Raz Jaz-SP Manual de usuario
Mobile Shower
Commode Chairs
Jaz-SP
User and Dealer
Manual
RQD030r00ENG Rev. Date: 2019-07-24
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
2
SAFETY PRECAUTIONS
Failure to comply may cause injury or damage!
It is important that the Jaz Mobile Shower Commode Chair is properly assembled
and that all adjustments are made carefully. Please ensure that the user(s),
dealer(s) and attendants(s) have read this manual and thoroughly understood
the safe operation of the Jaz-SP. Up-to-date manuals are available online at
www.razdesigninc.com. For clarification of any section of this manual, please
contact your dealer or the manufacturer.
Raz Design Inc.
22 Howden Rd. Toronto, Canada M1R 3E4
1.416.751.5678 / 1.877.720.5678 (USA)
CHAIR CLASSIFICATION BASED ON MAXIMUM USER WEIGHT
Jaz-SP
150 kg (330 lbs)
SAFETY WARNINGS TO CONSIDER FOR RETAIL PURPOSES
THIS DEVICE IS SUITABLE FOR TYPE A; HIGH USAGE (e.g. INSTITUTIONS) AND SHOULD
NEVER BE USED FOR ANY PURPOSE OTHER THAN ORIGINALLY INTENDED
Forward Stability
The casters on all models are equipped with dual locks. The step-on lever
activates both the roll lock and the swivel lock. It is essential that all
casters on the shower chair be in an outward position before
engaging the locks, for optimal forward, rearward and lateral stability.
USERS MUST NOT lean forward while sitting in the Jaz-SP as this may
cause the chair to tip forward.
USERS MUST NOT wheel up or down a ramp without an attendant who
can hold onto the Jaz-SP during the ascent or descent.
CASTER LOCKS AND WHEEL LOCKS ARE NOT BRAKES! Never use
the caster locks or wheel locks to slow down the Jaz-SP when
descending inclines as this could cause the chair to tip in the
direction of travel.
Lateral Stability
USERS MUST NOT lean over the edge of the Jaz-SP as this could cause
the chair to tip.
USERS MUST NOT attempt to pick up objects from the floor by leaning
over and reaching –a reacher or grabber tool should be used, or seek
assistance from an attendant.
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
3
USERS MUST NOT position the Jaz-SP on a side slope as this could
cause the chair to tip.
Rearward Stability
USERS MUST NOT wheel up an incline on the Jaz-SP without ensuring
that the rear anti-tippers are in place. The anti-tippers must be properly
installed before wheeling on uneven surfaces.
Ramps and Other Inclines
Ramps or other surfaces that are not level (such as slopes into wheel-in
showers) must be tested with an attendant to ensure the stability of the
chair is not compromised. A qualified healthcare professional should be
consulted to assist with this process.
DO NOT push or pull the Jaz up or down an incline or ramp that
exceeds a 1:12 grade (5° slope).
DO NOT allow any user to be propelled (pushed or pulled) in the Jaz-SP in
any other manner than by an attendant.
Immersion
The Jaz-SP is not designed to be used as a pool chair. Do not immerse the shower chair in whole or in part, in
water or any other liquid. Damage to the shower chair components may result.
Transfers
The most dangerous part of using any shower chair is the transfer. Since every chair has different stability
characteristics, it is essential to carefully review and test the transfer technique to ensure that the procedure is
safe. Test transfers should be performed with an attendant who can prevent the chair from tipping or moving
during the transfer. If you feel that the transfers cannot be repeatedly performed safely, contact a healthcare
professional who is familiar with transfer techniques and options. Individuals who have not learned safe
transfer skills must seeks assistance during transfers and may require the use of a mechanical lift.
Transferring onto the Jaz-SP Shower Commode Chair
ALWAYS lock the two front casters in the outward position and engage both rear wheel locks for maximum
chair stability.
Transfers should never be attempted with the shower chair positioned on slippery surfaces. It is
recommended that transfers be performed on clean, dry, non-slippery surfaces. Hard surface flooring such as
tile, wood or concrete may not provide sufficient grip to keep locked casters and/or rear wheels from sliding. A
fully-carpeted surface is optimal. Be aware that area rugs and shower mats can slide on floors and thereby
present a hazardous surface.
DO NOT stand on any part of the frame of the Jaz-SP.
NEVER use the footplates to assist in transfers. This could cause the
chair to tip. The footrests should be swung to the side or removed
entirely during transfers to provide unobstructed access to the Jaz-SP.
The Jaz-SP is NOT intended for use as a transportation device or a
long-term seating system.
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
4
IMPORTANT !
USERS SHOULD NEVER BE LEFT UNATTENDED IN THE JAZ-SP
IMPORTANT !
DO NOT LIFT THE JAZ-SP AND OCCUPANT BY THE ARMRESTS OR FOOTRESTS!
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
5
Table of Contents
1.0 GENERAL INFORMATION........................................................................................................6
1.1 Jaz-SP Overview.....................................................................................................................6
1.2 Jaz-SP Specifications..............................................................................................................6
2.0 CHAIR SET-UP: INTENDED FOR DEALER, DISTRIBUTOR OR QUALIFIED
WHEELCHAIR/SERVICE TECHNICIAN....................................................................................7
3.0 ACCESSORIES INSTALLATION: INTENDED FOR DEALER, DISTRIBUTOR OR
QUALIFIED WHEELCHAIR/SERVICE TECHNICIAN..............................................................12
3.1 Pelvic Strap Installation.........................................................................................................12
3.2 Chest Strap Installation.........................................................................................................12
3.3 Lateral Support Installation....................................................................................................13
3.4 Armrest Lock Installation.......................................................................................................14
3.5 Headrest Installation .............................................................................................................14
3.6 Quick-Release Axle Installation.............................................................................................15
4.0 USE AND OPERATION ...........................................................................................................16
4.1 Standard / Locking Armrest...................................................................................................16
4.2 Adjustable Footrests .............................................................................................................16
4.3 Commode Pan......................................................................................................................16
4.4 Casters..................................................................................................................................16
5.0 CLEANING AND MAINTENANCE........................................................................................... 17
5.1 Cleaning After Each Use.......................................................................................................17
5.1.1 Commode Pan..................................................................................................................17
5.1.2 Soft Jaz Seat (if ordered)..................................................................................................17
5.2 Cleaning As Needed .............................................................................................................17
5.2.1 Frame, Armrests, Adjustable Footrests, and Other Components .....................................17
5.3 Suggested Cleaning Products...............................................................................................17
6.0 LIMITED WARRANTY.............................................................................................................. 18
7.0 CONTACTS..............................................................................................................................19
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
6
1.0 GENERAL INFORMATION
1.1 Jaz-SP Overview
1.2 Jaz-SP Specifications
SPECIFICATIONS
Jaz-SP
WEIGHT CAPACITY
150 kg (330 lbs)
SEAT WIDTH
48 cm (19”)
SEAT DEPTH
43 cm (17”)
BACK WIDTH
46 cm (18”)
BACK HEIGHT
43 cm (17”)
TOILET HEIGHT CLEARANCE
39-51 cm (15.4-20.4”)
TOILET WIDTH CLEARANCE
39 cm (15.4”)
ARMREST HEIGHT ABOVE SEAT
20 cm (8”)
SEAT-TO-FLOOR HEIGHT
48-61 cm (19”-24”)
OVERALL WIDTH
66 cm (26”)
MINIMUM TURNING CIRCLE
108 cm (42.5”)
PRODUCT WEIGHT
22 kg (48 lbs)
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
7
2.0 CHAIR SET-UP: INTENDED FOR DEALER, DISTRIBUTOR OR QUALIFIED
WHEELCHAIR/SERVICE TECHNICIAN
Tools Required: #2 Phillips screwdriver, 4mm hex key, 5mm hex key, 10mm wrench, 13mm wrench,
¾” wrench, ¾” socket wrench
1. Align the base cross member onto the base side.
Note the orientation of the long edge on the base cross member and ensure all 3 bosses of the
base cross member are seated within the holes on the base side.
2. Secure the base side and base cross member with three
M6x40mm button head screws with flat washers and hinged
caps.
3. Close the hinged caps.
4. Repeat steps 1-3 for the other side.
a)
b)
c)
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
8
5. Insert the anti-tip tube through the bottom of
the base side.
6. Insert the M8x50mm button head screw
through the base side and anti-tip tube.
Secure with lock nut.
7. Repeat steps 5-6 for the other side.
a)
b)
8. Insert the two M6x55mm button head
screws with flat washers into the wheel lock
plate and base side in the forward position.
Secure with lock nuts.
Wheel lock adjustment shown in step 12.
9. Remove the hub cap on the wheel by prying.
10.Insert the ½” axle bolt through the axle
receiver and wheel. Secure with lock nut
and cover with hub cap. Do not overtighten,
ensure the wheel can spin freely.
Refer to section 3.6 if quick-release axles are ordered.
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
9
11. Repeat steps 8-10 for the other side.
a)
b)
c)
12. The wheel lock plate can be rotated
backwards within the slot to increase the
amount of wheel engagement.
With the wheel locks engaged, the wheels
should remain stationary unless a
significant turning force is applied to the
wheel.
13. Set the commode pan brackets onto the
bottom of the seat. Ensure the commode pan
brackets are in the correct orientation.
14. Attach the commode pan using four
#10x3/4” self-tapping screws.
15. Connect the backrest to seat. Apply
downward force such that the bottom surface
of the backrest makes contact with the top
surface of the seat.
16. Slide the nut drawers into the backrest slots
in the appropriate orientation.
Jaz-SP User and Dealer Manual
RQD030r00ENG Rev. Date: 2019-07-24
10
17. Insert the two M6x80mm button head screws
with flat washers into holes on the underside
of the seat. Tighten the screws into the nut
drawers to secure the backrest to seat.
18. Repeat steps 16-17 for the other side.
a)
b)
19. Set the seat and back assembly onto the
base frame. Ensure all four legs of the seat
are aligned with the four slotted holes in the
base.
20. Select and set to the desired seat-to-floor
height.
21. Insert the height adjust clips through all 4 legs
of the base and seat.
22. Place the footrest hanger tubes into the
footrest receiver holes on the base frame.
Tabla de contenidos
Otros manuales de Silla de ruedas de Raz
