Reiss CD10.1 Manual de usuario
Operating instructions
TARAtec sensors
CD10.1, OZ10.1
Februar 2022 (EN)
V3
Table of contents
2 / 40 TARAtec 10.1
Table of contents
1Information about these operating instructions..................................4
1.1 Symbols and displays ................................................................4
1.2 Associated documents...............................................................5
2Information on this product..................................................................6
2.1 Product description....................................................................6
2.2 Scope of supply.........................................................................8
2.3 Product overview .......................................................................9
2.4 Name plate..............................................................................10
3Safety ..................................................................................................11
3.1 Use for the intended purpose...................................................11
3.2 Use other than for the intended purpose...................................11
3.3 Personal qualifications .............................................................12
3.4 Rebuilding and modifications....................................................12
3.5 Residual risks ..........................................................................12
4Commissioning...................................................................................16
4.1 Installation requirements..........................................................16
4.2 Preparation of the sensors.......................................................16
4.3 Insertion into the flow chamber.................................................18
4.4 Electrical connection................................................................19
4.5 Initial calibration.......................................................................21
5Calibration...........................................................................................22
6Removal ..............................................................................................24
7Maintenance........................................................................................25
7.1 Maintenance overview .............................................................25
Table of contents
TARAtec 10.1 3 / 40
7.2 Changing the electrolyte and membrane cap............................25
8Troubleshooting .................................................................................27
8.1 Fault overview..........................................................................28
8.2 Special checks.........................................................................35
9Technical data.....................................................................................38
10 Deinstallation and storage .................................................................38
11 Disposal ..............................................................................................38
12 Warranty..............................................................................................39
13 Liability disclaimer..............................................................................39
Information about these operating instructions
4 / 40 TARAtec 10.1
1 Information about these operating instructions
1.1 Symbols and displays
1.1.1 Safety and warning instructions
The hazard symbols and signal words listed below are used in these
operating instructions. They help you use the product safely, protect the
operating personnel against injuries and protect the operating company
against damage to property and additional costs.
Signal word Meaning
DANGER! DANGER means a hazard with a high degree
of risk which if not avoided will lead to death or
serious injury.
WARNING! WARNING means a hazard with a medium
degree of risk which if not avoided may lead to
death or serious injury.
CAUTION! CAUTION means a hazard with a low degree of
risk which if not avoided may lead to minor or
moderate injury.
NOTE NOTE warns against damage to property.
Tab. 1: Signal words
Information about these operating instructions
TARAtec 10.1 5 / 40
1.1.2 Labels in the text
Symbol Meaning
This symbol is the general warning symbol and warns
you about risks of injury. Take all the actions that are
indicated by this warning symbol.
This symbol indicates tips and helpful information for
optimum and economic use of the product.
This symbol indicates actions to be performed by the
personnel.
This symbol indicates the result of an action.
This symbol indicates individual bullet points.
This symbol indicates a precondition before
performing an action.
Tab. 2: Symbols in the text
1.2 Associated documents
Data sheets on the individual types of sensors can be found at the
following Internet address:
https://www.reiss-gmbh.com/english/datasheets.htm
Information on this product
6 / 40 TARAtec 10.1
2 Information on this product
2.1 Product description
The TARAtec 10.1 product range consists of sensors with covering
membranes.
They are 2-electrode systems for measuring the concentrations in water
of the disinfectants chlorine dioxide or ozone. The area of application of
these sensors extends to almost all water qualities.
The sensors are not suitable for checking the absence of chlorine dioxide
or ozone.
A complete measuring and/or control system normally consists of the
following components:
Sensor
Electrical leads and connectors
Flow chambers and connections
Measuring and control device
Dosing equipment
Analytical equipment
These operating instructions relate exclusively to the sensor.
Comply with the operating instructions for the peripheral
devices.
Information on this product
TARAtec 10.1 7 / 40
2.1.1 Chlorine dioxide CD10.1
The sensor measures the concentration of chlorine dioxide in the water
being measured. Such chlorine dioxide arises from the application of
chlorine dioxide (such as the acid/chlorite process, chlorine/chlorite
process). The chlorine dioxide sensor is insensitive to chlorine.
2.1.2 Ozone OZ10.1
The sensor measures the concentration of dissolved ozone in the water
being measured. The sensor is virtually insensitive to chlorine.
Information on this product
8 / 40 TARAtec 10.1
2.2 Scope of supply
Keep the all the packaging for the sensor.
In the event of repair or warranty please return the sensor in the
original packaging.
Check that the delivery is complete and undamaged.
If it is damaged:
Please contact your supplier.
Component Quantity Sensor with
voltage output
signal
Sensor with
4 - 20 mA
current loop output
signal
Sensor with
Modbus signal
transmission
(0…+/-2000 mV) (2-pole
screw
terminal
connection)
(5-pole-
M12-
connection)
Sensor with
membrane
cap
(depending on
the type)
1
Electrolyte
(depending on
the type)
1 bottle
mA hood with
O-ring 20x1.5 1 – – –
Special emery
paper
(depending on
the type)
1
Operating
instructions 1
Tab. 3: Scope of supply
Information on this product
TARAtec 10.1 9 / 40
2.3 Product overview
Fig. 1: Product overview
1 Electrical connection
2 Sensor body
3 Pressure compensation opening
4 Working electrode
5 O-ring 20 x 1.5
6 Membrane disc
7 Protective cap
8 Membrane cap
9 Electrode finger
10 Reference electrode
Information on this product
10 / 40 TARAtec 10.1
2.4 Name plate
A name plate is glued to each sensor, this shows the following
information:
Fig. 2: Example of a name plate
1 Measured variables
2 Sensor designation, sensor name
3 Nominal measuring range of the sensor
4 Permissible temperature range of the measuring water
5 Maximum permissible pressure of the water being measured
6 Signal transmission
7 Power supply
8 Serial number
9 Serial number as barcode
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios de Reiss
