Remington HC-70 Manual de usuario

A Superior Cut

Every Time

Use and Care Guide

Models HC-70, HC-8017B

By registering your new Remington®product you will receive these important benefits:

Proof of ownership • Product protection • Product registration • Special offers

¡Registre su nuevo producto hoy mismo!

Si registra su nueva Remington®podrá participar de los siguientes beneficios:

Prueba de propiedad • Protección del producto • Registro de propiedad • Ofertas especiales

Regístrelo en línea en: http://prc.prodregister.com/remington

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance,

basic precautions should always be

observed, including the following.

Read all instructions before using

this appliance.

DANGER

To reduce the risk of electric shock:

■Do not reach for an appliance that

has fallen into water. Unplug it

immediately.

■Do not use while bathing or in

the shower.

■Do not place or drop into water

or other liquid.

■Do not place or store this appliance

where it can fall or be pulled into a

tub or sink.

■Except when charging, always

unplug this appliance from the

electrical outlet immediately

after using.

■Unplug this appliance before

cleaning it.

WARNING

To reduce the risk of burns, fire,

electric shock or injury to persons:

■This appliance is for household use

only.

■An appliance should never be

left unattended when it’s plugged

in, except when charging a

rechargeable appliance.

■Close supervision is necessary

when this appliance is used by,

on, or near children or persons

with special needs.

■Use this appliance only for its

intended use as described in this

manual. Do not use attachments

not recommended by Spectrum

Brands, Inc.

■Keep the cord away from heated

surfaces.

■Never operate this appliance if it

has a damaged cord or plug, if it is

not working properly, if it has been

dropped or damaged, or if it has

been dropped into water. If any

of these things happen, return

the appliance to a Remington

authorized service center for

examination and repair.

■Never drop or insert any object into

any of the appliance’s openings.

■Do not use outdoors or operate

where aerosol (spray) products are

being used, or where oxygen is

being administered.

■Always store this appliance and

cord in a moisture-free area.

Do not store it in temperatures

exceeding 140°F (60°C).

■Do not plug or unplug this

appliance when your hands are

wet.

■Do not use an extension cord

or a voltage converter with this

appliance.

■Always attach the plug to the

appliance, then to the outlet. To

disconnect, turn all controls to

OFF, then remove plug from outlet.

Detach removable power cords

from appliances for storage.

■Do not place this appliance on any

surface while operating.

Contents

English ................................ 2

Spanish ........................... 13

■This power unit is intended to be

correctly oriented in a vertical or

floor mount position.

■This appliance has a polarized plug

(one blade is wider than the other).

As a safety feature, this plug will

fit in a polarized outlet only one

way. If the plug does not fit fully

in the outlet, reverse the plug. If it

still does not fit, contact a qualified

electrician. Do not attempt to

defeat this safety feature.

■Do not use this appliance with a

damaged or broken cutting unit,

as injury may occur. Always make

certain blades are aligned properly.

■This clipper is designed for use

with 120 Volts AC, 60 HZ electrical

outlets. Do not connect the clipper

to a higher voltage than indicated,

as it may result in personal injury

and/or damage to the clipper.

SAvE ThESE INSTRUCTIONS

Part HC-70 HC-8017B

1. Hair Clipper x x

2. Blade Guard x x

1/8" Guide Comb

x x

4. 1/4" Guide Comb

x x

5. 3/8" Guide Comb

x x

6. 1/2" Guide Comb

x x

7. 5/8" Guide Comb

8. 3/4" Guide Comb

9. 7/8" Guide Comb

10. 1" Guide Comb

11. Right Ear Guide x x

12. Left Ear Guide x x

13. Barber's Comb

14. Styling Comb x

15. Scissors x

16. Barber's Cape x

17. Sectioning Clips

x2 x4

18. Neck Brush x

19. Cleaning Brush x x

20. Lubricating Oil x

21. Instruction Book

x x

22. Storage Case x

23. How-To Style Guide

Product Features

Congratulations on your purchase of one of the finest hair clippers available

today. Your Remington®hair clipper is designed to perform dependably and

efficiently for years, helping you maintain a range of hair styles.

(2)

HC-70

HC-8017B

(1)

Product Features

(3) (4) (5) (6)

(7) (8) (9) (10)

(12)(11)

(13)

(14)

(15)

(16)

(17) (18) (19) (20)

(22)

(23)

(21)

R E C I S I O N

2 0 0

RECISION

1 0 0

A Superior

Cut Every

Time

Use and Care Guide

Models HC-810,

HC-815, HC-8017,

HC-912, HC-920,

HC-921, HC-930

HC-25, HC-50

How to Use

Line Cord Safety Tips

NOTE: This appliance has a polarized

plug (one blade is wider than the

other). As a safety feature, this plug

will fit in a polarized outlet only one

way. If the plug does not fit fully in

the outlet, reverse the plug.

If it still does not fit, contact a quali-

fied electrician. Do not attempt to

defeat this safety feature.

1. To insert plug, grasp it firmly and

guide it into outlet.

2. To disconnect the appliance, grasp

the plug and remove it from outlet.

Do not pull or yank on the cord or

appliance. Do not wrap the cord

around the appliance.

Blade Care

The life of your clippers will depend

on frequency of use, care, application

of oil, hair type and condition. The

HC-8017B has blades which do not

require additional oiling.

Oiling the Blades (HC-70)

■We have pre-oiled and aligned the

blades on your Remington® hair

clipper.

■The blades on your hair clipper

should be oiled

before every

haircut. Simply

place a few

drops of oil on

the teeth of

the blades.

■Turn unit "on" to distribute oil

evenly.

■Not applying enough oil to the

blades generally causes cutting

problems. Blades will wear

prematurely and not cut properly if

they are not sufficiently lubricated.

There may also be a pulling

sensation on the hair.

Oil Cautions

■Use only the light-grade oil

supplied or a suitable alternative

like sewing machine oil.

■Do not use hair oil, grease, or any

oil mixed with kerosene or solvent,

as the solvent will evaporate and

leave the thick oil, slowing the

blades.

How to Use

Before Cutting Hair

1. Make sure your hair clipper is oiled

(if required) and runnning smoothly,

with a slight vibration.

2. Place a cape around the neck of

the person whose hair is being

trimmed or cut. (A cape is provided

with model HC-8017B).

3. This person should be seated so

that the top of their head is at your

eye level.

4. Comb the hair as it is normally

styled.

5. Comb out all knots and tangles.

6. Ensure the hair is dry. Hair clippers

perform best with dry hair, making

it easier to see how much hair is

being cut.

7. Hold the hair clipper in the palm of

one hand with your thumb resting

firmly on the top of the hair clipper.

This grip provides comfortable

cutting control. Although the hair

clipper may be used with the left

or right hand, using it right-handed

allows you to access the taper

lever more easily.

To Attach Trimming Guides

1. Select the trimming guide that

matches the length you want

the hair to be after the cut. The

trimming guides are numbered

and marked with 1/8” (3mm),

1/4” (6mm), 3/8” (9mm), 1/2”

(12mm), 5/8”(15mm), 3/4”(18mm),

7/8”(22mm), and 1”(25mm). See

preceding chart to determine

which combs your model contains.

2. While the clipper is off, hold the

trimming guide with the teeth up.

Slide the trimming guide onto the

blades until it locks into place.

3. To cut the hair

at the top

of the head,

hold the hair

between your

fingers and

cut a small

amount at a

time. Cut from

the front to

the back.

Remove the

trimming guide

and replace

with either the

left or right

ear guide.

The shorter

guide teeth are

designed to

be toward the

ear. Move the

clipper from the back of the head

to the front. This creates a tapered

effect around the ears and back of

the neck.

5. The final trim can be made with

the hair clipper or the included

scissors. Make sure to check over

the entire head for any uneven

areas. For styled hair or giving

quick trims, you may prefer using

your hair clipper without the

trimming guide.

Usage Tips

Giving a Comfortable,

Even Cut

Allow the clipper to cut through the

hair without moving it too quickly.

Moving the clipper too quickly may

create a pulling sensation.

Use short strokes when cutting, and

initially use the longest trimming

guide. You can always use a closer

trimming guide later if you want a

closer cut.

How to Give a Haircut

1. Start at the back of the head.

Holding the clipper as shown,

lightly stroke upward making sure

you are taking off the desired

amount of hair. Work your way

up to the crown of the head in

layers. When

completed,

comb the area

to remove any

loose hair and

to determine

whether you

need any

further cutting.

2. Repeat the

same procedure for each side of

the head. Make sure the length of

the hair is trimmed to the same

length on both sides of the head.

Usage Tips

6. The adjustable taper control lever

allows you to gradually change

the closeness of your cut, either

with or without a trimming guide.

When the lever is fully forward the

blades will give you the closest

cut. Moving the lever gradually

backward increases the cut length.

Very short styles

1. Using the 1/2” (12mm) trimming

guide, hold the comb flat against

the head and

move the hair

clipper from

the back of

the neck to

the crown of

the head.

2. Cut in a similar

manner from

the side to the

top of the head. Then cut from the

front to the crown of the head.

3. If a “Flat Top” style is desired,

remove the trimming guide and

use the barber’s comb. Trim a

little at a time until a flat look is

achieved.

Trimming Beards &

Mustaches

1. Comb your beard in the direction

it grows.

2. Determine the

length you

want the beard

to remain,

and fit the

appropriate

trimming guide.

Remember

the 1/8”

(3mm) guide

will give you

the shortest beard while the 1/2”

(12mm) or 1” (25mm) will give you

the longest. If you want a longer

beard you can use the comb as a

trimming guide.

3. Start trimming under your chin and

work toward your ear and beard

line. Cut in different directions for a

uniform trim.

4. Lightly stroke the edge of your

mustache in a downward

movement.

Maintenance

■Do not wrap the cord around the

appliance.

■This appliance does not contain

any user-serviceable parts. Bring

this appliance to an authorized

service representative for service.

Usage Tips

Performance Guarantee

Spectrum Brands, Inc.

Money-Back Offer

If within 30 days after you have

purchased your Remington®product,

you are not satisfied with it and

would like a refund, just return it,

together with the sales receipt, to the

retailer from whom it was purchased.

Spectrum Brands, Inc. will reimburse

all retailers who accept such appli-

ances within 30 days from date of

purchase. If you have any questions

regarding this money-back guaran-

tee, please call 800-736-4648 in the

U.S. or 800-268-0425 in Canada.

Limited Five-Year Warranty

Spectrum Brands, Inc. warrants

that this product (excluding blade,

comb attachments, and line cord)

is free from defect in material and

workmanship for five years after its

original purchase date. If the product

should become defective within the

warranty period, Spectrum Brands,

Inc. will repair it or elect to replace

it free of charge. We will return your

product, shipping charges prepaid, if

you do the following within five years

of the purchase date:

1. Return the complete product in

person or by mail, postage paid,

to Spectrum Brands, Inc.,

ATTN: Customer Service, 601

Rayovac Drive, Madison, WI

53711. For more information, call

800-736-4648.

2. Include the original purchase

receipt with the product.

3. Include a description of the

problem or defect.

4. Do not return the product to the

store that sold it to you.

Otros manuales para HC-70

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Cortapelos de Remington

Remington

Remington X3 POWER-X Series Manual de usuario

Remington

Remington HC5800 Manual de usuario

Remington

Remington HC331 Manual de usuario

Remington

Remington HC5350/5550/5750 Manual de usuario

Remington

Remington X6 POWER-X Series Manual de usuario

Remington

Remington HC-5010 Manual de usuario

Remington

Remington Power X Series Manual de usuario

Remington

Remington HC650 Manual de usuario

Remington

Remington Classic HC450 Manual de usuario

Remington

Remington ProPower HC7151 Manual de usuario

Remington

Remington HC5900 Manual de usuario

Remington

Remington HC5950 Manual de usuario

Remington

Remington Compact Beard Groomer MB-20 Manual de usuario

Remington

Remington PrecisionCut HC5302 Manual de usuario

Remington

Remington HC-70 Manual de usuario

Remington

Remington HC-70 Manual de usuario

Remington

Remington HC535 Manual de usuario

Remington

Remington HC9700 Manual de usuario

Remington

Remington ProPower HC7110 Manual de usuario

Remington

Remington HC5870AU Manual de usuario

Remington

Remington Shortcut clipper SCC-100R Manual de usuario

Remington

Remington HC-822A Manual de usuario

Remington

Remington HC9700 Manual de usuario

Remington

Remington HC4250 Manual de usuario

Manuales populares de Cortapelos de otras marcas

Clatronic

Clatronic HSM 800 Manual de usuario

Mellerware

Mellerware MACRO ALDANY MA20001 Manual de usuario

Create

Create CLIPPER EASY Manual de usuario

VALERA

VALERA X-Master 652 Manual de usuario

Wahl

Wahl 1870Li Manual de usuario

Lister

Lister Legend Manual de usuario

Philips

Philips HC5440/80 Manual de usuario

Andis

Andis MBA 23125 Manual de usuario

Philips

Philips Philishave HQC488/61 Manual de usuario

Shear Magic

Shear Magic Nifty 1800 Manual de usuario

Philips

Philips QC5390 Manual de usuario

Andis

Andis US-1 Guía de referencia rápida

Panasonic

Panasonic EH-KA81 Manual de usuario

Philips

Philips HC5450 Manual de usuario

Andis

Andis US-1 Instrucciones de instalación

Andis

Andis ML Instrucciones de instalación

O'Barber

O'Barber MINI SLIDE Manual de usuario

Oster

Oster 76110 Manual de usuario