RCA RMANT1450 Manual de usuario

RMANT1450 / RMANT1450BF /

RMANT1450BFV /RMANT1450BR

Ampliﬁ ed Flat Multi-Directional

Indoor Antenna

Antena multidireccional plana ampliﬁcada para interiores

User’s Guide

Guía del Usuario

Congratulations on your purchase of the Ampliﬁed Flat Multi-Directional Indoor Antenna.

With this contemporary antenna, rabbit ears are a thing of the past. This sleek, attractive

antenna features the most advanced technology, including a patented engineering design that

provides excellent reception for both analog and digital TV broadcasts.

Multi-Directional Antennas

A multi-directional antenna is able to receive signals from any direction. Useful for both

analog and digital reception, the antenna looks great, facilitates optimal reception, and

requires very little space. The patented multi-directional technology ensures that the

antenna does not need to be adjusted according to the location of the transmitting signal.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate this equipment.

Industry Canada Regulatory Information

CAN ICES-3 (B)/NMB-3 (B)

Avis d’Industrie Canada

CAN ICES-3 (B)/NMB-3 (B)

English

Antenna Features

The Ampliﬁed Flat Multi-Directional Indoor Antenna is packed with features that make

it as functional as it is attractive. Because the antenna is multi-directional, there is no need

to constantly turn the antenna to improve reception. And, with its compact footprint, the

antenna is so unobtrusive, you can hang it on the wall, stand it up or lay it ﬂat. Its attractive

design complements any décor. The antenna:

• Features a removable ampliﬁer to optimize reception of local standard deﬁnition and

high deﬁnition signals

• Outperforms traditional antennas due to patented design

• Eliminates constant adjustments with multi-directional reception pattern

• Gets great reception in any position—lying ﬂat, hanging, or standing

• Takes up minimal space

• Features a modern, contemporary look

Antenna Hardware

Before attempting to use your antenna, please remove all parts from the box and read the

instructions carefully The antenna package includes the following items:.

1 Flat Multi-Directional Antenna with Built-In 6’ Coaxial Cable

1 Ampliﬁer Insert with Built-In Coaxial Cable

Removable Foot Stand

English

Setting Up the Antenna

Find the best location for the antenna

Before you connect the antenna, determine the best spot in your home for optimum

reception. Visit www.antennaweb.org to see where your local broadcasts are coming from.

Then, try as much as possible to avoid obstructions between these transmitters and your

antenna.

Because of its ampliﬁcation and multi-directional capabilities, the antenna receives UHF,

VHF, and local high-deﬁnition broadcasts, providing quality reception from most locations.

Note: The antenna may work well sitting on your TV or other components. However,

because electronic components can sometimes interfere with the antenna’s reception, you

might notice an effect on the antenna’s performance. Likewise, placing the antenna on

a metal surface may interfere with reception. If the antenna isn’t performing as well as

expected, try moving it away from the component or placing it on another surface. Then,

re-scan for channels on your TV or converter box.

Positioning the Antenna

After locating the optimal position for your antenna, choose from one of three options:

•Lay the antenna ﬂat The antenna has raised feet on its bottom to prevent scratching of

furniture. Make sure you place the antenna on a ﬂat, level surface.

Note: This is the position that usually gives optimal performance.

•Hang the antenna The back of the antenna antenna has two mounting holes that can

be used for hanging. Place both holes over screws inserted in your wall.

•Stand the antenna upright The antenna comes with a removable stand. Simply place

the antenna in the stand to prop the antenna in an upright position.

English

ANT1450

Built-In

Coaxial Cable

Amplifier

Insert

ANTENNA

TV/STB

To connect the antenna with the

ampliﬁer directly to your TV:

1. Make sure your TV is turned off.

2. Connect the antenna built-in cable to

the input jack of the ampliﬁer.

3. Connect the ampliﬁer’s built-in cable to

the antenna input on your TV.

4. Plug the ampliﬁer’s power cord into an

electrical outlet.

Important: This power unit is intended to be

correctly oriented in a vertical or ﬂoor mount

position.

5. Re-scan for channels on your TV.

To connect the antenna without the

ampliﬁer directly to your TV:

1. Make sure your TV is turned off.

2. Connect the antenna’s built-in coaxial

cable to the antenna input on your TV.

3. Re-scan for channels on your TV.

Connecting the Antenna

You can use the antenna with or without its ampliﬁer, depending on which connection gives

you the best signal. Try using the ampliﬁer ﬁrst. If you notice that you’ve lost channels that

you normally receive, try connecting without the ampliﬁer.

You can connect the antenna directly to your TV or use it with a converter box.

3 4

Built-In

Coaxial Cable

ANT1450

antenna

English

To connect the antenna with the

ampliﬁer to a converter box:

1. Make sure your converter box is turned

off.

2. Connect the antenna’s built-in cable to

the input jack of the ampliﬁer.

3. Connect the ampliﬁer’s cable to the

antenna input on the converter box.

4. Connect the converter box to your TV

using either audio/video cables or a

coaxial cable:

a. Audio/Video cable connection:

Connect the video (yellow) and stereo

audio (red and white) cables to the

video and audio outputs on your

converter box. Connect the other ends

to the video and audio inputs on your

TV. Make sure you match the colors

of the jacks on each—yellow plug to

yellow jack, red plug to red jack, and

white plug to white jack.

b.Coaxial cable connection: Connect a

coaxial cable to the antenna output on

your converter box. Connect the other

end of the coaxial cable to the antenna

input on your TV.

5. Plug the ampliﬁer’s power cord into an

electrical outlet.

Important: This power unit is intended to be

correctly oriented in a vertical or ﬂoor mount

position.

6. Re-scan for channels on your converter

box.

Converter Box

Coaxial

Cable

Audio/Video

Cables

Built-In

Coaxial Cable

ANT1450

–or–

Amplifier

Insert

ANTENNA

TV/STB

antenna

English

To connect the antenna without the

ampliﬁer to a converter box:

1. Make sure your TV is turned off.

2. Connect the antenna’s built-in coaxial

cable to the antenna input on your

converter box.

3. Connect the converter box to your TV

using either audio/video cables or a

coaxial cable:

a. Audio/Video cable connection:

Connect the video (yellow) and stereo

audio (red and white) cables to the

video and audio outputs on your

converter box. Connect the other ends

to the video and audio inputs on your

TV. Make sure you match the colors

of the jacks on each—yellow plug to

yellow jack, red plug to red jack, and

white plug to white jack.

b.Coaxial cable connection: Connect a

coaxial cable to the antenna output on

your converter box. Connect the other

end of the coaxial cable to the antenna

input on your TV.

4. Re-scan for channels on your converter

box.

Notes: See your converter box’s owner’s

manual for more detailed connection

instructions. For additional information

about setting up your converter box, visit

www.keepmytv.com

Converter Box

Coaxial

Cable

Audio/Video

Cables

Built-In

Coaxial Cable

ANT1450

–or–

antenna

English

Painting Your Antenna

You can paint the antenna to match your décor. Use only non-metal-based interior paint.

Coaxial Cable Installation Precautions

• Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause

shorts and can change a cable’s impedance.

• Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds

during installation. After installation, make sure there is no tension on the cable.

• Use only round-headed staples. Any clamps or securing devices used with coax should

grip the cable evenly about the circumference without crushing the cable. Flat staples can

damage the coaxial cable.

• Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep

the cable away from heating vents and water heaters.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Antena de RCA

RCA

RCA 5MS550 Manual de usuario

RCA

RCA ANT850E Manual de usuario

RCA

RCA ANT1400R Manual de uso y mantenimiento

RCA

RCA ANT800 - HDTV Antenna - Outdoor Manual de usuario

RCA

RCA ANT111Z Manual de usuario

RCA

RCA ANT1050 - HDTV / TV Manual de lista de piezas

RCA

RCA ANT2160E Manual de usuario

RCA

RCA ANT705Z Manual de usuario

RCA

RCA ANT115 Manual de usuario

RCA

RCA ANT1000 - Digital Flat Passive Ultra-Slim-Profile... Manual de lista de piezas

RCA

RCA ANT2ME Manual de usuario

RCA

RCA ANT800F Manual de usuario

RCA

RCA ANT1030 Manual de usuario

RCA

RCA ANT702F Manual de usuario

RCA

RCA ANT5000 Manual de usuario

RCA

RCA ANT1080E Manual de usuario

RCA

RCA ANT2020X Manual de usuario

RCA

RCA ANT1251F Manual de usuario

RCA

RCA ANT1550 - HDTV / TV Manual de usuario

RCA

RCA CANT1400F Manual de usuario

RCA

RCA ANT1450BR Manual de usuario

RCA

RCA ANT706A Manual de usuario

RCA

RCA ANT3036XR Manual de usuario

RCA

RCA ANT122E Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario