R&S TSMA6-BP Manual de usuario
R&S®TSMA6-BP
Battery Pack Unit
Getting Started
Getting Started
Version 03
4900903002
(a0èN2)
This manual describes the following R&S®TSMA6 accessory:
●R&S®TSMA6-BP Battery Pack Unit (4900.9001.02)
●R&S MNT®BP89WH Battery for R&S®TSMA6-BP (1321.3772.00)
© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
4900.9030.02 | Version 03 | R&S®TSMA6-BP
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.
R&S®TSMA6 is indicated as R&S TSMA6.
Contents
R&S®TSMA6-BP
3Getting Started 4900.9030.02 ─ 03
Contents
1 Safety Information................................................................. 5
2 Documentation Overview......................................................6
2.1 Getting Started Manual.........................................................................6
2.2 Basic Safety Instructions..................................................................... 6
2.3 Data Sheets and Brochures................................................................. 6
3 Key Features.......................................................................... 7
4 Preparing for Use...................................................................8
4.1 Unpacking and Setting Up the Instrument......................................... 8
4.2 Inserting a Battery in the R&S TSMA6-BP........................................10
4.3 Connecting the R&S TSMA6-BP with External Power Supply........11
4.4 Connecting the R&S TSMA6-BP with R&S TSMA6..........................12
4.5 Connecting the R&S TSMA6-BP with R&S TSME6.......................... 14
5 Operation..............................................................................17
5.1 Operation Modes.................................................................................17
5.2 LED Display......................................................................................... 17
5.3 Monitoring Battery Charge State.......................................................18
5.4 Battery Exchange - Hot Swapping.................................................... 19
Index..................................................................................... 22
Contents
R&S®TSMA6-BP
4Getting Started 4900.9030.02 ─ 03
Safety Information
R&S®TSMA6-BP
5Getting Started 4900.9030.02 ─ 03
1 Safety Information
The product documentation helps you to use the R&S TSMA6-BP safely and effi-
ciently. Follow the instructions provided here and in the printed "Basic Safety
Instructions". Keep the product documentation nearby and offer it to other users.
Intended use
The R&S TSMA6-BP is designated for the development, production and verifica-
tion of electronic components and devices in industrial, administrative, and labo-
ratory environments. Use the R&S TSMA6-BP only for its designated purpose.
Observe the operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or dam-
age caused by dangerous situations. Safety information is provided as follows:
●The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S TSMA6-BP.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
Documentation Overview
R&S®TSMA6-BP
6Getting Started 4900.9030.02 ─ 03
2 Documentation Overview
This section provides an overview of the R&S TSMA6-BP user documentation.
Unless specified otherwise, you find the documents on the R&S TSMA6-BP prod-
uct page at:
www.rohde-schwarz.com/manual/tsmx
2.1 Getting Started Manual
Introduces the R&S TSMA6-BP and describes how to set up and start working
with the product. Includes basic operations, typical measurement examples, and
general information, e.g. safety instructions, etc. A printed version is delivered
with the instrument.
2.2 Basic Safety Instructions
Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the instrument.
2.3 Data Sheets and Brochures
The data sheet contains the technical specifications of the R&S TSMA6-BP. It
also lists optional accessories.
The brochure provides an overview of the instrument and deals with the specific
characteristics.
See www.rohde-schwarz.com/brochure-datasheet/tsmx
Data Sheets and Brochures
Key Features
R&S®TSMA6-BP
7Getting Started 4900.9030.02 ─ 03
3 Key Features
The R&S TSMA6-BP allows to enhance the R&S TSMA6 instrument to a portable
measurement solution based on a battery powered system.
Key Features
●Power Supply for R&S TSMA6 in portable applications
●Power Supply for up to 4 R&S TSME6 devices
●Hot-swap support for endless portable mode
●In-bay charging feature with smart battery controller
●Charging display via LED and monitoring window
●SMBus interface with connected R&S TSMA6
Preparing for Use
R&S®TSMA6-BP
8Getting Started 4900.9030.02 ─ 03
4 Preparing for Use
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
●Do not open the instrument casing.
●Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and to connected devices. Ensure the following operating conditions
before you switch on the instrument:
●The instrument is dry and shows no sign of condensation.
●The instrument is positioned as described in the following sections.
●Signal levels at the input connectors are all within the specified ranges.
4.1 Unpacking and Setting Up the Instrument
The following section describes how to setup the instrument.
Unpacking and Setting Up the Instrument
Preparing for Use
R&S®TSMA6-BP
9Getting Started 4900.9030.02 ─ 03
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measure-
ments and to avoid damage to the instrument. Observe the information on
appropriate operating conditions provided in the basic safety instructions
and the instrument's data sheet.
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the instrument for any damage. If there is dam-
age, immediately contact the carrier who delivered the instrument. Make sure not
to discard the box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Accessory list
The following items are included with shipment of the R&S TSMA6-BP:
●12 V DC IN power supply cable with a cigarette lighter adapter
●4 x collar screw M2.5 (screwed to the upper side of the R&S TSMA6-BP)
●Getting Started Manual (Printed)
●Safety instruction booklet
The following items are optional and must be ordered separately:
●Charger for batteries (R&S TSMA-BC4, R&S No. 3630.7708.02)
4-bay charger for batteries including country-specific power cord
Model: RRC PMC02A
Uin = 100 V AC to 240 V AC, max. 65 W
●R&S TSME-ZYC (R&S No. 1514.7290.02)
This DC cable is required to use an R&S TSME6 together with the R&S
TSMA6-BP.
Unpacking and Setting Up the Instrument
Preparing for Use
R&S®TSMA6-BP
10Getting Started 4900.9030.02 ─ 03
4.2 Inserting a Battery in the R&S TSMA6-BP
Only Li-ion battery of the type MNT_BP89WH (R&S No.1321.3772.00)
may be used.
The batteries are not charged on delivery. Before using the R&S TSMA6-
BP with TSMA6/TSME6, connect the TSMA6-BP (without a connected
TSME6 or TSMA6) to a DC power supply and charge the batteries com-
pletely.
The external recharging of the batteries is only allowed via a separate
charger (R&S TSMA6-BC4, R&S No. 3630.7708.02 or R&S TSMA-BC2,
R&S No. 1523.8015.02).
The R&S TSMA6-BP may be used only with closed battery cover.
1. Open the covers of the battery bays.
Figure 4-1: Open battery cover
2. Insert the charged batteries.
The batteries can be inserted only the displayed orientation.
Inserting a Battery in the R&S TSMA6-BP
Tabla de contenidos
Otros manuales de Paquete de baterías de R&S
Manuales populares de Paquete de baterías de otras marcas
IOGear
IOGear GBP24V Series Manual de usuario
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario
Clas Ohlson
Clas Ohlson PW-290A Manual de usuario
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Manual de usuario
Samsung
Samsung EB-U3300 Manual de usuario
ECTIVE
ECTIVE LC Series Manual de usuario