its component parts.
3. UPGRADES. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade
from another product, whether from RF IDeas or another supplier, you may use or
transfer the PRODUCT only in conjunction with that upgraded product, unless you
destroy the upgraded product. If the SOFTWARE PORTION OF THE PRODUCT
is an upgrade of a RF IDeas product, you now may use that upgraded product
only in accordance with this EULA. If the SOFTWARE PORTION OF THE
PRODUCT is an upgrade of a component of a package of software programs
which you licensed as a single product, the SOFTWARE PORTION OF THE
PRODUCT may be used and transferred only as part of that single product
package and may not be separated for use on more than one computer.
4. OEM COPYRIGHT. All title and copyrights in and to the PRODUCT (including
but not limited to any images, photographs, animations, video, audio, music, text
and "applets," incorporated into the PRODUCT), the accompanying printed
materials, and any copies of the SOFTWARE PORTION OF THE PRODUCT, are
owned by RF IDeas or its suppliers. The PRODUCT and SOFTWARE PORTION
OF THE PRODUCT is protected by copyright laws and international treaty
provisions. You may not copy the printed materials accompanying the PRODUCT.
5. DUAL-MEDIA SOFTWARE. You may receive the SOFTWARE PORTION OF
THE PRODUCT in more than one medium. Regardless of the type or size of
medium you receive, you may use only one medium that is appropriate for your
single computer. You may not use or install the other medium on another
computer. You may not loan, rent, lease, or otherwise transfer the other medium to
another user, except as part of the permanent transfer (as provided above) of the
SOFTWARE PORTION OF THE PRODUCT.
6. OEM PRODUCT SUPPORT. Product support for the PRODUCT is NOT
provided by RF IDeas Inc. or its subsidiaries. For product support, please refer to
iii Limited Warranty
the OEM suppliers support number provided in the documentation. Should you
have any questions concerning this EULA, or if you desire to contact OEM for any
other reason, please refer to the address provided in the documentation provided.
FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING
TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR
WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH
THE SOFTWARE PRODUCT PRINTED MATERIALS.
Limited Warranty
RF IDeas, Inc. warrants to the original buyer of this product, that the hardware and
related disk(s) are free of defects in material and workmanship for a period of one
year from date of purchase from RF IDeas or from an authorized RF IDeas dealer.
Should the RF IDeas products fail to be in good working order at any time during
the one-year period, RF IDeas will, at its option, repair or replace the product at no
additional charge, provided that the product has not been abused, misused,
repaired or modified. This warranty shall be limited to repair or replacement and in
no event shall RF IDeas be liable for any loss of profit or any commercial or other
damages, including but not limited to special, incidental, consequential or other
similar claims.
No dealer, distributor, company, or person has been authorized to change or add
to the terms of this agreement, and RF IDeas will not be bound by any
representation to the contrary. RF IDeas SPECIFICALLY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF
PURPOSE. Since some states do not allow such exclusion of limitation of
incidental or consequential damages for consumer products, check the statute of
the state in which your business resides. This warranty gives you the specific legal
rights in addition to any rights that you have under the laws of the state in which
your business resides or operates.
Returns
RF IDeas products which require Limited Warranty service during the warranty
period shall be delivered to the nearest authorized dealer or sent directly to RF
IDeas at the address below with proof of purchase and a Return Materials
Authorization (RMA) Number provided by RF IDeas technical support Dept.
Replacement parts or complete boards become the property of RF IDeas.
If the returned board or unit is sent by mail, the purchaser agrees to pre-pay the
shipping charges and insure the board or unit or assume the risk of loss or damage
which may occur in transit. The purchaser is expected to employ a container
equivalent to the original packaging.
Copyright
Copyright by RF IDeas, Inc. 1997-1999. All rights reserved. Reproduction or
distribution of this document in whole or in part or in any form is prohibited without
express written permission from RF IDeas, Inc.
Trademarks
All RF IDeas products are trademarks of RF IDeas, Inc. All other product names or
names are trademarks or registered trademarks of their respective holders.
Limited Warranty iv
Disclaimer
This User’s Guide is printed in the U.S.A. Any resemblance mentioned in the
User’s guide to persons living or dead, or to actual corporations or products is
purely coincidental. RF IDeas believes that the information contained in this
manual is correct. However, RF IDeas does not assume any responsibility for the
accuracy of the content of this User Manual, nor for any patent infringements or
other rights of third parties. RF IDeas reserves the right to make any modifications
in either product or the manual without giving prior written notification.
v ID Badge Unit FCC compliance statement
Congratulations on the purchase of your AIR ID system. We at
RF IDeas hope you enjoy using your new AIR ID Proximity
Activated Identification System as much as we enjoyed creating
and developing it! Please share your comments and suggestions
for our future "AIR ID AWARE" solutions!
If you are interested in our OEM or Independent Developer’s
Programs, please call!
Thank you,
The Staff at RF IDeas
Need Assistance?
Call Toll-free: (888) 542-4743
Fax: (413) 581-3004
E-mail: TechSup[email protected]om
Mail to:
RF IDeas
290 Lexington Dr.
Buffalo Grove, IL 60089-6930
ID Badge Unit FCC compliance statement
FCC ID M9MMU100
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference that may cause undesired operation.
ID Base Unit FCC compliance statement
FCC ID M9MBU100, M9MBUPCPROXH100, or
M9MBUPCPROXM100
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interface, and (2) This device must accept any
interference that may cause undesired operation.
AIR ID
TABLE OF CONTENTS
END-USER LICENSE AGREEMENT________________i
SOFTWARE PRODUCT LICENSE __________________i
Limited Warranty ________________________________iii
ID Badge Unit FCC compliance statement____________ v
ID Base Unit FCC compliance statement _____________ v
TABLE OF CONTENTS __________________________ 1
Proximity Activated Products_______________________ 4
AIR ID (Active Badge) __________________________________5
AIR ID LT (Active Badge)________________________________5
pcProx TM (Passive Badge)________________________________5
What’s New In Version 2 __________________________ 6
Understanding Wireless Identification _______________ 7
What is AIR ID®Proximity Activated Identification? _7
Why is it necessary? _____________________________ 7
Who can benefit with the AIR ID System? __________ 8
What is included with the AIR ID Kit? ______________ 8
What is pcProx TM Proximity Activated Identification? 9
What is included with the pcProx Kit? _____________ 9
How does AIR ID Operate?_______________________ 10
What are the minimum system requirements?________________10
Hardware Installation ___________________________ 11
Windows 95/98 Users __________________________________11
Windows NT Users ____________________________________11
AIR ID Badge & Battery ________________________________12
Battery Life (Active badge users only) _____________________12
pcProx Badge (Passive badge users only)___________________12
Software Installation ____________________________ 13
Software Setup _________________________________ 14
Enable the AIR ID Screensaver in Windows________ 14
Setting AIR ID System Parameters ________________ 17
AIR ID Startup Screen (First Time Users) __________ 17
AIR ID Application (Standard Launch) _____________ 19
Base Unit Dialog Tab____________________________ 20
Base Unit Com Port______________________________ 20
Get Base Version________________________________ 20
Base Proximity Range ___________________________ 21
Radio Frequncy Issues__________________________________ 21
Using a Practical Proximity Zone _________________________ 21
Positioning the Base Unit _______________________________ 22
Screensaver Wait Time (seconds)_________________ 22
Screen Saver Wait Time when no Base Unit Attached
________________________________________________ 23
Badge Sensing __________________________________ 23
Multiple Users on This PC________________________ 25
Under 10 Users (auto-scan)______________________________ 25
More Than 10 (auto-scan)_______________________________ 25
More Than 10 (keyboard) _______________________________ 26
Badges Dialog Tab______________________________ 27
Overview _______________________________________ 27
Types of Users __________________________________ 27
Administrative Users___________________________________ 27
Non-Badge Users _____________________________________ 28
AIR ID Badge Users ___________________________________ 28
Set (Changing) Password ________________________ 28
Get Password ___________________________________ 29
Reading a Badge - Orienting the Base Unit _________________ 29
Orienting the Base Unit_________________________________ 30
Administrative Functions _______________________________ 31
Add User________________________________________ 32
Edit User________________________________________ 33
Delete User _____________________________________ 34
Otros manuales para AIR ID
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Otro de RFIDeas
