PN00178 REV02 M220/D220 Mobile Reader User Manual 3
Trademarks
RF CodeTM and the RF Code logo are trademarks of RF Code, Inc. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by RF Code is under license. Black-
Berry™ is a trademark of Research in Motion Limited. All other product or service names are the property of their
respective owners.
Information in this document is provided solely to enable system and software implementors to use RF Code
products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
RF Code reserves the right to make changes without further notice to any products herein. RF Code makes no war-
ranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does RF
Code assume any liability arising out of the application or use of any product, and specically disclaims any and all
liability, including without limitation consequential or incidental damages.
The user of this system is cautioned that any changes or modications to this system, not expressly approved by RF
Code, Inc., could void the warranty.
Bluetooth QD ID: B012541
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including inter-
ference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
CE Compliance
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures. This equipment complies with the requirements relating to electro-
magnetic compatibility, EN 55022 class A, the essential protection requirement of Council Directive 89/336/EEC
on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Copyright Statement
Copyright © 2008 RF Code, Inc. All Rights Reserved.
This document, as well as the hardware and rmware described therein, is furnished under license and may only be
used or copied in accordance with the terms of such license. The information in these pages are furnished for infor-
mational use only, are subject to change without notice, and should not be construed as a commitment by RF Code,
Inc. RF Code assumes no responsibility or liability for any errors or inaccuracies that may appear in these pages.
Every effort has been made to supply complete and accurate information. However, RF Code assumes no responsi-
bility for its use, or for any infringements of patents or other rights of third parties, which would result.
RF Code, Inc.
9229 Waterford Centre Blvd.
Suite 500
Austin, TX 78758
www.rfcode.com
Preface
