Razr PT800 Manual de usuario
1
Visualizer Users Manual
2
Contents
Directory 2
1. Precautions 4
2. Product Declaration 4
3. Appearance description 5
4. Remote control 8
5. Introduction 9
6. Get started 9
6.1 HDMI / VGA connection 9
6.2 Device power up 10
6.3 Starting the device 10
6.4 Configuring the Network 10
6.5 Function Introduction 10
7. Real-time display function introduction 11
7.1 Real-time display 11
7.2 Brushes 12
7.3 Eraser 14
7.4 Undo / Redo 14
7.5 Recording screens simultaneously 14
7.6 Photo Annotation Mode 15
7.7 Look back 15
7.8 Image Control 17
7.9 Resolution Frame Rate Setting 20
7.10 Manual focus 20
8. System Settings 21
8.1 Basic Settings 21
8.2 Display settings 22
8.3 Network Settings 23
8.4 System Settings 25
9. Interactive Sharing Interactive Sharing 26
9.1 Visualizer 26
3
1. Precautions
(1) The interactive display must be placed on a stable table before use to
prevent the product from falling to the ground to avoid damage.
(2) Please use this product in an environment with normal temperature
and humidity
(3) Keep away from water, fire and dusty environment.
(4) Do not place this product on other items.
(5) Please use the AC adapter that comes with the product to charge, other
chargers will cause damage to the product.
(6) When using, adjust the camera to a suitable angle and height.
(7) If you accidentally pour water or other liquids on the product, you
must immediately turn off the power and unplug the power. After drying,
restart the machine to check whether it is damaged.
(8) If cleaning is required, wipe with a soft dry cloth or cleaning paper.
2. Product declaration
(1) Please refer to the actual product, and the manual is for reference only.
(2) This product description may contain technical inaccuracies or
typographical errors.
(3) The products or programs described in this product description may be
improved or updated at any time without notice.
(4) Screenshots of this product manual are for display purposes only.
(5) If you have any questions or request the latest procedures and
supplementary documents, please contact the company's after-sales
service department.
4
3. Appearance Description
Front View ：
Rear View：
5
TOP VIEW：
LEFT VIEW ：
6
BOTTOM VIEW ：
7
4. Remote control
8
5. Introduction
The Visualizer is a multi-functional demonstration instrument, used for lectures, meetings,
product demonstrations, etc., can display paper documents, color pictures and three-dimensional
objects in real time, and can annotate, zoom in and out of displayed items on the display screen
interface. Touch operation, and can take high-definition pictures to save display objects; support
simultaneous recording screen recording, multimedia courseware; support interactive sharing
functions such as Miracast, DLNA, Visualizer.
6. Start using
6.1 HDMI / VGA connection
6.1.1 HDMI connection
Connect the HDMI input connect to teachers' computers ,HDMI output connect to LCD electronic
whiteboards, projectors and other devices. You can switch the screen of the teacher computer
interface and the interactive display instrument interface on the LCD electronic whiteboards and
9
other display terminals with a one-touch switch .
6.1.2 VGA connection
Connect the VGA input to the computer, and connect the VGA output to the projector, computer monitor
and other equipment. You can switch the screen of the computer interface and the interactive display
instrument interface on the display terminal by a one-key switch key.
☆Can choose HDMI connection or VGA connection according to need, VGA and HDMI can work at
the same time.
6.2 Power on the device
Connect the adapter that comes with the product to a 220V power supply and plug it into the power jack
of the interactive display. During power up, the power indicator turns green.
6.3 Starting the device
Press the power switch of the device (2s-3s), wait for the screen display of the interactive display
instrument to display the startup logo, and release the power button; when the screen display shows the
real-time display interface, the startup is completed.
6.4 Configure the network
To configure the network environment for the interactive display, click the real-time booth →HOME
button on the menu bar →System Settings →Network Settings (Configure the connection to the wired
network. When the wired connection setting interface displays the wired IP address, the configuration is
successful; configure the wireless network and set in the WLAN settings WIFI connected to the router.
When the wireless connection configuration interface displays the IP address, the configuration is
successful. For detailed operation instructions, please click ☛Network Settings.
6.5 Function Introduction
6.5.1 One-touch screen switching
Support one-button switching of interactive display and HDMI / VGA input and output screens.
6.5.2 LED Light Switch
Turning on the LED light can enhance the front light of the subject, enhance the use of light environment,
and increase the sharpness of the subject in low or no light environment.
Press the LED light switch once: turn on the LED light;
Press the LED light switch again: turn off the LED light.
6.5.3 Live Demo
It can quickly show the teacher's operation or experiment process and can annotate the real-time screen.
10
For detailed function introduction, please click ☛Real-time Demo Function Introduction.
6.5.4 Interactive Sharing
The PC can wirelessly remotely display the screen to the display terminal such as TV through the
interactive display instrument, and DLNA push to share video, pictures and other functions. For detailed
function introduction, please click ☛Interactive Sharing Interactive Sharing.
6.5.5 File Browser
☆The storage priority of the file is: SD card-> U disk-> internal storage
Supports the flexible creation of multi-level folders, which can copy, paste, cut, and delete files in the
local, SD card and U disk. For detailed function introduction, please click ☛File Browser.
6.5.6 Web Browser
Supports functions such as browsing the web and playing network videos. For detailed function
introduction, please click ☛Web Browser.
7. Real-time display function introduction
7.1 Real-time display
Place the books or documents to be displayed under the camera of the interactive display instrument, and
then display them in the real-time display interface. Dynamically display the real-time actions in the
preview window. You can use two-point zoom and mouse wheel to zoom the screen to show the details
image.
Double-click the touch screen in the real-time display interface to show or hide the menu bar (the menu
bar is automatically hidden for 3 minutes by
default).
7.2 Brush
Tabla de contenidos
