Ratoc Systems PCIU2 Manual de usuario

PCIU2

User’s Manual

June 2001

Rev.1.0

USB2.0 PCI Host Board

Contents

1. Introduction........................................................................... 3

1-1. Features.......................................................................................................3

1-2. Restrictions .................................................................................................3

1-3. Required Operating Systems ....................................................................3

1-4. Other Requirements...................................................................................3

2. Before installing... ................................................................. 4

2-1. Package .......................................................................................................4

2-2. Using Low-Profile Bracket .......................................................................4

3. Setting up............................................................................... 5

3-1. Installing the PCI board ............................................................................5

3-2. Installing the driver(Windows 98SE).......................................................6

3-3. Installing the driver(Windows 2000) .....................................................11

3-4. Installing the driver(Windows Me) ........................................................14

4. Registration and Tech-support .......................................... 16

4-1. How to Register........................................................................................16

4-2. Software Update and Support ................................................................16

5. Options................................................................................. 17

6. Specifications....................................................................... 18

Appendix.................................................................................. 19

•Supports480Mbps(High-speed), 12Mbps(Full-speed), 1.5Mbps(Low-speed)data transfer mode.

ThisUSB2.0 hostadapter isfully backwards compatible withthe currrentUSB1.1 devices.

•Certifiedand passed USBHI-SPEED Compliancetest.

•IncludesouroriginalUSB2.0 EHCIdriver.

Supports Windows 98SE, Windows Me, Windows 2000.

•500mAmax. per portavailable.

•Includes Low-ProfilePCI bracket. Youcan use thisPCIU2 PCI boardwith a Low-ProfilePC.

•You can’tconnect aUSB2.0 device viaa USB2.0 HUB.

•Thedriverdoesn’t supportIsochrounous transfermode.

•Whenyouremove aUSB deviceand connectit again,you haveto waitfor over3 secondsbefore you

connectit again.

•Youcan’tremove/connecta USBdevicewhen PCis inthefollowing status:

Instandby mode, gettingready forstandy mode,resuming fromstandbymode.

Inhybernationmode, gettingreadyforhybernation mode,resumingfromhybernation mode.

•This driverdoesn’t support remotewake upfrom a USBdevice.

•Otherrestrictionsare writteninthe readme.txtfile.

1-3. Required Operating Systems

•Windows 98SE(Second Edition)

•Windows 2000

•WindowsMe(MillenniumEdition)

1-4. Other Requirements

•AvailablePCIslot

ThisUser’s Guidedescribes howto install theRATOCUSB2.0PCI HostAdapter Board.

(calledPCIU2in thisUser’sGuide).

TheinformationintheREADME.TXTfileontheCD-ROM mayincludethelatestinformation.

Besure toread thefile aswell.

1. Introduction

1-2. Restrictions

1-1. Features

2. Before installing...

2-1. Package

Check the packagecontents:

•PCIU2 PCI Board

•Low profile bracket

•Software CD-ROM

•User’s manual

NOTE

Ifanyof these items are missingfromthePCIU2retail package, contact yoursupplier

immediately.

2-2. Using Low-Profile Bracket

Ifyou usethe PCIU2 witha Low-Profile PC,you haveto replace thebracket withthe bundled

Low-Profilebracket as shownbelow.

Afterinstallingit, startyourPC. Then,youneed toinstall thedriverfor thePCIU2.

A)When you use Windows 98SE----------- Proceed to Chapter 3-2.

B)When you use Windows 2000------------Proceed to Chapter 3-3.

C)When you use Windows Me--------------Proceed to Chapter 3-4.

Turnoffyour computerandinstall thePCIU2 intoaPCI slot.

Pleasenotethefollowing:

1.YouhavetoinstallthePCIU2firmly.IfthePCIU2isn’tinstalledfirmly,thisproductor

your PC may get damaged.

2.Besure thegold contact ofthe PCIboard iscompletely in awhite PCIslot.

3.Besure to fasten thebracket of the PCIboard with ascrew as shown below.

3. Setting up

3-1. Installing the PCI board

3-2. Installing the driver(Windows 98SE)

Whenyouuse Windows 98SE,followthe stepstoinstall thedriver.

1. When youstartyourPCafter installingthePCIU2,thefollowing HardwareWizard will

appear. Insert the PCIU2 CD-ROM into the CD-ROM drive and click [Next].

2. Select [Searchforthe bestdriverfor your device.(Recommended)]and click [Next].

3. Click [Next]. Uncheck allthe options.

4. Select [Theupdateddriver(Recommended)NEC USBOpen HostController]and click

[Next].

5. Click [Next].

6. Click[Finish].

7. Thesame hardwarewizardas shownatthe step 1through6 willappearagain.

Follow the same procedure.

10. Select [Specifya location]andtype in [D:\PCIU2]and click [Next].

(D means your CD-ROM drive letter. If your CD-ROM is “E”, you have to type in

[E:\PCIU2].)

8. Then,thefollowinghardwarewizardwillappear.

9. Select [Searchforthe bestdriverfor your device.(Recommended)]and click [Next].

11. Make sure Windowsfound thePCIEHCI.INF filein thePCIU2 folderin theCD-ROM drive.

Then,click [Next].

12. Click[Finish].

13. Restart your PC.

You have now finished installing the driver.

14. Toverifythatthe driveris installed correctly,right-clickon [MyComputer],select[System

Properties], and then select the [DeviceManager] tab.

If you can find two [NEC USB Open Host Controller] strings and a [RATOC PCI USB

EnhancedHost Controller]string under the[UniversalSerialBusControllers],the

driverisinstalledcorrectly.

Tabla de contenidos

Otros manuales de Tarjeta PCI de Ratoc Systems

Ratoc Systems

Ratoc Systems PCIFW1U Manual de usuario

Ratoc Systems

Ratoc Systems WLTL19105.1 Manual de usuario

Ratoc Systems

Ratoc Systems 16Bit PC Card Adapter PCI Board REX-PCICA1 Manual de usuario

Ratoc Systems

Ratoc Systems IEEE 1394 PCI Board REX-PFW2WDV Manual de usuario

Ratoc Systems

Ratoc Systems USB2.0 PCI Host Board REX-PCIU2 Manual de usuario

Ratoc Systems

Ratoc Systems PE51EX Manual de usuario

Ratoc Systems

Ratoc Systems EX30S Manual de usuario

Ratoc Systems

Ratoc Systems CB31Pismo Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario