Rear view safety MobileMule 5500/8150 Manual de usuario

MobileMule™ 5500/8150

4/8 Channel Mobile DVR

With Built-In GPS

Instruction Manual

Please read and understand this manual before use.

Thank you for choosing our the MobileMule™ 8150/5500. Because of product

upgrades, some features many be different than described in this manual. Please

contact the manufacturer with any questions. Information contained in this manual

is subject to change without prior notice.

Mobilemule™ 5500/8150

This manual is for both the MobileMule™ 8150 and the MobileMule™ 5500. The information in this

manual may not apply to each product.

1. Placement



Quick Tips

Notice

Install the device in a secure area to decrease shock/vibration damage.

To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as a trunk),

Keep the device 15 cm away from objects on the same plane.

Install the device horizontally and away from water/humidity.

Do not drive the vehicle during installation.

Keep the device, camera, cables and other accessories out of reach of passengers and driver.

Mobilemule™ 5500/8150

2.Avoiding Electric Shock



Power input: 8-36V DC power

Make sure device is off before connecting any cables.

Do not touch the power supply or device with wet hands;

Do not spray liquid on the device in case of internal short circuit or fire.

Do not place any other device directly on top of the camera.

Do not disassemble the housing.

3. Transport and Handling



Handle device with care and use original packaging materials and carton when transporting.

Turn device off before attaching/replacing any parts.

Mobilemule™ 5500/8150

Table of Contents

I. Product Description ................................................................................................................................ - 1 -

1. Product overview .................................................................................................................................- 1 -

2. Technical specifications. .......................................................................................................................- 2 -

3. Mainframe introduction........................................................................................................................- 6 -

4. Introduction to remote control.. ............................................................................................................- 8 -

. Device Installation ...................................................................................................................................... - 10 -

Installation ............................................................................................................................................- 10 -

Step 1: Open the protective cover ...................................................................................................- 10 -

Step 2: Prepare the HDD .................................................................................................................- 10 -

Step 3: Insert the HDD ....................................................................................................................- 11 -

Step 4: Install SIM and SD cards ....................................................................................................- 12 -

Step 5: Locking the electric lock .....................................................................................................- 13 -

Step 6: Install the mainframe ..........................................................................................................- 13 -

Step 7: Install GPS, 3G/4G, WiFi antenna ......................................................................................- 13 -

Step 8: Connect the power cord ......................................................................................................- 14 -

Step 9: Connect the display output unit ..........................................................................................- 15 -

Step 10: Alarm input and output cable ............................................................................................- 16 -

Step 11: RS232 device connection ................................................................................................. - 17 -

Step 12: Connect PTZ .................................................................................................................... - 18 -

MobileMule™ 5500/8150

Step 1: Go to General Settings................................................................................................. .........- 22 -

Step 2: Set Date & Time ...................................................................................................................- 22 -

Step 3: Set Vehicle Info... ................................................................................................................. - 23 -

Step 4: User Setup ............................................................................................................................ - 23 -

Step 5: Network Setup ..................................................................................................................... - 24 -

Step 6: Display Setup ....................................................................................................................... - 25 -

1.Channel Settings.................................................................................................................................. .- 26 -

2. Channel Mode ...................................................................................................................................... - 26 -

3. Recording Setup: ................................................................................................................................... - 28 -

Step 1: Enter the Record Setup Interface ......................................................................................... - 28 -

Step 2: Record Basic Setup .............................................................................................................. - 28 -

Step 3: Main Code ............................................................................................................................ - 29 -

Step 4: Sub-Stream Setup ................................................................................................................. - 30 -

Step 5: Recording Schedule (Set in timing record mode)................................................................ .- 31 -

Step 6: Mirror Record ...................................................................................................................... - 32 -

Step 7: SD Record ............................................................................................................................ - 32 -

Step 8: Alarm Record ....................................................................................................................... - 33 -

Step 9: IPC ....................................................................................................................................... - 34 -

4. Alarm Setup: ........................................................................................................................................ - 35 -

Step 1: Enter the Alarm Setup interface ........................................................................................... - 35 -

Step 2: Sensor Setup......................................................................................................................... - 36 -

Step 3: Speed Setup .......................................................................................................................... - 36 -

Step 4: G-sensor Setup ..................................................................................................................... - 37 -

Step 5: Temperature Setup ............................................................................................................... - 38 -

Step 6: Linkage Setup ...................................................................................................................... - 38 -

III. Basic Settings.....................................................................................................................................................- 21 -

MobileMule™ 5500/8150

Step 7: Motion Detection ................................................................................................................. - 39 -

5. Configuration: ...................................................................................................................................... - 41 -

Step 1: Configuration Management ..................................................................................................- 41 -

Step 2: Formatting ............................................................................................................................ - 42 -

Step 3: Log Search ........................................................................................................................... - 43 -

6.Peripheral Setup: ................................................................................................................................... - 43 -

Step 1: Enter the Peripheral Setup interface ..................................................................................... - 43 -

Step 2: PTZ ...................................................................................................................................... - 44 -

Step 3: Wireless Setup ...................................................................................................................... - 44 -

Step 4: WiFi Setup ........................................................................................................................... - 45 -

Step 5: Oil Setup .............................................................................................................................. - 46 -

Step 6: Serial Device Setup .............................................................................................................. - 47 -

Step 7: BSM Setup ............................................................................................................................- 47 -

7. System Information: ............................................................................................................................. - 48 -

Appendix 1: Frequently Asked Questions ........................................................................................................ - 49 -

Appendix 2: Storage Table.................................................................................................................................- 55 -

Upgrading ................................................................................................................................................. ......- 57 -

Notes..................................................................................................................................................................- 57 -

Mobilemule™ 5500/8150

-1 -

Product Description

Supports H.264 compression encoding 5500:100fps@720P PAL, 8150:200fps@960H PAL

5500/8150 support 4/8 channel audio/video recording and playback simultaneously.

Air video interface provides reliable shock protection

Built-in 3G/4G network, GPS, WiFi (optional)

Built-in 2.5" HDD, max. 2TB HDD supported, damping technique.

Good scalability, 1 RS485 interface, 2 RS232 interfaces

MobilemMule™ 5500/8150

1. Product Overview

The MobileMule™ 5500/8150 is a 4/8 channel mobile DVR. It uses an ARM DSP fast dual-

core processor running on the Linux embedded OS, and integrates the most advanced H.264

video encoding/decoding in IT industry. It has 3G/4G network capability, GPS, and fail-safe

protection against HDD vibration and overheating.

-2 -

Voltage Input: 8V-36V

Voltage Output: 12V (+/- 0.2V)

Operating temperature: -40℃ ～ + 80℃

2. Technical Specifications

Item Parameter MobileMule™ 5500 MobileMule™ 8150

System

Language Chinese/English

Operating

Interface Graphical User Interface (OSD menu)

Password &

Security User password and Admin password management

Video

Video input

Supports 4 channels

CIF/HD1D1/960H

Supports 4 channels 720P AHD

Supports 8 channels CIF/HD1/D1/960H

Supports 8 channels 720P AHD

Video

Output 2-way CVBS video output: 3.5mm Phone Jack/24PIN connector

Video

Display Supports 1~5 monitors Supports1~9 monitors

Video

Standard PAL/NTSC

MobileMule™ 5500/8150

-3 -

Image

Compression

H.264 Main profile, PAL: 100 frames

720P/s, NTSC: 120 frames 720P/s

H.264 Main profile, PAL: 200 frames 960H/s,

NTSC: 240 frames 960H/s

Audio

Input 4 audio inputs 8 audio inputs

Audio

Output 2 audio outputs (3.5mm Phone Jack/24PIN connector)

Recording

Mode Synchronous video & audio recording

Image

Processing

& Storage

Image

Format

CIF/D1/960H/720P optional CIF/D1/960H optional

Video

Streaming

Standard

ISO14496-10

Video Bit

Rate

CIF: 1536Kbps ~ 128Kbps

HD1: 2048Kbps ~ 400Kbps

D1: 2048Kbps ~ 400Kbps

960H: 2048Kbps ~ 400Kbps

720P: 4096Kbps ~ 400Kbps

Eight picture quality levels are available, with level 1 being the highest and level 8

being the lowest

Audio Bit

Rate

40Kbps

Storage Max. 2T HDD/SSD

One SD card supported. When the HDD is damaged, recordings are backup up onto

SD card. (3G/4G module is optional)

Alarm

Alarm input

Eight alarm inputs. Toggle between the lower level alarm (1V or below) and upper

level alarm (5V or above)

Alarm

Output

One alarm output, the higher level of this output is up to 12V

Communication

RS485

Interface

One RS485 interface supported

MobileMule™ 5500/8150

-4 -

,nterface

RS232

Interface Two RS232 interfaces supported

Wireless

Optionalbuilt-in3Gcommunication PRGXOH

(HSUPA/HSDPA/WCDMA/EVDO/TD-SCDMA)

Optional built-in 4G communication module (FDD-LTE/TDD-LTE)

WiFi

Built-in WiFi module (optional)

GPS

,QWHUQDO*36PRGXOH5HDOWLPHJHRJUDSKLFFRRUGLQDWHVVSHHGLQIRUPDWLRQ

Sensor

Built-in G-Sensor

Supporting

Software

PC Playback

Analysis PC playback and vehicle analysis

CMS

management

software

Features of wireless network include video preview, GPS upload, alarm upload

and command issuance and parameter configuration

Software

Upgrade Supports front USB 2.0 interface and remote CMS upgrade

MobileMule™ 5500/8150

Tabla de contenidos

Otros manuales de DVR de Rear view safety

Rear view safety

Rear view safety Mobile Mule RVS-8170 Instrucciones de montaje

Rear view safety

Rear view safety RVS-424W Manual de usuario

Rear view safety

Rear view safety RVS-250C Manual de usuario

Rear view safety

Rear view safety RVS-5520 Instrucciones de montaje

Rear view safety

Rear view safety RVS-3710-DVR Manual de usuario

Rear view safety

Rear view safety RVS-2510-DVR Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario