Ransomes Matador 71 Manual de usuario

Ransomes Jacobsen Limited reserves the right to make design changes without obligation to make these

changes on units previously sold and the information contained in this manual is subject to change without notice.

Parts Manual

Ransomes Matador 71

71 Matador

Product Code: LDDD704

Series: EH4

WARNING

WARNING: If incorrectly used this machine can cause severe

injury. Those who use and maintain this machine should be

trained in its proper use, warned of its dangers and should

read the entire manual before attempting to set up, operate,

adjust or service the machine.

25068G (rev 1)

RJL 100 May 2014

Ransomes Jacobsen Limited reserves the right to make design changes without obligation to make these

changes on units previously sold and the information contained in this manual is subject to change without notice.

Parts- 1

1 ENGINE GROUP.....................................................8

2 MAINFRAME AND GRASSBOX ...........................10

3 THROTTLE LINKAGE............................................12

4 CUTTING UNIT .....................................................14

5 LANDROLL CLUTCH ............................................16

6 CONTROLS AND HANDLES ................................18

7 BRAKES ROLLER AND SCRAPER ......................20

8 FRONT ROLLERS .................................................22

9 LANDROLL.............................................................24

10 71CM ROLLERS ..................................................26

11 TRAILING SEAT ..................................................28

11A LANDROLL - RUBBER COVERED ..................30

12 DECALS ..............................................................32

SECTION PAGE SECTION PAGE

TABLE OF CONTENTS

en-2

2 INTRODUCTION

2.1 IMPORTANT__________________________________________________________

The Ransomes MATADOR is a Petrol engined Pedestrian REEL mower. The traction drive and the cutting unit

are Chain Driven.

IMPORTANT: Do the maintenance indicated in this manual to make sure that the quality of cut is kept at a high

level.

This SAFETY AND OPERATORS MANUAL is part of the machine and must stay with the machine always.

Suppliers of both original and used machines need to keep the documentation that comes with the machine.

You must use the machine to cut the grass only and not for any other purpose. Compliance with the conditions of

operation, service and repair specified by the manufacturer, are understood to be part of the correct use.

ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and

maintenance procedures.

Make sure that you obey all safety and road traffic regulations.

You must not make any changes to the machine that the manufacturer does not approve. This type of change

can release the manufacturer from the liability for any damage or injury.

Discard worn parts, taking note of the environmental result, use the systems available in the country where the

machine is used. When the machine is at its end of life, there are guidelines in this manual for the removal of the

machine from use.

Use only Ransomes Jacobsen Genuine spare parts to make sure that European conformity is controlled.

2006/42/EC

These instructions are the Original instructions confirmed by Ransomes Jacobsen Limited

en-3

INTRODUCTION 2

2.2 PRODUCT IDENTIFICATION___________________________________________

A Maximum front axle load in Kg (for machines being

driven on the highway)

B Gross weight (mass) in Kg

C Maximum rear axle load in Kg (for machines being

driven on the highway)

D Power in Kw

E Date code

F Machine type (Designation)

G Product code

H Product name

J Serial number

Location of Serial number plate

The serial number plate (A) is found on the chassis side plate.

Location of Engine Serial number plate

The engine serial number is found on the engine next to the Oil level

dipstick.

Kg Kw

Kg Kg

West Road

Ransomes Europark

Ipswich IP3 9TT

England

ABCD E

Kg Kw

Kg Kg

WestRoad

RansomesEuropark

IpswichIP39TT

England

100

XXXX-XXXX_XXXX

en-4

2 INTRODUCTION

2.3UIDELINES FOR THE DISPOSAL OF SCRAP PRODUCTS ______________________

2.3.1 DURING SERVICE LIFE _______________________________________________

Used oil, oil filters and engine coolant are hazardous materials. Recommended procedures must be followed for their

safe removal.

If a fluid leaks, contain the spill to make sure that the leak does not flow into the ground or drainage system. Follow the

local laws to make sure that leaks are controlled safely.

The maintenance procedures in this manual make sure that the damage that the machine can cause in the local

environment is controlled safely.

When the machine completes its full service life, the following actions must be taken.

2.3.2 END OF SERVICE LIFE _______________________________________________

These guidelines must be used with applicable Health, Safety and Environmental laws. Always use the approved local

waste disposal and agencies for recycled materials.

• Park the machine in a location to use all of the necessary lifting equipment.

• Use correct tools and Personal Protective Equipment (PPE) and take instruction from the technical

manuals applicable to the machine.

• Remove and store correctly

1. Batteries

2. Fuel

3. Engine coolant

4. Oils

• Disassemble the structure of the machine and refer to the technical manuals where applicable. Give

attention to parts that have mechanical pressure or tension applied to the part in the machine, including

springs.

• Items that continue to have a service life must be separated and returned to the local store.

• Items that are worn must be separated into the material groups and removed according to the agencies

for recycled materials that are available. Common types are as follows:

• Steel

• Non ferrous metals

• Aluminium

• Brass

• Copper

• Plastic materials

• Identified

• Can be recycled

• Can not be recycled

• Not identified

• Rubber

• Electrical and Electronic Components

• If an item is not easily separated into different material groups, the material must be added to the

“General discarded materials” area.

• Do not burn discarded materials.

Change the machinery records to show that the machine is not in service and is discarded. Supply this serial number to

Ransomes Jacobsen Warranty Department to close their records.

en-5

INTRODUCTION 2

2.4 PARTS MANUAL ______________________________________________________

In compliance with the ISO14001 standard, Ransomes Jacobsen Limited does not send a paper parts manual

with every product.

To refer to a parts list for this mower you have four options:

1. Website – www.ransomesRansomes Jacobsen.com. Select the “GENUINE PARTS” tab followed by

the “ONLINE PARTS LOOK-UP” tab. You now have access to Parts drawings and lists to help with the

identification of spare parts.

2. Website – www.ransomesRansomes Jacobsen.com. Select the “SUPPORT” tab. You now have access

to a PDF version of the parts manual.

3. Complete the form included in the technical manual pack supplied with the machine for one of the two

options below

a. A disc that contains an electronic copy of the Parts Book.

b. A paper copy of the parts manual.

2.5 KEY NUMBERS _______________________________________________________

Record the key numbers shown below:

Starter Switch:-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Diesel tank:-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Record the machine and engine numbers shown below:

The machine serial number is found on the registration plate and the engine serial number can be found on the

rocker cover.

Machine Number:- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Engine Number:- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

en-6

2 INTRODUCTION

FIG 2

FIG 1

2.6 ASSEMBLY __________________________________________________________

The Mower is fitted to a container at the factory and will need assembly before operation. Some tools will be

needed for assembly. Discard the container according to the applicable local environmental requirement.

Remove the mower from the container. The handles

are found around the chassis - Figure 1.

The handles engage on the lug shaft (A). A range of

height adjustment is available. Tighten the hand

wheel (C) The handles adjust for reach with the

bolts (B) - Figure 2.

The Grassbox (A) - Figure 3 engages on the mower

by two lugs bolted to the chassis lug (B).

Refer to the OPERATION Chapter before you start

the mower for the first time. Operators MUST read

through this manual and understand the Safety

Instructions, controls, lubrication and maintenance

procedures before any use the Mower.

FIG 3

en-7

INTRODUCTION 2

NOTES

Parts- 8

MATADOR

Illustration:

Engine Group

4300619_Group_Engine_71cm

Otros manuales para Matador 71

Tabla de contenidos

Otros manuales de Cortacésped de Ransomes

Ransomes

Ransomes Matador 71 Manual de usuario

Ransomes

Ransomes HR3806 Manual de usuario

Ransomes

Ransomes MT383 Guía

Ransomes

Ransomes 51 Marquis Guía

Ransomes

Ransomes Greens Super 55 Guía

Ransomes

Ransomes MP493 Manual de usuario

Ransomes

Ransomes FAIRWAY 250 Especificaciones

Ransomes

Ransomes MT503 Guía

Ransomes

Ransomes HIGHWAY 213 Especificaciones

Ransomes

Ransomes 51 Super Certes Guía

Ransomes

Ransomes 36 HYDRO Z-CONTROL MID-16HP KAW SIDE DISCHARGE SELF PROPELLED WALK BEHIND... Manual de usuario

Ransomes

Ransomes Matador Guía

Ransomes

Ransomes Parkway 2250 Plus LGNN040 Manual de usuario

Ransomes

Ransomes HIGHWAY 2130 Guía

Ransomes

Ransomes Fairway 300 Manual de usuario

Ransomes

Ransomes Parkway 2250 Plus Guía

Ransomes

Ransomes HR 9016 Turbo 70526 Manual de usuario

Ransomes

Ransomes 51 Super Certes Manual de usuario

Ransomes

Ransomes HIGHWAY 2130 Guía

Ransomes

Ransomes ZE Series Guía

Ransomes

Ransomes 946700 Manual de usuario

Ransomes

Ransomes CG161 Especificaciones

Ransomes

Ransomes HIGHWAY 2130 Manual de usuario

Ransomes

Ransomes EC Hydro Midsize Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Toro

Toro Groundsmaster 3505-D Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Toro

Toro 74806 Manual de usuario