Raiing Medical cHUB Manual de usuario
cHUB User Manual
BT101
1
User Notice
Dear customers, thank you very much for purchasing.
This user manual describes the product features and requirements, main structure,
performance, specifications, correct transportation, installation, use, operation, maintenance,
maintenance and storage methods, as well as the protection of users and product safety measures.
See the chapters for details.
Before using this product, please read the user manual carefully and follow the relevant
requirements of the user manual. This user manual will tell you about the operating procedures
that you must pay attention to while using the product, the operations that may cause abnormal
operation, and the dangers that may cause harm to the product or human. The company does not
assume responsibility for safety, reliability, and performance assurance because of any abnormal
phenomena or personal and machine hazards caused by use, maintenance, or storage not in
accordance with the requirements of this user manual, nor does it provide free maintenance for
such failures.
Due to product updates, your product may not be completely consistent with the description
in the user manual. I apologize.
This user manual is prepared by the company and the copyright belongs to the company.
The user's manual may not be photocopied, copied or translated into other languages without the
written consent of the company.
2
CONTENTS
USER NOTICE .............................................................................................................................. 1
1PRECAUTIONS ........................................................................................................................... 4
1.1 General Precautions ........................................................................................................ 4
1.2 Safety Precautions .......................................................................................................... 4
1.3 EMC Statement ............................................................................................................... 5
2 PRODUCT DESCRIPTION ............................................................................................................. 5
2.1 Features .......................................................................................................................... 5
2.2 Product Use Range ......................................................................................................... 5
3MAIN TECHNICAL INDICATORS ................................................................................................... 5
3.1 Environmental Conditions ................................................................................................ 5
3.2 Main Parameters ............................................................................................................. 6
3.3 Main Performance ........................................................................................................... 6
4EQUIPMENT INTRODUCTION ....................................................................................................... 6
4.1 Equipment Front .............................................................................................................. 6
4.2 Above and Below............................................................................................................. 7
4.3 Annex .............................................................................................................................. 7
5INSTRUCTIONS FOR USE ............................................................................................................ 7
5.1 Start ................................................................................................................................. 7
5.2 Stop ................................................................................................................................. 7
5.3 Scan Code ....................................................................................................................... 8
5.4 Charging .......................................................................................................................... 8
5.5 WiFi Connection .............................................................................................................. 8
3
5.6 Bluetooth Connection ...................................................................................................... 9
6COMMON STATUS ...................................................................................................................... 9
6.1 Charging Prompt ............................................................................................................. 9
6.2 Low Battery Prompt ....................................................................................................... 10
6.3 Low Battery Automatic Shutdown .................................................................................. 10
6.4 Bluetooth Disconnect Prompt ........................................................................................ 10
6.5 WiFi Disconnect Prompt ................................................................................................ 10
6.6 Alarm Prompt ................................................................................................................ 10
7COMMON TROUBLESHOOTING .................................................................................................. 10
8MAINTENANCE ....................................................................................................................... 11
8.1 Cleaning and disinfection .............................................................................................. 11
8.2 Maintenance .................................................................................................................. 11
9 Transport and Storage...................................................................................................... 12
10 SYMBOL MEANING ................................................................................................................ 12
11 COPYRIGHT STATEMENT ........................................................................................................ 13
12 DISCLAIMER ......................................................................................................................... 13
13 FCC NOTICE ........................................................................................................................ 13
4
1 Precautions
1.1 General Precautions
1) Do not wash the product with water. If the equipment is wet or water condensation
occurs, stop the operation.
2) Do not use the device immediately when it is transferred from a cold environment to a
warm and humid place.
3) The equipment has a service life of three years. When it is not available at the end of the
equipment's arrival, do not dispose of it at will. If it is necessary to dispose of the
equipment, it should comply with local regulations.
4) Keep the operating environment free of dust, vibration, corrosive or flammable
substances, and excessively high or low temperature and humidity.
5) Disposal of equipment, its accessories and packaging (batteries, plastic bags, foam,
paper boxes, etc.) is subject to local laws and regulations, otherwise it will cause
pollution in the local environment.
1.2 Safety Precautions
1) This product can only be connected to a DC power supply with a rated voltage of 5V
and a minimum current of 1A.
2) Maintenance is not allowed while the equipment is in use.
3) When not in use for a long period of time, the device should be placed in a cool, dry
place and charged once every three months.
4) Do not use this device in an environment where flammable substances such as
anesthetics are placed.
5) When pressing the scan code button, please do not look directly at the light emitting
device (including scan code light and scan code positioning light), otherwise it may be
harmful to the eyes.
6) Check regularly to ensure that the equipment does not affect the damage to safety
performance and monitoring performance. It is recommended to check it at least once a
week. If there is obvious damage, stop using the device.
5
7) Dispose of equipment, its accessories and packaging (batteries, plastic bags, foam, paper
boxes, etc.) in accordance with local laws and regulations.
8) The maintenance of this equipment is limited to qualified maintenance personnel
designated by the manufacturer. Users should not repair the equipment by themselves.
9) This device is only suitable for use with the sensor or server specified by "RAIING".
Use with devices not specified by RAIING is prohibited.
1.3 EMC Statement
When the device is used, the influence of electromagnetic compatibility should be
considered because other high-electromagnetic devices or environments will affect the normal
operation of the device.
2Product Description
cHUB is a device that receives Bluetooth signal data and forwards the data to the network
via WiFi.
2.1 Features
Compact and beautiful appearance, easy operation, easy to carry.
2.2 Product Use Range
Bluetooth transmission and WiFi transmission transfer each other to achieve different
signal data transmission.
3 Main Technical Indicators
3.1 Environmental Conditions
1) Jobs：
Temperature：10℃～40℃
Relative humidity：0%RH ～75%RH
Working power：Built-in rechargeable lithium battery, voltage 3.7V
6
Charger：Output：DC 5V；1A
2) Transport and Storage：
Temperature：-40℃～+55℃
Relative humidity：≤95%
3.2 Main Parameters
1) Support WiFi protocol standard: IEEE 802.11b/g/n
2) Support Bluetooth 4.0
3.3 Main Performance
1) Connect a Bluetooth transmission device.
2) Connect to the specified WiFi.
3) Receive the converted Bluetooth signal data to the network via WiFi.
4) Data caching function.
5) The cached data is transmitted to the network via WiFi.
6) Low battery indicator.
4 Equipment Introduction
4.1 Equipment Front
1) Power Indicator
2) Bluetooth Indicator
3) WiFi Indicator
4) Alarm Indicator
Figure 4-1
7
4.2 Above and Below
1) Power Button
2) Scan code window
3) Scan code button
4) Reset button
5) Charging port
Figure 4-2
4.3 Annex
1) cHUB 1
2) User manual 1
3) USB data cable 1
5 Instructions For Use
5.1 Start
Press and hold the “Power button” for 2 seconds. When all four front indicators are on, it
indicates that it is starting. After waiting for 40 seconds, the indicator will exit full bright state
and enter the normal flashing state, indicating that the startup is successful.
Note: It is not recommended to start when charging. When charging, the charging prompt
will interfere with the correct judgment of the startup indicator light.
5.2 Stop
Press and hold the “Power button” for 2 seconds. When all four indicators on the front are
8
off, it means the completion of the stop.
Note: If you need to restart the device, wait for the device to shut down completely before
pressing the power button to turn on the device.
5.3 Scan Code
Press and hold the scan code button. At this time, the lighting LED and positioning indicator
of the scan code window are on or blinking. Place the positioning cursor on the bar code or QR
code. After hearing the drop sound, release the scan code button.
Note: If the barcode or QR code is not recognized for a long time, the scanning LED and
positioning indicator will be automatically extinguished. Release the “Scan code
button” and press again to scan the code again.
5.4 Charging
Connect one end of the Micro USB data cable to the power adapter that outputs DC5V 1A,
and connect the other end to the "charging port" of the device, which is about 2 to 3 hours full.
5.5 WiFi Connection
1) Open URL：http://web.remotely.raiing.cn/wifi
2) Enter the SSID and password for the WiFi connection in the web page and click
Generate QR Code to generate the QR code. As shown below：
Figure 5-1
9
Figure 5-2
3) Press Scan Code to scan the generated WiFi configuration code.
4) After the scan code is successful, it will wait for a period of time. The “WiFi indicator”
on the front of the device will be in the steady state, indicating that the WiFi connection
is successful. If it is unsuccessful, please check whether the type of SSID, password or
password you filled in is correct and try again.
5.6 Bluetooth Connection
1) Press the scan code button to scan the SN barcode on the Bluetooth device package or
product.
2) After the scan code is successful, the Bluetooth indicator on the front of the device will
remain on for a while. This indicates that the Bluetooth device is connected
successfully. If unsuccessful, rescan the SN barcode of the Bluetooth device.
Note: Please consult the manufacturer to confirm the availability of Bluetooth devices.
6 Common Status
6.1 Charging Prompt
1) Normal charge state：
The power indicator light on the front of the device flashes slowly (flashes every 2s).
2) Off State：
①Battery is not full：Four indicators on the front of the device flash alternately.
②Battery is full：Four indicators on the front of the device are flashing slowly
(flashing every 2s)。
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
