Ravas PR-INT-MX-RAVAS-ABLE Manual de usuario
Printer manual
* If your printer is not shown in this picture diagram, please contact your supplier.
We would like to inform you about the fact that this RAVAS product is 100 % recyclable on the basis that the parts
are processed and disposed off in the right manner.
More information can be found on our website www.ravas.com.
Rev.20150617
Printing/typographical errors and model changes reserved
Page 2of 26
Printer manual
PRINTER Page
PR-INT-MX-RAVAS-ABLE 4
Picture 4
Paper change 4
Inkt ribbon change 5
paper rolls 5
PR-INT-TH-RAVAS-MPP8250 6
Picture 6
Paper change 6
paper rolls 7
PR-INT-TH-XTRA 8
Picture 8
Paper change 8
paper rolls 9
PR-EXT-TH-RAVAS-7810V 10
Picture 10
Paper change 10
paper rolls 10
PR-EXT-MX-MCPK6701 11
Picture 11
Paper change 11
Inkt ribbon change 12
paper rolls 13
PR-STAR 14
Picture 14
Paper change 14
Inkt ribbon change 15
paper rolls 16
PR-STAR-PIN 17
Picture 17
Paper change 17
Inkt ribbon change 18
paper rolls 19
PR-TM-295 20
Picture 20
Paper loading 20
Inkt ribbon change 22
Paper 23
Page 3of 26
Printer manual
PR-ZEBRA-GK420D
Picture
Paper change
paper rolls
PR-EXT-TH-BLT-3”
Picture
Paper change
paper rolls
Page 4of 26
Printer manual
PR-INT-MX-RAVAS-ABLE
Picture
Paper change
Drawing 1
Drawing 2
Turn off the weighing system.
In order to open, move the left key (see drawing 1) to the right. At the same time pull the printer
door towards you.
Remove the empty paper roll from the holder.
Place a new paper roll on the holder. Pay attention to the correct placing of the roll in regard to
the unwinding side of the paper (see drawing 2 for the correct installation).
Feed the paper in the printer head (see drawing 2 for the correct installation).
Upon feeding the paper a light resistance is felt.
Turn on the weighing system.
By pressing the print feed key, the paper is transported further into the printer head (the print
feed key is located on the inside of the printer housing; at the top on the right a messing strip
with a little catch. This is the extension of the printer feed key).
The paper appears at the front of the printer head.
Page 5of 26
Printer manual
Close the printer door (push until you hear a click).
The weighing system and printer are ready for use.
Inkt ribbon change
Open the printer as shown above.
Take hold of the printer door between thumb and index finger and push the inner chassis slightly
downwards with your middle finger.
With your other hand carefully pull the inner chassis loose from the outer chassis (see drawing 3).
Hinge both parts as far apart from each other as possible and remove the ink ribbon by pushing on
one side (mentioning PUSH) of the ink ribbon cassette.
The ink ribbon pops out and can be changed (see drawing 4).
drawing 3 drawing 4 Picture inkt ribbon
Paper rolls
Order nr.:
Description:
Dimensions:
PRP-PAP-RAVAS-57-50-12
paper, single, white
57xØ50xØ12 mm.
PRP-PAP-RAVAS-57-50-12-DOUBLE
paper, double, white/yellow
57xØ50xØ12 mm.
Page 6of 26
Printer manual
PR-INT-TH-RAVAS-MPP8250
Picture
Paper change
Drawing 1
Drawing 2
In order to open, pull the lever until the lid is released from its locked position. To avoid damage,
do not use eccesive force. See drawing 1 and 2.
Page 7of 26
Printer manual
Remove the empty paper roll from the holder.
For replacing a new paper roll, reel off a few centimeters from the new paper roll. Hold
approximately 5 cm. of paper outside the device as you place the new roll into the reservoir.
Close the lid by applying equal amounts of pressure on each side ensuring the lid is in locked
position.
Tear off the spare paper.
Paper rolls
Order nr.:
Description:
Dimensions:
PRP-PAP-INT-TH-RAVAS
Thermal paper, white
57xØ50xØ18 mm.
PRP-PAP-CU-ST-TH-RAVAS
Thermal, self adhesive, white
57xØ50xØ12 mm.
Page 8of 26
Printer manual
PR-INT-TH-XTRA
Picture
Paper change
Picture 1
Picture 2
Page 9of 26
Printer manual
Picture 3
Picture 4
In order to open, pull the lever until the lid is released from its locked position. To avoid damage,
do not use eccesive force. See picture 1.
Remove the empty paper roll from the holder. See picture 2.
For replacing a new paper roll, reel off a few centimeters from the new paper roll. Hold
approximately 5 cm. of paper outside the device as you place the new roll into the reservoir. See
picture 3.
Close the lid by applying equal amounts of pressure on each side ensuring the lid is in locked
position. See picture 4.
Tear off the spare paper.
Paper rolls
Order nr.:
Description:
Dimensions:
PRP-PAP-TH-RAVAS-58-32-12
Thermal paper, white
58xØ32xØ12 mm.
Page 10 of 26
Printer manual
PR-EXT-TH-RAVAS-7810V
Picture
Paper change
In order to open, pull the lever until the lid is released from its locked position. To avoid damage,
do not use eccesive force.
Remove the empty paper roll from the holder.
For replacing a new paper roll, reel off a few centimeters from the new paper roll. Hold
approximately 5 cm. of paper outside the device as you place the new roll into the reservoir.
Close the lid by applying equal amounts of pressure on each side ensuring the lid is in locked
position.
Tear off the spare paper.
Paper rolls
Order nr.:
Description:
Dimensions:
PRP-PAP-INT-TH-RAVAS
Thermal paper, white
57xØ50xØ18 mm.
PRP-PAP-CU-ST-TH-RAVAS
Thermal, self adhesive, white
57xØ50xØ12 mm.
Este manual sirve para los siguientes modelos
9
Tabla de contenidos
