RCA IP115 Manual de usuario
http://www.elastix.org
RCA IP115 and Elastix Server
Setup Guide
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
2
1.0 Setup Diagram
Figure 1-1 is a setup diagram for a single RCA IP115 phone configuration. The IP115 is
setup as a SIP telephony device.
Figure 1-1. Setup Diagram
2.0 Host PC Environment
Table 2-1. Host Server Environment Details
Description
Hardware Type
Elastix Appliance ELX-Series
Hardware Version
ELX-3000
Software Type
Elastix
Software Version
2.4
3.0 Test Setup Equipment
Table 3-1. Test Setup Equipment
Equipment
Model
Version
IP (SIP) Phone
N/A
N/A
RCA
IP115
V1.0.6.3-2980
Switch
N/A
N/A
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
3
4.0 Setup Procedure
To set up the Elastix Server for the RCA IP115
1. Go to the web address of the Elastix Server Login page. The web address is
determined by the customer, for this guide we have used the IP address
192.168.1.75
2. On the Login page, type the username and password for an administrative user into
the Username and Password fields, see Figure 4-1. The username and password are
determined by the customer.
Figure 4-1. Login
3. Press Enter or click on the Submit button to go to Elastix’s Dashboard
4. Once inside, click on the PBX tab on the menu at the top of the screen
Figure 4-2. Dashboard
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
4
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you
to the Add SIP Extension page, see Figure 4-3.
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
• User Extension (301 in this example)
• Display Name (“RCAPhone” in this example)
• secret (“h7Dka3Rf9si0t”in this example)
Figure 4-4. Add SIP Extension
7. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top
of the screen. Click on there to apply changes.
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
5
Figure 4-5
8. Click on “Submit” and apply changes. With this you have just finished creating a
SIP extension that will be used by the RCA IP115 to register with the Elastix
Server. Repeat Steps 5 through 7 to similarly create another extension (different
values on Step 6) to be used by the IP (SIP) Phone to register as well (extension 302
in this example). Once you finished you will see something similar to Figure 4-6.
Figure 4-6
9. With this you have finished configuring Elastix Server. Now you need to enter the
information from the extension created on the Elastix Server into the RCA IP115.
10. Log in to the RCA IP115 WebUI by pointing your browser to the IP115’s IP
address.
For the initial configuration, refer to the RCA IP115 User Manual found at:
http://www.rca4business.com/products-page/ipservice/ip-phones/ip115/
Factory default settings
LAN IP Address
DHCP
Web Access Username
root
Web Access Password
root
Set the IP Address in the same network as your Elastix Server.
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
6
11. After logging in your will see the main screen of the web interface (Figure 4-7).
Figure 4-7. IP115 WebUI
12. Go to “SIP Account => Account 1” and fill up the following fields (Figure 4-8).
Enable: Checked
Account Mode: VOIP
Display Name: RCAUser
Username: “301” in this example
Authenticate Name: “301” in this example
Password: “h7Dka3Rf9si0t” in this example
SIP Server: 192.168.1.75 (Elastix Server’s IP Address)
Figure 4-8. SIP Account
PaloSanto Solutions
RCA IP115 and Elastix Server Setup Guide
7
13. When done, click on the button “Submit”located at the end of the page. Now go to
the menu “Audio” and select the configuration of tones followed by the button
“Submit”. In this case we have chosen United States (see figure 4-9).
Figure 4-9. Audio
14. Now the RCA phone is registered with Elastix. Configure the other IP (SIP) Phone
with the correct parameters.
15. To test the RCA IP115, pick up the previously configured IP (SIP) Phone and call
the IP115’s extension number (301 in this example). When the call is established,
speak into the phone and verify that the other IP (SIP) Phone can hear your voice.
Check this by calling from both ends.
Otros manuales para IP115
1
Tabla de contenidos
Otros manuales de Teléfono de RCA
RCA
RCA 1123 Manual de usuario
RCA
RCA 25425 Manual del operador
RCA
RCA 25252 Manual de usuario
RCA
RCA 25415 Manual de usuario
RCA
RCA 25055RE1 Manual de usuario
RCA
RCA 25425RE1 - ViSYS Corded Phone Manual de usuario
RCA
RCA 25216RE1 Manual de usuario
RCA
RCA 1113 Manual de usuario
RCA
RCA 25260 Manual de usuario
RCA
RCA 25425 Manual de usuario
RCA
RCA 25252 Manual de usuario
RCA
RCA -29271RE3 - Nostalgic Retro Phone Manual de usuario
RCA
RCA 25201RE1 - ViSYS Corded Phone Manual de usuario
RCA
RCA 25425 Manual de usuario
RCA
RCA 25215RE1 Manual de usuario
RCA
RCA 25214RE1 Manual de usuario
RCA
RCA 25202 Manual de usuario
RCA
RCA 25270 Manual de usuario
RCA
RCA 25250 Manual de usuario
RCA
RCA 25255RE2 - ViSYS Cordless Phone Base Station Manual de usuario
