Red Shed 1558325 Manual de usuario
1
Please read instructions carefully before use. Retain for future reference.
Assembled Dimensions
6.5 FT LIBERTY
SPRUCE with CLEAR
LIGHTS
Instruction Manual
SKU# 1558325
2
IMPORTANT SAFETY INSTRUCTIONS:
•This tree includes a proprietary lighting power system (PAT.-US 8905771 B2) certificated by
UL/CUL.
•Make certain to open the caps before assembling the poles.
•When adjusting branches make sure all wires are free from the branch hinges
•This is an electrical product –not a toy! To avoid risk of fire, burns, personal injury, or
electrical shock it should not be played with.
•Do not mount or place near gas or electric heaters, fireplaced, candles, or other similar
sources of heat.
•Do not cover product with cloth, paper or any material when product is in use.
•Do not hang ornaments or other objects from the cord, wire or light strings. Hang ornaments
only on the tree branches.
•For your safety, unplug the product if left unattended.
•Do not let bulbs rest on the supply cord or on any wire.
•Do not close doors or windows on the product or cord as this may damage the wire
insulation.
ASSEMBLY INSTRUCTIONS:
1. Assemble the tree stand on a level surface. Twist open
the base. Then tighten the screws at the top of the
base to secure the legs into place as seen in Fig. 1.
2. Each section of the tree is labeled with a tag indicating
A (top section), B (middle section), and C (bottom
section). Please identify these sections before
assembling and remove the caps from pole end as
seen in Fig. 2.
3. Insert the bottom section (C) into the assembled stand.
Ensure the pole is firmly inserted and secured into the
stand before adding the next section. Next insert the
middle section (B) to the bottom section (C), followed by
the top section (A) into the middle section (B) as seen in
Fig. 2.
4. Once the tree sections are put together, gently shape
all branches and tips into place. Begin by shaping the
tips located closest to the interior pole. For each
branch, position one tip to the right, one tip to the left,
and one at the center of each main stem. Repeat this
pattern for each branch until complete.
5. Plug your tree into a wall outlet.
6. Step on the foot pedal to turn the tree on.
USE AND CARE INSTRUCTIONS:
•Inspect product carefully before using or reusing.
•To store, disassemble the tree and place in its original
box. Store tree in a cool dry place where the
temperature does not exceed 100 degrees Fahrenheit.
•This product is for indoor use only and is for decoration only.
•Not a toy and not intended for children.
Fig.1
Fig.2
C
A
B
Stand
3
•If any lights do not work on your pre-lit tree, please check the following:
a. If the entire tree, or tree section (top, middle, bottom) does not light:
i. Gently turn the pole to make sure the poles are properly connected into
place.
ii. Check to see if all plugs are properly connected and verify the power cord is
plugged into the wall outlet.
iii. Check On/Off Foot Pedal to ensure it is in the ON position.
iv. Check the fuses in the tree’s extension cords and replace if necessary, using
the Fuse Replacement steps below. Please note, this tree utilizes an 8-Amp
extension cord fuse, which is different than a 3-Amp fuse utilized in the mini
light sets.
b. If a strand of lights doesn’t not light:
i. Check that all bulbs tightly fit inside their sockets and ensure no bulbs are
broken or missing. Replace broken or missing bulbs with the provided
replacement bulbs. See the Bulb Replacement section for further
instructions). If all bulbs are firmly in the sockets, slightly twist the bulbs from
side to side to ensure proper connection.
ii. Check the fuse in the mini light cord and replace if necessary. IMPORTANT:
This is the only time you should remove the tape wrapping the outlets of the
mini lights. Please remove tape to inspect 3-Amp fuse and replace tape to
original condition after inspecting.
iii. If the lights still do not work, carefully remove each bulb, one by one, from the
problem light string. Pull both the bulb and plastic base straight out of the
socket. Do not twist bulbs while removing from sockets. Check the two wires
located at the bottom of the bulb holder. Each wire should be aligned properly
on the bulb holder to ensure a proper connection with the lamp socket. If one
wire is missing, or too short, please replace it
with the provided replacement bulb.
•Fuse Replacement: This product comes with overload
protection (fuse). A blown fuse indicates an overload or
short circuit. If a fuse blows, first unplug tree from the wall
outlet. Then, replace the fuse, per the instructions below and
follow product marking for the proper fuse rating. If the
replacement fuse blows, a short circuit may occur, and the
product should be reviewed to determine the cause.
a. Light set fuse replacement (replaceable 3-amp 125V
fuses are located in the plug, as seen in Figure 3.)
i. Ensure the plug is dismantled from the plug
body as seen in Figure 4.
ii. Grasp the plug and remove from its power
source.
iii. Locate the blown fuse by sliding access cover
on top of the plug towards prongs.
iv. Remove the blown fuse by turning the plug
over. The fuse should fall into your hand.
Gentle tapping may be required to dislodge
the fuse.
Fig. 3
Fig. 4
4
v. Locate the spare replacement fuses in the spare parts bag.
vi. Insert the new fuses. Close the fuse cover by sliding the fuse access cover
towards the cord.
vii. CAUTION: To reduce the risk of fire –replace the fuse in mini light sets with
only 3-amp 125-volt fuse. Do not replace the attachment plug. Discard the
product if the attachment plug is damaged.
b. Extension cord fuse replacement (replaceable 8-amp 125V fuse is located in the
plug, as seen in Figure 5):
i. Grasp the plug and remove from its power
source.
ii. Locate the blown fuse by sliding access cover
on top of plug towards prongs.
iii. Remove the blown fuse.
iv. Locate the replacement fuse holder attached
to cord near the plug. Open the holder and
remove the replacement fuse.
v. Insert the new fuse. Close the fuse cover by
sliding fuse access cover towards the cord.
vi. CAUTION: To reduce the risk of fire –replace the fuse in mini light sets with
only 8-amp 125-volt fuse. Do not replace the attachment plug. Discard the
product if the attachment plug is damaged.
•Bulb Replacement:
a. Make certain the tree is unplugged from the electrical outlet.
b. Pull the bulb and plastic base straight from its socket. Do not twist bulbs while you
are removing them.
c. Additional bulbs are included in the spare parts bag. Replace burned-out bulbs with
replacement bulbs included with this product packing only.
•This product contains a cord with a polarized plug to reduce electrical shock. If the plug
doesn’t fit fully into the outlet, reverse the plug as it is designed to only fit one way. If the
plug still does not fit, contact a qualified electrician. Do not use this product with an
extension cord unless the plug can be fully inserted. Do not alter or replace the plug.
For Decoration Only.
Not a Toy.
Not intended for children.
Distributed by TRACTOR SUPPLY COMPANY
5401 Virginia Way, Brentwood TN 37027
For customer support call 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Fig.5
Tabla de contenidos
Manuales populares de Pino artificial de otras marcas
Trim a Home
Trim a Home TY-S6-250L Manual de usuario
Polygroup
Polygroup TG7600NVQC03 Manual de usuario
Sears
Sears Donner & Blitzen M44814 Manual de usuario
BETHLEHEM LIGHTING
BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario
Home Accents Holiday
Home Accents Holiday TG76P3D93L08 Manual de usuario
Polygroup
Polygroup TG76M3S45C02 Manual de usuario
Polygroup
Polygroup TG90P3693L00 Manual de usuario
Costway
Costway CM23595US Manual de usuario
Polygroup
Polygroup TV46M3ADVC05 Manual de usuario
Home Accents Holiday
Home Accents Holiday TG76P4C15D03 Manual de usuario
Polygroup
Polygroup TV46P7001X00 Manual de usuario
Holiday Living
Holiday Living TV40EH339C01 Manual de usuario
