Raven SmarTrax Manual de usuario

Case IH 4300 SmarTrax Supplement

& Installation Manual

P/N 016-0190-072 Rev B 09/15

DISCLAIMER

While every effort has been made to ensure the accuracy of this document, Raven

Industries assumes no responsibility for omissions and errors. Neither is any liability

assumed for damages resulting from the use of information contained herein.

Raven Industries shall not be held responsible or liable for the effects of atmospheric

conditions and sunspot activity on the performance of our products.

Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of

the GPS signal from the US Department of Defense/NAVSTAR GPS satellites, the

OmniSTAR correction service or the WAAS correction service.

Raven Industries accepts no responsibility for the use of the signal for other than the

stated purpose. Raven Industries shall not be responsible or liable for incidental or

consequential damages or a loss of anticipated benefits or profits, work stoppage or

loss or impairment of data arising out of the use or inability to use the Smartrax or any

of its components.

Manual # 016-0190-072

CHAPTER

NTRODUCTION

Congratulations on your purchase of the Raven SmarTrax system! This

system is designed to provide cutting-edge, hands-free steering of your

machine via GPS coordinates.

CaseIH 4300 SmarTrax Supplement & Installation Manual

Basic Kit

Contents

Below you will see the kit contents that you should have received with this

SmarTrax kit.

CaseIH 4300 SmarTrax Kit Contents

Quantity Item Description Part Number

1 Sensor, Yaw 063-0172-684

1 Cable, Hydraulic Solenoid/Override 115-0171-466

1 Weldment, Bracket, Universal Hydraulic Mounting 116-0159-527

1 Kit, Hyd., SmarTrax, CIH 4300 Floater, ‘97 & Earlier 117-0194-072

1 Valve, Flow Control, 1/4” NPTF, w/Fittings 334-0001-053

1 Valve, Hyd., MM, Dual Counterbalance, w/FTGS 334-0003-026

1 Switch, Press., Micro, HD, 15-100 BAR ADJ., w/

Fitting 422-0000-073

4 Bolt, 5/10-18 x 7/8” Hex 311-0052-104

2 Bolt, Machine, 5/16-18 UNC x 3” LONG 311-0052-113

2 Nut, Hex, 5/16-18 UNC 312-1001-034

4 Nut, 3/8-16 312-1001-037

6 Washer, 5/16 Lock, Split 313-1000-022

2 Washer, .312 I.D. x .734 O.D. 313-2300-011

4 Washer, Flat, 3/8” 313-2300-013

1 Valve, Hyd., Open Center, PWM 334-0003-064

1 Manual, Installation 016-0190-072

1 Manual, Installation, SmarTrax 016-9001-012

1 Label, Warning, Do Not Step 041-0159-688

1 Label, Warning, Tampering 041-0159-689

1 FTG., Adapter, Swivel Run Tee, -8 JIC M/M/F 333-0012-039

1 FTG., Elbow, 45° Swivel, -8 JIC M/F 333-0012-040

5 FTG., Elbow, 90° Swivel, -6 JIC M/F 333-0012-042

4 FTG., Adapter, Swivel Run Tee, -6 JIC M/M/F 333-0012-043

1 FTG., Elbow, 90° Swivel, -8 JIC M/F 333-0012-064

2 FTG., Adapter, STR., -6 JIC (F) To -8 JIC (M) 333-0012-118

2 Hose, Hyd., -8 JIC (F) to -6 JIC (F), 24” 214-1000-171

1 Hose, Hyd., -8 JIC (F) to -8 JIC (F), 18” 214-1000-250

1 Hose, Hyd., -8 JIC (F) 90° to -6 JIC (F), 18” 214-1000-428

3 Hose, Hyd., -6 JIC (F) 90° to -6 JIC (F), 12” 214-1000-429

Manual # 016-0190-072

CHAPTER

AFETY

Hydraulic

Safety

Precautions

When disconnecting the hydraulic hoses or when purging is required, be

aware that the hydraulic oil within the machine system may be extremely

hot and under high pressure. Caution must be exercised. Any work carried

out on the hydraulic system must be performed in accordance with the

machine manufacturer’s approved maintenance instructions. Raven

Industries recommends that appropriate protective equipment be worn

when working on the hydraulic system.

Objects or materials that are able to bypass the machine’s hydraulic

filtration system will adversely reduce performance and possibly damage

the hydraulic valves.

Electrical Safety

Precautions

Do not reverse the power leads. Doing so will cause severe damage to the

equipment. Always check to make sure that the power leads are connected

to the right polarity as marked. Ensure that the power cable is the last cable

to be connected.

Important: Hydraulics are under pressure. Never attempt

to open or work on a hydraulic system with the equipment

running. Care should always be taken when first opening

a system that was previously pressurized.

CaseIH 4300 SmarTrax Supplement & Installation Manual

Contacting

Raven

Industries

We welcome your feedback about this manual. If you have any comments

or suggestions for improvement, please let us know by contacting our

Customer Support Center by any of the following methods:

•Via phone: 1-800-243-5435

•Via mail:

Raven Industries

Flow Control Division

205 E. 6th St.

Sioux Falls, SD 57104

•Via email: [email protected]

Manual # 016-0190-072

CHAPTER

OUNTING

THE

NIVERSAL

RACKET

AND

YDRAULIC

ALVE

1. Position the hydraulic valve on the universal bracket, over the top of

the proper hole pattern. Secure the valve to the bracket using the

supplied bolts and washers.

2. Mount the smaller counterbalance valve to the bracket. Two mounting

holes and clearance holes/slots will have to be drilled to mount the

valves as shown. The valve can be moved up on the bracket to allow

the fittings to hang over the edge of the valve.

CaseIH 4300 SmarTrax Supplement & Installation Manual

3. Position the bracket on the front of the cab, under the hood.

4. Drill holes to fit the mounting bracket pattern and attach the universal

mounting bracket to the machine using the supplied 3/8” hex bolts.

Manual # 016-0190-072

CHAPTER

YDRAULICS

Mounting the

Counterbalance

Valve, Pressure

Switch, and

Needle Valve

1. Connect the pressure switch with the tee fitting to the brake port of the

counterbalance valve.

2. Attach the needle valve to the open port of the tee of the pressure

switch.

CaseIH 4300 SmarTrax Supplement & Installation Manual

3. Locate and label the ports on the steering orbital as shown below.

Otros manuales para SmarTrax

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Raven

Raven

Raven SBGuidance Auto Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven RS1 Manual de usuario

Raven

Raven AutoBoom PowerGlide Plus Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven RCM-Sprayer Hawkeye 2 Manual de usuario

Raven

Raven Sidekick Pro Manual de usuario

Raven

Raven RS1 HDU Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven AIM Command FLEX Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven AutoBoom Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven Spray Air 2010 Predator Manual de usuario

Raven

Raven Case IH Patriot 3XX0 Manual de usuario

Raven

Raven SC1 Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven SmarTrax Manual de usuario

Raven

Raven RS1 Manual de uso y cuidado

Raven

Raven SmarTrax Manual de uso y cuidado

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario

TURF TANK

TURF TANK One+ Manual de usuario