rada A-TC04 NoirCam Manual de usuario
A-TC04
NoirCam
USER MANUAL
Adena Limited 2023
www.a-dena.com
This manual provides information relevant to the installation of the A-TC04 NoirCam,
as well as its functions and control methods in details. Please read this manual careful-
ly before installing and using the camera.
Precautions
This product can only be used in the specified conditions in order to avoid any damage
to the camera:
To avoid causing damage to the camera, please observe the following key precautions:
1) Do not expose the camera and its components/accessories to rain or moisture.
2) Due to the risk of electric shock, do not open the camera’s casing. Installation and
maintenance of the device should only be carried out by qualified technicians.
3) Do not use the product beyond the temperature, humidity or power supply specifica-
tions stated in this user manual.
4) Please use a soft, dry cloth to clean the camera. If the camera is very dirty, clean it
with a diluted neutral detergent; Using any type of solvents may damage the surface of
the camera, thus you should not use them.
Electrical Safety
Installation and use of this product must strictly comply with the local electrical safety
standards.
Transportation
Avoid any stress, vibration, or moisture during transportation, storage, installation and
operation of the camera.
1
Installation
1) Do not rotate the camera head violently. Doing otherwise may cause mechanical
failure.
2) This camera is designed to be placed on a stable, horizontal surface. Do not install the
camera at
3) This product should be placed on a stable desktop or other horizontal surface. Do not
install the product at an angle, otherwise your camera’s image will be inclined;
4) Ensure there are no obstacles within the camera holder’s rotation range.
5) Do not power on before completing the camera’s installation.
Do Not Dismantle Camera
ADENA Limited is not responsible for any unauthorized modification or changes in the
camera’s behavior produced by dismantling of the product. Unauthorized dismantling of
the product will nullify your camera’s warranty.
Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image produced by
the camera. This is a Class A product; it may cause radio interference in domestic envi-
ronment. If used in such environment, please take this into account and apply appropriate
measures.
2
Table of Contents
1. Quick Installation Guide
1.1 Interface
1.2 Power-on Self-Test
2. Product Overview
2.1 Dimensions
2.1.1 Accessories
2.2 RS-232
2.2.1 RS-232 Jack
2.2.2 RS-232 Mini-DIN 8-pin Terminal Definition
2.2.3 RS-232(DB9) Port Definition
2.2.4 VISCA Networking Method
2.3 Rotary Dial
2.4 Product Features
2.5 Technical Specification
3. Remote Control Functions
IR Remote Control Keys and Commands
3.1 IR Remote Control Key Combinations
3.2 OSD Menu
4. Web interface and settings
4.1 Accessing the Web Interface
4.2 Web Interface Introduction
4.3 Configuration – Streaming
4.4 Configuration – Firmware Update
4.5 Monocular Tracking - Tracking Settings
5. Serial Port Communication Port
5.1 VISCA
5.1.1 VISCA Protocol List
5.1.2 Camera Control Command
5.1.3 Inquiry Command
...................................................................................................................
....................................................................................................................
.............................................................................................................
.............
............................................................................................................................
............................................................................................................
...................................................................................................................................
............................................................................................................
.......................................................
.................................................................................
...................................................................................
..................................................................................................................
..............................................................................................................................
................................................................................
...............................................................................
...............................................................................................................................
..............................................................................................................
..............................................................................................
..................................................................................................
..................................................................................................
......................................................................................
...........................................................................
......................................................................................................
...............................................................................................
...................................................................................
...............................................................................................................................
5
5
5
6
6
6
7
7
7
8
8
9
9
11
15
15
16
17
18
18
18
19
21
22
24
24
24
25
33
......................................................................................................
...............................................................................................................
......................................................................................................................................
...................................................................................................
3
Table of Contents
1. Quick Installation Guide
1.1 Interface
1.2 Power-on Self-Test
2. Product Overview
2.1 Dimensions
2.1.1 Accessories
2.2 RS-232
2.2.1 RS-232 Jack
2.2.2 RS-232 Mini-DIN 8-pin Terminal Definition
2.2.3 RS-232(DB9) Port Definition
2.2.4 VISCA Networking Method
2.3 Rotary Dial
2.4 Product Features
2.5 Technical Specification
3. Remote Control Functions
IR Remote Control Keys and Commands
3.1 IR Remote Control Key Combinations
3.2 OSD Menu
4. Web interface and settings
4.1 Accessing the Web Interface
4.2 Web Interface Introduction
4.3 Configuration – Streaming
4.4 Configuration – Firmware Update
4.5 Monocular Tracking - Tracking Settings
5. Serial Port Communication Port
5.1 VISCA
5.1.1 VISCA Protocol List
5.1.2 Camera Control Command
5.1.3 Inquiry Command
5.2 Pelco-D Protocol Command List
5.3 Pelco-P Protocol Command List
6. Maintenance and Troubleshooting
6.1 Camera Maintenance
6.2 Important Notice
6.3 Troubleshooting
.................................................................................................
..........................................................................................................
..................................................................................................................
...................................................................................... 37
39
40
40
40
41
...................................................................................................................
.......................................................................................
4
1. Quick Installation Guide
1.1 Interface
11. RS-232 Input
12.
RS-232 Output
6. USB Type-A 2.0 Output
3. Fixing Hole
10. RJ-45 Port (Network, PoE+)
7. 3G-SDI Output
5. HDMI Output
4. Tripod Screw Hole
Interface Introduction
1.2 Power-on Self-Test
1) After powering on and running a self-check, the camera will automatically
return to the preset 0 if it is configured.
2) The default address for the IR remote control is №1.
If the camera is returned to factory default settings, the remote control’s default
address will also reset to №1.
15. Power Switch Button
1. IR Sensor for the Remote Control
2. Lens
13. RS-422 (Compatible with RS-485)
Interface
14. DC12V Power Input Jack
8. 3.5mm Line Input
9. Rotary DIP Switch
5
2. Product Overview
2.1 Dimensions
2.1.1 Accessories
When you unpack the product, check that all the supplied accesso-
ries are included:
Supplied
Power adapter
USB2.0 Cable
RS-232 Cable
Camera Setup Guide Leaflet
IR Remote Control
6
2.2 RS-232
2.2.1 RS-232 Jack
2.2.2 RS-232 Mini-DIN 8-pin Terminal Definition
Connection method of the camera to a PC or a
controller.
Camera WindowsDB-9
1.DTR 1.DCD
2.DSR 2.RXD
3.TXD 3.TXD
4.GND 4.DTR
5.RXD 5.GND
6.GND 6.DSR
7.IR OUT 7.RTS
8.NC 8.CTS
9.RI
1
2
3
4
5
6
7
8
Port
DTR
DSR
TXD
GND
RXD
GND
IR OUT
NC
Definition
Data Terminal Ready
Data Set Ready
Transmit Data
System Ground
Receive Data
System Ground
IR Commander Signal
No Connection
NO.
7
Definitions
2.2.3 RS232(DB9) Port Definition
2.2.4 VISCA Networking Method
NO.
1
2
3
4
5
6
7
8
9
Port
DTR
DSR
TXD
GND
RXD
GND
IR OUT
NC
RI
Definition
Data Terminal Ready
Data Set Ready
Transmit Data
System Ground
Receive Data
System Ground
IR Commander Signal IR
No Connection
Ring Indicator
Networking Method
Device 1 Device2
1.DTR 1.DTR
2.DSR 2.DSR
3.TXD 3.TXD
4.GND 4.GND
5.RXD 5.RXD
6.GND 6.GND
7.IR OUT 7.OPEN
8. NC 8.OPEN
8
The product has RS232 input and output interfaces and can be cascaded in the
manner described above.
2.3 Rotary Dial
Caution
After switching the mode and dialing the code, you need to restart the
camera for changes to take effect.
2.4 Product Features
A-TC04 NoirCam is a standalone AI Auto-Tracking Network Camera that works
out of the box. It does not require applications to work and provides a clear,
high-quality UHD image via USB, HDMI, NDI|HX and network outputs, as well as
FHD via 3G-SDI. Advanced tracking algorithm ensures that the camera stays
focused on its target even if there are other potential targets walking in front of
it. It supports two distinct tracking modes, making it suitable for installations in
lecture halls, conferencing halls, auditoriums, and other facilities.
A-TC04 NoirCam is able to stream to RTMP platforms and has an audio input for
you to connect a microphone. Therefore, it can be used not only with specialized
hardware encoders/mixers/switchers, but also independently.
Dial Video Format
0 4KP60
1 4KP50
2 4KP30
3 4KP25
4 1080P60
5 1080P50
6 1080I60
7 1080I50
Dial Video Format
8 1080P30
9 1080P25
A 720P60
B 720P50
C Menu can be switched
D Menu can be switched
E Menu can be switched
F Menu can be switched
!
9
Tabla de contenidos
