RecorderGear TR600 Manual de usuario
USER
MANUAL
Diagram 1
Diagram 2
Diagram 3
Diagram 4
1 Year Warranty
All RecorderGear™ brand products are backed by our
1 Year Warranty. For full details visit
www.recordergear.com
MID: AR100
1 Insert SD card
2 Navigation
3 Line Mode
4 Handset Mode
5 Mic Mode
6 Settings
7 Playback
8 Software
9 Software Overview
10 Specs
6
7
7
10
14
16
18
20
21
25
Table of Contents
6
1Insert SD card
The TR600 supports up to a 32GB SD card. Do not
power on the TR600 before inserting an SD card.
1. Insert an SD card into the SD card slot. We
recommend using a brand new class 10 SD card.
2. You will feel and hear a click when the card has
been inserted correctly.
3. To remove the SD card, push the card in until
you hear and feel a spring release; the SD card
will be ejected when you let go.
NOTE:
The TR600 will not power on if no SD card is
inserted.
NOTE:
If SD card is ejected when TR600 is powered on
there will be a load beep and a SD card error.
7
2 Navigation
3 Line Mode
As you are navigating your TR600 use the select
keys on the top right and top left labeled “Left
Select Key” and “Right Select Key” to enter into
and select options. Use the the button labeled
“Back Button” to return to the previous screen.
(see Diagram 1)
Line mode is for connecting your TR600 directly
to an analog phone line.
8
ENTER LINE MODE:
1. Connect the phone line provided to the phone
port of the TR600.
2. Connect the wall line to the line port.
(See Diagram 3)
3. Insert the SD card provided.
4. Put in the AAA batteries provided.
5. Using the power cord provided, plug the
TR600 into a wall outlet.
6. Make sure the source switch on the side of the
TR600 is slid to the PHONE position.
7. Press the right select key to enter settings.
8. Select Recording Settings.
9. Enter Manu Rec. Mode and select Line Mode.
NOTE:
The AAA batteries are used as a back up when
the TR600 is not connected to a power source.
LINE MODE SETTINGS:
The Line Mode has 2 different modes. The 2
different modes are explained below.
Both modes can be found in Recording Settings
under Auto / Manual Rec.
Manual Recording Mode:
Manual recording is when you start and stop the
recording yourself.
9
1. To enter this mode first enter Recording
Settings.
2. Then enter Auto / Manual Rec and select
MANUAL.
3. To Start recording in manual mode press the
RECORD button on the TR600 when you answer
a phone call.
4. To Stop the recording press the STOP button.
Auto Recording Mode:
Auto Recording is when the TR600 automatically
begins recording when you pick up the phone
and stops when the call is completed.
1. To enter this mode first enter Recording
Settings.
2. Then enter Auto / Manual Rec and select AUTO.
NOTE:
“TRIG”(Trigger) mode also known as Voice
Activation mode will not work in line mode.
Note: You are able to change additional settings
in Recording setting. (see settings section)
10
4 Handset Mode
This mode is for connecting your TR600 to Digital
PBX telephones, IP telephones, and Multi-Line
telephones.
ENTER HANDSET MODE:
1. Connect the cord of your phone line to the
TR600 phone line handset port.
2. Using the line Cord provided connect the
TR600 to the phone system through the line
handset port. (See Diagram 4)
3. Insert the SD card provided.
4. Put in the AAA batteries provided.
Otros manuales para TR600
2
Tabla de contenidos
Otros manuales de Grabadora de voz de RecorderGear
