Red Hat SATELLITE 5.3.0 RELEASE NOTES Manual de instrucciones
Red Hat Network
Satellite 5.3.0
Release Notes
Red Hat Network Satellite
Release Notes
Red Hat Network Satellite 5.3.0 Release Notes
Red Hat Network Satellite
Edition 2
Copyright © 2010 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons
Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available
at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this
document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert,
Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity
Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
All other trademarks are the property of their respective owners.
1801 Varsity Drive
Raleigh, NC 27606-2072 USA
Phone: +1 919 754 3700
Phone: 888 733 4281
Fax: +1 919 754 3701
PO Box 13588 Research Triangle Park, NC 27709 USA
iii
1. Major Features 1
2. Major Corrections 3
A. Revision History 5
iv
Chapter 1.
1
Major Features
The following are the major features released as part of Red Hat Network Satellite 5.3.0.
• RHN Satellite includes a significant update to the Multiple Organizations feature, which allows
administrators to view, create, and manage multiple organizations across the Satellite.
• Trust relationships between organizations are now supported, allowing Satellite Administrators to
establish mutual connections between two or more organizations.
• Organizations within a trust can share their custom content channels with each other, provided
that the Organization Administrator or Channel Administrator gives access to the custom channel
in the channel sharing configuration.
• Organization Administrators can now migrate systems from one trusted organization to another.
The system configuration history (such as entitlements, software and configuration channels, and
virtual guest associations) are preserved. The destination organization can then configure the
system for their purposes.
For more information about multiple organizations feature, refer to the Red Hat Network Satellite
Reference Guide.
• RHN Satellite now supports automated system installation via the cobbler installation server.
Administrators can use Cobbler to store, manage, and automate several aspects of system
installation and provisioning, from package installation and channel subscription to DHCP and DNS
configuration. Administrators can also use the koan tool to re-provision existing systems and guests
in a virtualized system. For more information about using Cobbler and Koan, refer to the Red Hat
Network Satellite Reference Guide.
Note
Installation of cobbler packages overwrites existing files in the /tftpboot/ directory.
If you intend to continue running PXE services on RHN Satellite 5.3.0 server, you must
backup and rename the existing /tftpboot/ directory before installing or upgrading to
Satellite 5.3.0.
• RHN Satellite now features Inter-Satellite Sync support, which allows Satellite Administrators to
synchronize channel content from one master Satellite server to one or more slave Satellites,
regardless of location. For more information about using Inter-Satellite Sync, refer to the Red Hat
Network Satellite Installation Guide.
• Red Hat Network Satellite 5.3.0 now allows users to install RHN Satellite and RHN Proxy Server
server within a VMWare guest system, in addition to support for installation on Xen guests from
previous Red Hat Network Satellite releases.
• New and updated search features are now available in RHN Satellite 5.3.0, including:
• Improvements to the errata and system search are now available. Errata can now be queried
using a Free Form search that supports using field names to restrict results to certain keywords
such as package name, package description, filename, and more.
Chapter 1. Major Features
2
• Search results have been improved with fuzzy string support, which will display approximate
matches to find results that are spelled similarly to the queried term.
A Documentation Search feature has been added to the Satellite Help page. You can search all
of the RHN Satellite and RHN Proxy Server documentation, including the Reference Guide, the
Installation Guide for both Satellite and Proxy, the Release Notes, and more
For more information about using search, refer to the Red Hat Network Satellite Reference Guide.
• The RHN Satellite Application Programming Interface (API) has been expanded and now features
several new calls, including new calls for the multiple organizations feature, Cobbler installation
server, and system and errata search.
• RHN Proxy Server now supports command-line installation via the configure-proxy.sh
program, which allows administrators to install RHN Proxy Server through a series of interactive
prompts. For more information on using the command-line installation program, refer to the Red Hat
Network Proxy Installation Guide.
• RHN Satellite now supports multiple architectures within a single registered system that is running
Red Hat Enterprise Linux 4.8.0 or later and Red Hat Enterprise Linux 5.3.0 or later. RHN Satellite
now displays the architecture of installed or available packages when queried along with package
names; and users have a choice to install, update, or remove packages according to architecture.
• RHN Satellite and RHN Proxy Server now feature support for SELinux targeted policy in
enforcing or permissive on Red Hat Enterprise Linux 5.3.0 or later. SELinux is a set of secure
software policies that implement mandatory access control to Red Hat Enterprise Linux and other
operating systems. SELinux is activated by default on Red Hat Enterprise Linux, and now users can
have SELinux in enforcing or permissive mode with the targeted policy during installation of
Proxy or Satellite.
Note
Installation on an SELinux system is only supported in Red Hat Enterprise Linux 5.3.0
or later, and is not supported on Red Hat Enterprise Linux 4.
• SELinux modules that support Monitoring of RHN Satellite and RHN Proxy Server on Red Hat
Enterprise Linux 5 are now available. Note that because this feature is a Technology Preview, it may
not be functionally complete and is currently not supported for production use.
For more information, refer to http://kbase.redhat.com and use the keyword "SELinux Monitoring".
• RHN Satellite now supports Solaris for UltraSPARC T1 (sun4v) and X86_64 processors.
Chapter 2.
3
Major Corrections
The following are the major bug fixes and workarounds released as part of RHN Satellite 5.3.0.
• File paths related to the Monitoring feature of RHN Satellite have been rewritten to conform to
the Linux Standards Base (LSB). Monitoring files that were once in the /opt directory have
been moved to /usr/bin/ for executable scripts, /var/log/ for log files, and /var/lib/ for
associated library files.
For example, to execute the script called monitor-queue, instead of typing /opt/
notification/scripts/monitor-queue you can now type monitor-queue or /usr/sbin/
monitor-queue at a shell prompt.
•rhn-proxy and rhn-satellite are no longer running services. All services related to RHN
Proxy Server and RHN Satellite functionality (httpd, jabberd, tomcat, Monitoring, Monitoring
Scout, and the database service) can be stopped, started, and restarted individually.
You can stop, start, or restart all Satellite services at once using the following command:
/usr/sbin/rhn-satellite {stop|start|restart}
You can stop, start, or restart Proxy using the following command:
/usr/sbin/rhn-proxy {stop|start|restart}
• The default Virtualization Type when creating a kickstart profile has been changed from none
(which is no longer an option) to Xen para-virtualized Guest. If you do not intend to creat a
kickstart profile for virtual guest, you should leave it at the default and it will not affect your profile.
• RHN Satellite no longer supports kickstart distributions located outside of the Satellite server. All
distributions must be synced and located on the Satellite server itself.
• The Nocpulse home directory has been moved from /home/nocpulse to /var/lib/nocpulse.
Nocpulse is now created as system account with uid of less than 500.
• An issue has been fixed where Monitoring would fail to run with an external database that had a
different name than the database instance name.
• Monitoring probes now work even when the SSH daemon has defined banner text.
• An issue has been fixed where repomd cache files were broken for custom channels on RHN Proxy
on RHEL 5 systems.
To resolve this issue, after reinstallation of Proxy, run the following command:
rm -f /var/spool/rhn-proxy/list/*
• Monitoring code has been refactored and all files from the /opt/ directory related to Monitoring
have been moved to their proper directories (/etc/nocpulse/, /var/lib/nocpulse/, /var/
log/nocpulse/, and /var/log/notification).
Chapter 2. Major Corrections
4
• Mail for the nocpulse user is now forwarded to root (as defined in the /usr/lib/
nocpulse/.forward file).
• Monitoring log files now include date and timestamps for every record.
• A new configuration option, enable_snapshots, has been added to the /etc/rhn/rhn.conf
file. This allows administrators to enable or disable capturing system snapshots. By default,
snapshots are enabled; to disable it, edit the enable_snapshots option to the following:
enable_snapshots=0
• RHN Satellite 5.3.0 now has the ability to purge system snapshots via the API.
• Subsystem script /etc/rc.d/init.d/osa-dispatcher now returns correct status.
• TNSping monitoring probe has been rewritten to work with Oracle Instant Client.
• When using Satellite with SELinux enabled, if /var/satellite/ is changed to an NFS mount
after the initial installation, you must run the following command:
/usr/sbin/setsebool -P spacewalk_nfs_mountpoint 1
5
Appendix A. Revision History
Revision 1.0 Fri Feb 27 2009
Revision 2.0 Mon Jun 7 2010 John Ha
6
Otros manuales para SATELLITE 5.3.0 RELEASE NOTES
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de Red Hat
Red Hat
Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT Guía de referencia rápida
Red Hat
Red Hat DIRECTORY SERVER 7.1 - DEPLOYMENT Guía de referencia rápida
Red Hat
Red Hat JBOSS ON Manual de usuario
Red Hat
Red Hat 8.1 Manual de instrucciones
Red Hat
Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT Manual de usuario
Red Hat
Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT Manual de usuario
Red Hat
Red Hat 8.1 Manual de instalación
Red Hat
Red Hat LINUX VIRTUAL SERVER 4.6 - ADMINISTRATION Manual de usuario
Red Hat
Red Hat DIRECTORY SERVER 8.1 - 11-01-2010 Manual de usuario
Red Hat
Red Hat DIRECTORY SERVER 7.1 - PLUG-IN PROGRAMMERS Manual de usuario
Red Hat
Red Hat DIRECTORY SERVER 8.1 - USING THE ADMIN... Manual
Red Hat
Red Hat NETWORK SATELLITE 5.0.0 - Manual de usuario
Red Hat
Red Hat DIRECTORY SERVER 7.1 Manual de usuario
Red Hat
Red Hat DIRECTORY SERVER 7.1 - ADMINISTRATOR Manual de servicio
Red Hat
Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT Manual de programación
Red Hat
Red Hat SATELLITE 5.3.0 RELEASE NOTES Manual de instrucciones
Red Hat
Red Hat DIRECTORY SERVER 2.0 - GATEWAY Manual de referencia
Red Hat
Red Hat NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT Manual de usuario
Red Hat
Red Hat 8.1 Guía de referencia rápida
Red Hat
Red Hat LINUX VIRTUAL SERVER 4.5 - ADMINISTRATION Manual de usuario
