RCA G27343 Manual de usuario

"°..

COLOR TV OW

oi •

Important Information

WARNING

To prevent fire or shock

hazard, do not expose this

TV to rain or moisture.

RIS_ OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates

"dangerous voltage" inside

the product that presents a

risk of electric shock or

personal injury.

This symbol indicates

important instructions

accompanying the

product.

To prevent electric shock, match wide blade of plug to wide

slot, fully insert.

Pour _viter les chocs 41ectriques, introduire la lame la plus

large de la fiche dans la borne correspondante de !a prise et

pousser jusqfi au fond.

Cautions Do not defeat the safety feature of the plug. The wide blade fits into the

wall socket only one way. If you need an extension cord, make sure it

matches the plug of the TV.

Operate TV only on 120 volts, 60 Hz AC power (normal house power).

For safety reasons, make sure any equipment or accessories connected to

this product bears the UL listing mark or CSA certification mark. If in

doubt, contact qualified service personnel.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user's authority to operate it.

Note To Cable TV Installer This reminder is provided to call your attention to Article 820-40 of the

National Electrical Code (Section 54 of the Canadian Electrical Code,

Part 1) which provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding system

of the building as close to the point of cable entry as practical.

Product

Registration

Please fill out the product registration card and return it immediately.

Returning this card allows us to contact you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof

of purchase. Attach it here and record the serial and model numbers in

case you ever need them. The numbers are located on the back of the TV.

Model No.

Serial No.

Purchase Date:

Dealer/Address/Phone:

Table of Contents

Important Information Warning, Product Registration

Quick Guide to Your TV Startup 2-3

Hook up your TV, Plug in the TV, Put Batteries in the Remote,

Turn on the TV, Place Channels in Memory, Set the Time

Basic Tour of the Remote 4

Power, Volume, Channel, Special, and Menu Buttons

Menu Basics 5

Colors, Menu Buttons, Moving through the Menus

Using Your Remote With Remote Buttons 6

Adjusting Your TV Overall Picture 7

Picture Settings 8

Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset

Sound Settings 9-10

Stereo, Tone, Speakers

Using Advanced Features Placing Channels in Memory/Autoprogram

Naming the Channels

Setting the Sleep Timer

Setting the Alarm Clock

Watching Closed Captioning

Setting Your TV for Antenna or Cable

References Front Panel Buttons

Displays on the Screen

Trouble Checks

Order Form for Parts

Glossary

Limited Warranty

Index

19-20

21-22

Quick Guide to Your TV

Startup

The steps below will get your TV connected and ready for watching.

For more details, see the page numbers listed.

1. Hook up your TV

Details are in the Connections

Guide. CONNECTIONS

GUIDE

Hook up any antennas, cables or

other equipment to your TV before

you follow the steps below.

2. Plug in the TV Plug the cord into the outlet,

matching the wide and the small

end of the plug with the outlet.

3. Put Batteries in the Remote A. Pull off the cover of the battery

compartment.

B. Place the two AAA batteries as

shown, matching the + and --

end of each battery in the

compartment.

C. Replace the cover.

Quick Guide to Your TV

Startup

4. Turn on the TV Press POWER on the remote.

Press POWER on the TV.

5. Place all available

channels in memory

(AutoProgram)

Details for adding and deleting

channels are on page 11.

)ontrols Alarm Ad

13 A. Press MENU until the Setup menu

is selected. This menu is white.

Press + to place channels in the

TV's memory (Autoprogram).

Wait until TV has cycled through

all the channels and returns to

original channel.

Press DONE.

6. Set the Time 12:21 AM

Adjust

Setup

Press MENU until the Alarm

menu is selected. This menu is

green.

The Clock is automatically

highlighted the first time you

set it. If it is not, press

CHANNEL down to highlight it.

Press -- to set the hour.

Press -!- to set the minutes.

PressDONE.

Quick Guide to Your TV

Basic Tour of the Remote

Basic information about your remote is shown below. This will give you a

general idea of how your remote works. For more details, see page 6.

Power Button

Volume, Channel, and Special

Buttons

Details are on page 6.

Turns the TV on and off.

Operates the TV.

Operates special features of the TV.

Menu Buttons

See next page for details. Changes the menus and features

on the screen.

Quick Guide to Your TV

Menu Basics

General information about using the on-screen menu system is shown

below. Details on using the remote buttons are on page 6. Many menu items

are explained in detail in Adjusting Your TV starting on page 7 and Using the

Advanced Features starting on page 11.

Colors

Yellow Green

I ILight

Blue

;ontrols Alarm Adjustj_

White

Press MENU repeatedly to see

each of the four menu colors.

Each menu has a different color

background as shown at the left.

Menu Buttons

These buttons are used with the

TV's menus to adjust the features.

You can use the menu buttons on

the remote or the front of the TV.

Moving through the Menus .

',ontrols Alarm A_djd'ust

Press MENU to move from

menu to menu.

Press CHANNEL up and down

to move up and down through

the features in the menu.

Press VOLUME +and - to

move left and right on the

menu lines.

Using Your Remote

With Remote Buttons

POWER

Turns the TV on and off.

PREV CHAN (Previous Channel)

Changes back and forth between

two channels.

Select a channel and then select

another. Press PREV CHAN to

switch between the two channels.

DISPLAY

Shows displays on the screen.

Clears menus from the screen.

MUTE

Switches the TV sound on or off.

CHAN Aand v

(Channel up and down)

Scansup and down through

channels in the TV's memory.

Moves up and down menus. See

Menu Basics on page 5.

VOL -!- and -

(Volume up and down)

Raisesand lowers sound.

Moves left and right on a menu

line. See Menu Basics on page 5.

Changes a feature setting.

RESET

Returns the picture adjustments to

the original settings.

DONE

Savesthe setup of a feature and

removes the menu from the screen.

INPUT

Switches between the TV channels

and Video 00/S-VID 00.

SKIP:30 (Commercial Skip)

Allows you to look at other

channels during commercials.

Each press adds 30 seconds. Use

the CHANNEL or number buttons

to scan the other channels. TV

switches back to original channel

when time runs out. Press DONE

to cancel SKIP.

Number Buttons

Selects any channel number.

Two numbers must be pressed for

each channel. Press 0 and 6 for

channel 6.

For three digit channels, press and

hold 1until 1- appears on the

screen. Then press the other two

numbers.

Shows menus on the screen and

moves from menu to menu.

Adjusting Your TV

Overall Picture

Follow the steps below to lighten or darken the overall picture without

changing the color levels.

1. Select the Controls Menu

Alarm Ad

Press MENU to select the Controls

menu. This menu is yellow.

2. Highlight Picture

Alarm Ad

Press GHANNEL down to

highlight Picture.

3. Use VOLUME + and - to

adjust the Picture

4. Press DONE

Press -!- to lighten the picture.

Press -to darken the picture.

Press DONE to save the setting.

Adjusting Your TV

Picture Settings

Follow the steps below to change the picture on the screen to your

personal setting. The chart below explains your options.

1. Select the Adjust Menu

2. Highlight item to change

Alarm

Press MENU repeatedly to select the

Adjust menu. This menu is light

blue.

Press CHANNEL down to

highlight the picture item you

want to adjust.

oUse VOLUME + or- to

adjust each item

4. Press DONE

Controls Alarm

Press + or -- to adjust each item.

Press DONE to save the setting.

Color

Tint

Bright(Brightness)

Sharp (Sharpness)

Autocolor I

Picture Reset

Press VOLUME + to: Press VOLUME - to:

Ill IIIInll IIIII IIIII II I IIII

Increase color richness Lower color to black and white

Give red tint to skin color Give green tint to skin color

Add more light to dark parts of Add more dark to light parts of

the picture the picture

....................................... r.................. ,.....

Show cleaner, clearer images Make picture more smooth

Turn on to keep Color and Tint in Turn off for manual adjustment

proper balance each time you of Color and Tint

change channels

Reset the picture back to the IReset the picture back to the

original settings 1original settings

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de RCA

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario