Raytec Raymax 25 PoE series Manual de usuario
Installation Steps
1. Mount Illuminator
2. Connect Power
Set Up Steps
1. Optional night set-up for optimum
image performance
2. Adjust vertical angle
3. Tighten all fixings
Package Contents
1. Illuminator with Integrated PSU
illuminators installation guide
MAX 25 PoE
This installation guide provides instructions for installing the RAYMAX 25 PoE
series illuminators.
Version 6.0
Overview
RAYMAX 25 PoE illuminator
Integrated PSU
(back of illuminator)
2
!
Install in a well
ventilated area
Specifications subject to change without notice. Installation to be carried out by suitable trained and qualified personnel.
LED illuminator
Standard U Bracket
Do not continually
stare at lamp
1.5m
Install
internally only
PoE
Power
adjust
P-cell
adjust
Power On
Power Indicator
Telemetry Control
- telemetry input
requires zero volt
latched input, non
polarity sensitive
PoE Input 12V DC
24V AC/DC (Optional input
instead of PoE)
3
Installation
1
Mount illuminator
Connect Power
2
1
2
Set Up
1Optional night set-up
for optimum image
performance
TARGET
Tighten all fixings
2 3
Adjust vertical angle
Match illumination to camera field of view
Camera
Light
Light
x x Light
Camera
Reduces performance May cause hot spots Best performance
Camera
INTERNAL USE ONLY
!
Use wall bracket if you require horizontal adjustment.
4
Technical Drawings (Not to scale)
Optional Bracketry
Wall Mount
Standard Bracketry
RM 25 PoE
Specifications
INFRA-RED Series
Input Output PoE Photocell Adjustable
Power Weight Dimensions
L x W x D
PoE or
12V DC
24AC/DC
12W
IEEE802.3af
Compliant Interface
Power classification
(class 0)
CAT5 Cable
Integrated
(adjustable
sensitivity)
10% - 100% 0.8kg
(1.8lbs)
75 x 100 x 54mm
3” x 4” x 2”
(approx)
Command and Control
Integrated Power Supply Features
• Adjustable photocell
• Adjustable power
• Telemetry input
8.5mm
(0.3”)
25mm
(1”)
23.5mm
(0.9”)
47mm
(1.9”)
48mm
(1.9”)
5
Trouble Shooting
Step 1: Basics
Check blue LED ‘power on’ light is illuminated on the back of the PoE unit.
If Yes,
• Ensure power adjust is turned to the maximum level.
• Ensure Photocell is covered and if necessary adjust the photocell
sensitivity.
If No,
• Confirm that the PoE injector unit is fully functioning.
NB: Refer to manufacturer’s guide
• Check that the cable is fully intact, and not broken or split.
Step 2: Set-up Camera, lens and illumination
Check alignment of lamp
Check camera lens – fully open at night & set correctly.
Check model number to Raytec performance specification to ensure
required distance is achievable.
Step 3: Call Raytec for further assistance
Note down:
• Model and serial number of illuminator
• Camera make and model
• Lens make and model
If the Raytec lamp is still not delivering the required performance, please
contact us for further assistance: tel +44 (0)1670 520055
UK / Europe
T: +44 (0) 1670 520055
F: +44 (0) 1670 819760
sales@rayteccctv.com
Americas (Toll Free)
T: +1 888 505 8335
ussales@rayteccctv.com
www.rayteccctv.com
PoE/13/6.1
Tabla de contenidos
Otros manuales de Foco de Raytec
Raytec
Raytec SPARTAN SPX-HP15K Manual de usuario
Raytec
Raytec WARRIOR 24 Manual de usuario
Raytec
Raytec Spartan Series Manual de usuario
Raytec
Raytec Spartan Series Manual de usuario
Raytec
Raytec VARIO2 series Manual de usuario
Raytec
Raytec SPARTAN MP Series Manual de usuario
Raytec
Raytec Spartan Series Manual de usuario
Raytec
Raytec SPARTAN SPX Series Manual de usuario
