R&S SMCVB-KB106 Manual de usuario
R&S®SMCV100B
Vector Signal Generator
Getting Started
Getting Started
Version 02
1432704602
(>PÔ^2)
Sie haben Fragen oder wünschen eine Beratung? Angebotsanfrage unter 07121 / 51 50 50 oder über [email protected]
Distributed by:
This document describes the R&S®SMCV100B, stock no. 1432.7000.02 and its
options.
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1432.7046.02 | Version 02 | R&S®SMCV100B
The following abbreviations are used throughout this manual: R&S®SMCV100B is abbreviated as
R&S SMCV100B, R&S®WinIQSIM2TM is abbreviated as R&S WinIQSIM2, R&S®VISA is abbreviated as
R&S VISA.
Contents
R&S®SMCV100B
3Getting Started 1432.7046.02 ─ 02
Contents
1 Safety and Regulatory Information...................................... 7
1.1 Safety Instructions................................................................................7
1.2 Labels on R&S SMCV100B.................................................................10
1.3 Korea Certification Class B................................................................10
2 Documentation Overview....................................................11
2.1 Getting Started Manual.......................................................................11
2.2 User Manuals and Help.......................................................................11
2.3 Service Manual....................................................................................12
2.4 Instrument Security Procedures....................................................... 12
2.5 Printed Safety Instructions................................................................ 12
2.6 Data Sheets and Brochures............................................................... 12
2.7 Release Notes and Open Source Acknowledgment (OSA).............13
2.8 Application Notes, Application Cards, White Papers, etc...............13
3 Key Features........................................................................ 14
4 Preparing for Use.................................................................15
4.1 Lifting and Carrying............................................................................15
4.2 Unpacking and Checking................................................................... 15
4.3 Choosing the Operating Site............................................................. 15
4.4 Setting Up the R&S SMCV100B......................................................... 16
4.4.1 Placing the R&S SMCV100B on a Bench Top...................................... 16
4.4.2 Mounting the R&S SMCV100B in a Rack............................................. 17
4.5 Important Aspects for Test Setup......................................................18
4.6 Connecting to Power.......................................................................... 19
4.7 Connecting to LAN............................................................................. 19
Contents
R&S®SMCV100B
4Getting Started 1432.7046.02 ─ 02
4.8 Connecting Monitor............................................................................ 20
4.9 Connecting USB Devices................................................................... 21
4.10 Connecting to RF 50 Ω....................................................................... 22
4.11 Connecting to Ref In/Ref Out.............................................................22
4.12 Connecting to Dig. IQ HS x................................................................ 23
4.13 Connecting to IP Data Interface.........................................................24
4.14 Switching On or Off............................................................................ 25
5 Instrument Tour................................................................... 28
5.1 Front Panel Tour..................................................................................28
5.1.1 Touchscreen..........................................................................................29
5.1.2 Keys...................................................................................................... 30
5.1.2.1 Utility Keys............................................................................................ 30
5.1.2.2 On/Standby........................................................................................... 30
5.1.2.3 Function Keys....................................................................................... 30
5.1.2.4 Editing Keys.......................................................................................... 31
5.1.2.5 Navigation Controls...............................................................................31
Rotary Knob.......................................................................................... 31
5.1.3 Connectors............................................................................................32
5.2 Rear Panel Tour...................................................................................32
5.2.1 Connectors............................................................................................33
6 Trying Out the Instrument...................................................36
6.1 Generating an Unmodulated Carrier................................................. 37
6.2 Generating a Digitally Modulated Signal.......................................... 39
6.3 Triggering the Instrument with an External Signal.......................... 41
6.4 Enabling and Configuring a Marker Signal...................................... 47
6.5 Verifying the Generated Signal with the Graphics Display............. 48
6.6 Saving and Recalling Settings...........................................................52
Contents
R&S®SMCV100B
5Getting Started 1432.7046.02 ─ 02
6.7 Generating a DAB Signal................................................................... 55
7 System Overview................................................................. 58
7.1 Brief Introduction to the Instrument's Concept............................... 58
7.2 Signal Flow at a Glance......................................................................58
7.3 Internal Baseband Source ("Baseband" Block)...............................60
7.4 Digital Baseband Input/Output ("BB Input"/ "I/Q Digital" Block)... 60
7.5 Additional White Gaussian Noise ("AWGN" Block)......................... 61
7.6 "I/Q Stream Mapper" Block................................................................ 61
7.7 I/Q Modulator ("I/Q Mod" Block)........................................................ 62
7.8 RF ("RF" Block)...................................................................................62
7.9 Applications Examples of the R&S SMCV100B............................... 62
8 Instrument Control.............................................................. 63
8.1 Possible Ways to Operate the Instrument........................................ 63
8.2 Means of Manual Interaction..............................................................64
8.3 Understanding the Display Information............................................64
8.3.1 Status Bar............................................................................................. 65
8.3.2 Block Diagram.......................................................................................66
8.3.3 Taskbar................................................................................................. 67
8.3.4 Additional Display Characteristics.........................................................68
8.4 Accessing the Functionality.............................................................. 70
8.5 Entering Data.......................................................................................71
8.5.1 Entering Numeric Parameters...............................................................72
8.5.2 Entering Alphanumeric Parameters...................................................... 72
8.5.3 Undo and Redo Actions........................................................................ 72
8.6 Getting Information and Help............................................................ 72
8.7 Remote Control................................................................................... 74
Contents
R&S®SMCV100B
6Getting Started 1432.7046.02 ─ 02
8.8 Remote Operation over VNC..............................................................75
9 Contacting Customer Support........................................... 76
Index..................................................................................... 77
Safety and Regulatory Information
R&S®SMCV100B
7Getting Started 1432.7046.02 ─ 02
1 Safety and Regulatory Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the Chapter 1.1, "Safety Instructions",
on page 7.
Intended use
The product is intended for the development, production and verification of elec-
tronic components and devices in industrial, administrative, and laboratory envi-
ronments. Use the product only for its designated purpose. Observe the operating
conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 1.1, "Safety Instructions", on page 7. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
Safety Instructions
Safety and Regulatory Information
R&S®SMCV100B
8Getting Started 1432.7046.02 ─ 02
If any part of the product is damaged or broken, stop using the product. Never
open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. Contact Rohde & Schwarz
customer service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to elec-
tric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides a carrying bag designed for your product, you can
use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the prod-
uct is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Safety Instructions
Safety and Regulatory Information
R&S®SMCV100B
9Getting Started 1432.7046.02 ─ 02
Connecting to power
The product is an overvoltage category II product and has to be connected to a
fixed installation used to supply energy-consuming equipment such as household
appliances and similar loads. Be aware that electrically powered products have
risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●Before switching on the product, ensure that the voltage and frequency indica-
ted on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
●If a product has an exchangeable fuse, its type and characteristics are indica-
ted next to the fuse holder. Before changing the fuse, switch off the instrument
and disconnect it from the power source. How to change the fuse is described
in the product documentation.
●Only use the power cable delivered with the product. It complies with country-
specific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●Only use intact cables and route them carefully so that they cannot be dam-
aged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documenta-
tion or a power supply that conforms to the country-specific regulations.
●Only connect the product to a power source with a fuse protection of maxi-
mum 20 A.
●Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Safety Instructions
Safety and Regulatory Information
R&S®SMCV100B
10Getting Started 1432.7046.02 ─ 02
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
protects you against electric shock should an electric problem occur.
1.2 Labels on R&S SMCV100B
Labels on the casing inform about:
●Personal safety, see "Connecting to power" on page 9.
●Product and environment safety, see Table 1-1.
●Identification of the product, see the serial number on the rear panel.
Table 1-1: Labels regarding R&S
SMCV100B and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see the prod-
uct user manual, chapter "Disposal".
1.3 Korea Certification Class B
이 기기는 가정용(B급) 전자파 적합기기로서 주로 가정에서 사용하는 것을 목적으
로 하며, 모든 지역에서 사용할 수 있습니다.
Korea Certification Class B
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Generador portátil de R&S
R&S
R&S SMCVB-K161 Manual de usuario
R&S
R&S SMJ100A Manual de usuario
R&S
R&S SMBV100B Manual de usuario
R&S
R&S AREG800A Manual de usuario
R&S
R&S AREG800A Manual de usuario
R&S
R&S SMCV100BP1 Manual de usuario
R&S
R&S SMA100B Manual de usuario
R&S
R&S SMBV100B Manual de usuario
R&S
R&S SMCV100B Manual de usuario
R&S
R&S SMCVB-K163 Manual de usuario
