Renkforce 2620931 Manual de usuario
Operating Instructions
HDMI Capture with USB Storage
Item No. 2620931
What’s In The Box
Product
Type-C®to USB HDMI to HDMI
Instruction manual
Signals and Buttons Instruction
- Multi-color: Ready to record
- Stable red light: Recording to external storage
- Flash in red: Warning message
- Light o: Power o
Note: When the LED light is ashing in red, it means the setup or congurations are incorrect:
- No HDMI input signal
- No USB Storage inserted on Storage/ Phone port
- Incorrect System Format for USB Storage (Click MODE button to x)
- Incorrect Encoder Format for USB Storage (Click MODE button to x)
- The capacity of USB Storage is full.
- Existing hidden partition in USB Storage
- HDMI: HDMI signal detected or not
- Power: Power ON/ OFF
- Mode: Stable light ON/ OFF for Auto HD Mode
Flash 2 times for MIC mix mode ON
Flash 4 times for MIC mix mode OFF
Click to record HDMI IN source to storage up to 1080p@60Hz.
1
2
4
3
1. LED light
2. Record button
3. Status signals
4. MODE button
Turn on Compatible Mode to ensure the recording format is compatible with both USB
storage and UVC/PC recording.
- Compatible mode: 1080P@60Hz, H.264, MP4 format
- Don’t switch the mode while recording
Ports Introduction
1234567
Power up by a USB-C®adapter with 5V/2A power supply.
Connect HDMI cable to a monitor for pass-thru of HDMI IN port with up to 4K@60Hz resolution.
Note that the signals from Storage/ Phone port does not support pass-thru to HDMI output
source.
2. HDMI OUT
Connect HDMI cable to any device support HDMI output. Contents transfered by an hub/
adapter may not be transmitted.
3. HDMI IN
Connect USB-C to USB-A cable to a computer to stream or record the video/ audio from input
source. Support third-party softwares like OBS, Potplayer, Xsplit, Skype, Zoom on Windows and
OBS, Skype, Zoom, FaceTime, QuickTime Player on MacOS. Note that H.264 format is not
supported for some Instant Message Applications like Facetime etc,.
4. UVC/ PC
- MIC: Connect a 3.5mm audio cable to a microphone to mix the audio to HDMI input.
- Reset: Use a pin to insert the MIC/ Reset jack for 10 seconds to reset to factory default.
6. MIC/ Reset
Connect a 3.5 mm earphone to listen to the mixed audio.
7. EAR
- Storage: Connect an external USB-A disk (exFAT/ FAT32 format supported) to record streaming
video directly by pressing the Record button on the top of the product. Support simultaneous-
ly record to standalone USB storage and to UVC/ PC, however only as H.264 format.
- Phone: Connect a USB data cable to Android/ iOS phone to stream contents to UVC/ PC. For
Android users, please download MiraPlug App before using. For iOS users, click“Trust the
computer” to begin streaming/ recording.
5. Storage/ Phone
1. POWER
Hardware Installation and Connection
4K pass-thru
Stream/ record
software
*Power should be supplied
by 5V/2A while using.
*Power should be supplied
by 5V/2A while using.
Capture to PC
Click to record
Capture to Standalone USB Disk
USB 2.0
USB Disk/
Flash
Storage/ Phone
1080p@60Hz
LED light
- Multi-color: Ready to record
- Stable red light: Recording to external storage
4K@60Hz
4K@60Hz
USB-C®
HDMI
HDMI
HDMI HDMI USB-A
HDMI IN UVC/ PC
HDMI OUT
1080p@60Hz
4K@60Hz
4K@60Hz
HDMI
HDMI
HDMI HDMI
HDMI IN
HDMI OUT
4K pass-thru
™
™
Hardware Installation and Connection
4K@60Hz
4K@60Hz USB-C®
HDMI
HDMI
HDMI HDMI
USB-A
USB 2.0
Stream/ record
software
HDMI IN
UVC/ PC
HDMI OUT
1080p@60Hz
Capture to PC and Standalone USB Disk Simultaneously
Capture in Compatible Mode
*Power should be supplied
by 5V/2A while using.
USB Disk/
Flash
Storage/ Phone
1080p@60Hz
UVC/ PC and Storage are able to record
simultaneously only as H.264 format.
Stream/ record
software
*Power should be supplied
by 5V/2A while using.
4K@60Hz
USB-C®HDMI HDMI USB-A
HDMI IN UVC/ PC
1080p@60Hz
MODE Button
Click to turn on Compatible Mode
1. Compatible with both PC and USB disk recording
2. 1080P@60Hz, H.264, MP4 format
3. Don’t switch the mode while recording
- Stable light ON/ OFF for Compatible Mode
- Flash 2 times for MIC mix mode ON
- Flash 4 times for MIC mix mode OFF
MODE Light
4K pass-thru
™
™
Hardware Installation and Connection
4K@60Hz
4K@60Hz
HDMI
HDMI
HDMI IN
HDMI OUT
HDMI/
mini-HDMI/
micro-HDMI HDMI
4K@60Hz
HDMI
HDMI
HDMI OUT
Capture from Camera/ Gaming Station
Capture from Laptop/ PC
*Power should be supplied
by 5V/2A while using.
Camera
USB-C®USB-A
Stream/ record
software
Laptop/ PC
UVC/ PC
1080p@60Hz
USB-C®USB-A
Stream/ record
software
UVC/ PC
1080p@60Hz
Standard HDMI for camera includes: HDMI, mini-HDMI, micro-HDMI
Please use an adapter to transmit data.
*Power should be supplied
by 5V/2A while using.
4K@60Hz
HDMI HDMI
HDMI IN
USB 2.0
USB Disk/
Flash
Storage/ Phone
1080p@60Hz
+
4K pass-thru
4K pass-thru
™
Hardware Installation and Connection
HDMI OUT
Capture from Phone
Mix Audio from MIC
*Power should be supplied
by 5V/2A while using.
Android
iOS
USB-C®USB-A
Stream/ record
software
Laptop/ PC
Microphone
UVC/ PC
1080p@60Hz
USB-C
Lightning
micro-USB
1080p@60Hz
Storage/ Phone
USB-A
UVC/ PC
EAR
Note:
1. Capture from phone does not support pass-thru via HDMI OUT port.
2. Mobiles can be captured via HDMI IN port for those support HDMI output.
Download MiraPlug App
for capture and settings
Click “Trust the computer”
*Power should be supplied
by 5V/2A while using.
Mixed
audio
Only audio from HDMI
IN port for Pass-thru
HDMI IN
MIC/ Reset
Storage/ Phone
Trust
Settings on Android/ iOS Mobile
5V/2AUSB data cable
MiraPlug App
Download MiraPlug App on your mobile (Android/ iOS supported).
Power up the product by an independent power 5V/1A adapter. Connect the product
to the mobile with a USB data cable.
®®®
Connect the mobile to the Internet and launch the MiraPlug App; the system will correct the
time automatically. And checks the current version status. If the most recent version is
available, please perform an update to bring the product up to date. To make the product
setting change, click the setting icon in the upper right corner to enter the settings page.
Android users, please enter the device settings page.
2. Connect mobile to product
3. Using the MiraPlug App to Upgrade the product
1. Download MiraPlug App on mobile
1. If you encounter a black screen while recording with a PC or laptop equipped with an Nvidia
graphics card or macOS, turn off the settings to input video and sound to the product.
2. Standalone Record Format：Setting the resolution and frame rate for saving to a standalone
USB disk.
3. exFAT Loop Recording Size：Set the size of each file captured to the standalone USB disk
when recording in loop. Please keep in mind that any abnormal interruptions in recording will
result in the file being lost or damaged.
4. Mic Volume Level：Set the volume of the microphone input on the product.
Setting
ON/OFF
Standalone Record Format
Loop Recording Size of exFAT
MIC Volume Level
1
2
3
4
Update
Operating System
PC
Laptop
- Intel® CoreTM i5 CPU i5-8xxx or above / AMD Ryzen 7 or above
- NVIDIA® GeForce® GTX 660 or above / AMD RadeonTM RX 870 or above
- 8GB RAM (dual channel) or above
- Intel® CoreTM i5 CPU i7-7xxx or above / AMD Ryzen 7 or above
- NVIDIA® GeForce® GTX 1050ti or above
- 8GB RAM (dual channel) or above
- Windows10 (64bits)
- Mac OS X 10.14 or later
Input
External Storage
Recording Format
External Storage
File System
Audio Mixing
For Use With
Weight
Dimensions
Power
Output
Video Capture
Resolution
Product information
System/ Hardware Requirement
HDMI In 2.0, USB 2.0 Type A
MPEG 4 (H.264)
exFAT/ FAT32
MiraPlug App (Android/ iOS)
3.5mm (EAR) 4-pole, 3.5mm(MIC) 4-pole
150 x 80 x 30mm
235g
5V/2A
Pass Through 480p@60Hz, 720p@60/50Hz, 1080i@60Hz,
1080p@60/50Hz, 4K@30/60Hz
HDMI Out 2.0, USB 3.0 Type C®
USB 3.0 Type C (UVC) : 640x480p@60/30Hz,
720p@60/30Hz, 1080p@60/30Hz
USB 2.0 Type A (External Storage):
640x480p@60/30Hz; 720p@60/30Hz, 1080p@60/30Hz
Otros manuales para 2620931
1
Tabla de contenidos
Otros manuales de Tarjeta PCI de Renkforce
Renkforce
Renkforce 2625964 Manual de usuario
Renkforce
Renkforce 1616188 Manual de usuario
Renkforce
Renkforce 1607018 Manual de usuario
Renkforce
Renkforce 1216477 Manual de usuario
Renkforce
Renkforce RF-1937430 Manual de usuario
Renkforce
Renkforce 1648554 Manual de usuario
Renkforce
Renkforce 1603383 Manual de usuario
Renkforce
Renkforce 1760693 Manual de usuario
Renkforce
Renkforce 2620931 Actualización de firmware
Renkforce
Renkforce 2195661 Instrucciones originales
Manuales populares de Tarjeta PCI de otras marcas
Belkin
Belkin F5D7000F Manual de usuario
Pericom
Pericom PI7C7100 Manual de usuario
ADLINK Technology
ADLINK Technology cPCI-3548 Manual de usuario
Digium
Digium TE200 Series Manual de usuario
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manual de usuario
Western Digital
Western Digital FireWire PCI Adapter Manual de usuario