Repotec RP-VP0643 Manual de usuario
Network Camera User’s Guide
RP-VP0643
Network Camera
User’s Guide
Software Version 2.1.7
1/82
Network Camera User’s Guide
PT IP Cam / IR IP Cam / Video Server Series
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
For customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void
your authority to operate this equipment.
The shielded interface cable recommended in this manual must be used with this equipment in
order to comply with the limits for a digital device pursuant to Part 15 of FCC Rules.
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
2/82
Network Camera User’s Guide
Table of Contents
Overview............................................................................................................................. 6
Package Contents................................................................................................................ 8
Connections......................................................................................................................... 9
Hardware Installation....................................................................................................... 11
Logging in to Homepage................................................................................................... 12
Before Operation....................................................................................................... 12
Access the Network Camera from the Internet Explorer for the first time............... 16
Logging in as an ordinary User................................................................................. 18
Logging in as an Administrator................................................................................. 18
Operating the Network Camera........................................................................................ 19
Control Panel ............................................................................................................ 20
Advanced Function Area........................................................................................... 22
Basic Setting ..................................................................................................... 22
System.......................................................................................... 23
Camera.......................................................................................... 25
Network........................................................................................ 27
User .............................................................................................. 32
IP Filter......................................................................................... 33
FTP Client .................................................................................... 36
SMTP............................................................................................ 38
Schedule ....................................................................................... 40
Motion Detection.......................................................................... 41
4/82
Network Camera User’s Guide
Time Setting ................................................................................. 42
Popup............................................................................................ 44
Firmware upgrade: ....................................................................... 45
Factory Default............................................................................. 48
Reboot .......................................................................................... 49
Trigger............................................................................................................... 50
Capture.............................................................................................................. 51
RightMouseButton of ActiveX Control.............................................................................. 52
View Menu................................................................................................................ 53
“Image Recording…-> Save as JPEG” .................................................................... 59
“Save Current Picture As …” ................................................................................... 65
Appendix A: Troubleshooting & Frequently Asked Questions.......................................... 67
Appendix B: PING IP Address.......................................................................................... 72
Appendix C: Bandwidth Estimation.................................................................................. 73
Appendix D: Specifications............................................................................................... 74
Appendix E: Time Zone Table........................................................................................... 76
Appendix F: DDNS Application........................................................................................ 78
5/82
Network Camera User’s Guide
Overview
This user’s guide explains how to operate the Infra-Red (IR) Network Camera from a
computer. Basically, the user’s guide is written to be read on the computer display.
However, users might consider printing it out to access easily and read it before you
operate the Network Camera.
Introduction
This IR Network Camera is an inexpensive fully scalable surveillance technology.
Because the Network Cameras can be plugged in to your existing computer network
infrastructure, you will potentially save thousands of dollars on unnecessary cabling. By
using IR technology, this Network Camera is not only working on day but also on night.
The IR Network Camera is accessible via the LAN or Internet connection. Connect your
Network Camera directly to a computer network or DSL modem, and with a standard
Web browser you get instant, on demand video streams. Within minutes you can set up
the Network Camera to capture a video sequence to a PC. Live video image can be
uploaded to a website for the world to see or made available only to select users on the
network.
Features:
zHigh quality 1/3” Sony CCD sensor
zComposite video output
zHigh-Light LED offers greater image quality and longer life span
z30M/50M IR distance
zJPEG video compression
zRemote-Control via Internet Explorer
zSupport statistic and dynamic IP address
zDDNS and PPPoE
zMulti-channel control software for surveillance application
zOn-line firmware upgrade
6/82
Network Camera User’s Guide
Application:
zRemote monitoring
zSurveillance
Minimum System Requirement
zMicrosoft Internet Explorer 5.0 or later
zVGA Monitor resolution 1024 x 768
zPentium 4 1.3GHz or above
zMemory Size: 256MB or above
zWindows ME, 2000, XP, or 2003
7/82
Network Camera User’s Guide
Package Contents
User can find the following items in the package:
zIR IP Camera x 1
zRS-485 terminal x 1
zInstallation software and manual CD x 1
zQuick installation guide
If any of the above items are missing, please contact your dealer immediately.
8/82
Network Camera User’s Guide
Connections
Rear Panel Connections:
1. RS-485: To connect to an indoor/outdoor Pan/Tilt scanner unit.
Definition of the RS-485:
Orange: D-
Blue: D+
2. LAN port: To connect to PC or Hub.
The LAN socket is an RJ-45 connector for connections to 10Base-T Ethernet or
100Base-TX Fast Ethernet cabling. This Ethernet port built NWay protocol can detect or
negotiate the transmission speed of the network automatically. Please use Category 5
“straight through” cable to connect the Network Camera to a 100Mbps Fast Ethernet
network switch or hub.
9/82
Network Camera User’s Guide
3. AC power cord & Local Video out (BNC port)
The AC power input and video output cable are located on the Network Camera’s back
panel. The input power is 85~260VAC..
The Network Camera also provides composite video output. User can use BNC video
cable to connect the Network Camera with a TV monitor or VCR.
10/82
Network Camera User’s Guide
Hardware Installation
1. Fix IR camera to desired location with wall mount fixture
2. Plug-in Network Cable into Ethernet port
Connect an Ethernet cable to the LAN socket located on the Network Camera’s back
panel and attach it to the network.
3. Connect RS485 two wires to RS485 D+ and D- ( if you need to control PT
scanner)
4. Plug-in Power cable into power socket
5. Connect Video BNC connector to a local TV (for checking camera viewing
angle)
6. Done
Once you have installed the Network Camera well, the status LED will turn on. It means
the system is booting up successfully. Furthermore, if you have a proper network
connection, and access to the Network Camera, the 10/100M LAN LED will flash
11/82
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Repotec
