R.LiNK 3008 NAC Manual de usuario

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

r.LiNK Video-inserter

RL3-NAC

Compatible with

Citroen vehicles with NAC infotainment

Peugeot vehicles with NAC infotainment

Video-inserter with 2 video inputs,

rear-view camera input and CAN control

Product features

Video-inserter for factory infotainment systems

2 CVBS video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner)

1 Rear-view camera CVBS video-input

Automatic switching to rear-view camera input on engagement of reverse gear

Activatable parking guide lines for the rear-view camera (not available for all

vehicles)

Video-in-motion in drive mode (ONLY for connected video-sources)

AV-inputs PAL and NTSC compatible

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Warning notes

1.4. Connection Video-Interface

1.5. Settings of the 8 Dip switches (black)

1.5.1. Enabling the interface’s video inputs (dip 2-3)

1.5.2. Rear-view camera setting (dip 5)

1.5.3. Choosing the corresponding head unit version

1.6. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation –video interface

2.2. Connection schema

2.3. Connection to the head-unit

2.3.1. Connection LVDS –video interface

2.3.1.1. High version head unit (2 X 4 PIN HSD)

2.3.1.2. Low version head unit (1 X 4 PIN HSD)

2.3.2. Connection to the head-unit –Power / CAN

2.4. Connecting video sources

2.4.1. Video-sources to Video IN1 and Video IN2

2.4.2. Audio insertion

2.4.3. After-market rear-view camera

2.4.3.1. Case 1: Video-interface receives the reverse gear signal

2.4.3.2. Case 2: Video interface does not receive the reverse gear signal

2.4.3.3. Video signal connection for the rear-view camera

2.5. Connecting video-interface and external keypad

2.6. Picture settings and guide lines

3. Interface operation

3.1. By NAVI button

3.2. By external keypad

4. Specifications

5. FAQ –Trouble shooting

6. Technical support

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page4

Compatibility

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For audio inserting, use the possibly existing factory audio-AUX-input

or a FM-modulator. If 2 AV-sources shall be connected to the

infotainment, for audio switching an additional electronic part is

required.

Factory rear-view camera Automatic switching-back from inserted video to factory rear-view

camera is only possible while the reverse gear is engaged. To delay

the switch-back, an additional electronic part is required.

1.2. Checking the compatibility of vehicle and accessories

Brand

Compatible vehicles

Infotainment systems

Citroen

C3 since 2017

C4 Cactus since 2014

C4 Picasso since 2017

C6 since 2016

Jumpy since 2016

Space Tourer since 2016

NAC infotainment systems

Peugeot

208 since 2017

2008 since 2017

3008 since 2016

4008 since 2017

5008 since 2017

Boxer since 2016

NAC infotainment systems

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page5

1.3. Warning notes:

Damage to the head-unit is possible, if this RL3-NAC interface is installed to older

Citroen / Peugeot SMEG or SMEG+ head-units (by Magneti Marelli)! Use this RL3-NAC

interface only on Citroen/Peugeot NAC head-units (by Continental from about 2016-)

Designs and features –see the following pictures:

NAC-Systeme

Furthermore, even when installed to the correct NAC systems, there is also damage to the

head-unit possible if the 4pin HSD connectors of this harness are wrong-plugged.

Prior to installation must be determined whether the head-unit of the vehicle is a

low version head-unit

(single black male 4pin

HSD on backside)

high version head-unit

(double black male 4pin

HSD on the backside)

Please carefully follow the manual for high or low version connection of the head unit!

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page6

1.4. Connection Video-Interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

1.5. Settings of the 8 Dip switches (black)

Some settings have to be selected by the 8 dip-switches at the

video-interface. Dip position down is ON and position up is OFF.

See the following chapters for detailed information.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

No function

set to OFF

No function

set to OFF

Picture customizing

Head unit

Try the 2 possible settings of dip 8 to find the

best picture (quality and size)

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page7

1.5.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It`s recommended to enable only the required inputs, for the disabled will be

skipped when switching through the video interfaces inputs.

1.5.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged

to display a factory rear-view camera or a factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input “Camera-IN” while the

reverse gear is engaged.

Note: Dip 1, 4, 6 and7 are out of function and have to be set to OFF.

1.5.3. Choosing the corresponding head unit version (dip8)

If set to ON, the video interface will communicate with the NAC low-version head unit.

If set to OFF, the high version of the head unit will be adjusted.

Note: Dip 1,4,6 and7 are out of function and have to be set to OFF.

1.6. Settings of the 4 Dip switches (CAN function - red)

Dip position down is ON and position up is OFF.

Navigation / Sy5tem

Dip 1

Dip 2

Dip 3

Dip 4

NAC infotainments

OFF

Set all 4 dips to OFF.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page8

2. Installation

Switch off the ignition and disconnect the vehicle’s battery! The interface needs a

permanent 12V source. If -according to factory rules- a disconnection of the battery has to

be avoided, it should be sufficient to use the vehicle’s sleep-mode. In case, the sleep-mode

doesn’t succeed, the battery has to be disconnected with a resistor lead.

The Interface needs a permanent power supply! If power isn’t directly taken from the

battery, the connection’s power has to be checked for being start-up proven and

permanent.

Before the final installation, we recommend a test-run of the interface. Due to changes in

the production of the vehicle manufacturer, there’s always the possibility of

incompatibility.

2.1. Place of installation –video-interface

The video-interface is performed to be installed at the head unit’s rear side.

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page9

2.2. Connection schema

Version 02.02.2018 HW:CAM-GD (V94) RL3-NAC

Page10

2.3. Connections to the head-unit

Remove the vehicle’s head unit

2.3.1. Connection LVDS –video interface

2.3.1.1. High version head unit

Disconnect the vehicle harness’ female double 4pin HSD

connector from the head unit’s rearside and connect it

to the double 4pin HSD connector of the enclosed

4pin HSD harness.

Connect the waterblue colored female double 4pin HSD

Connector of the 4pin HSD harness to the previously

become free double 4pin HSD connector of the head unit.

Connect the single waterblue colored 4pin HSD connector

of that harness to the waterblue colored 4pin HSD connector

of the video interface.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de vídeo para coche de r.LiNK

r.LiNK

r.LiNK CI-RL4-MIB Manual de usuario

r.LiNK

r.LiNK CI-RL4-MIB-TR Manual de usuario

r.LiNK

r.LiNK RL4-UCON8-CP Manual de usuario

r.LiNK

r.LiNK RL3-MBN51 Manual de usuario

r.LiNK

r.LiNK CI-RL3-MIB92 Manual de usuario

r.LiNK

r.LiNK RL2-UCON8-SM Manual de usuario

r.LiNK

r.LiNK RL3-MIB-4 Manual de usuario

r.LiNK

r.LiNK RL4-NAC Manual de usuario

r.LiNK

r.LiNK CI-RL4-C3D Manual de usuario

r.LiNK

r.LiNK CI-RL3-R40 Manual de usuario

r.LiNK

r.LiNK RL4-NAC08 Manual de usuario

r.LiNK

r.LiNK RL3-SY3 Manual de usuario

r.LiNK

r.LiNK RL3-MIB92 Manual de usuario

r.LiNK

r.LiNK CI-RL3-MIB-4 Manual de usuario

r.LiNK

r.LiNK RL4-MBN51 Manual de usuario

r.LiNK

r.LiNK RL4-R40 Manual de usuario

r.LiNK

r.LiNK CI-RL5-UCON8-CP Manual de usuario

r.LiNK

r.LiNK 27-590 Manual de usuario

Manuales populares de Sistema de vídeo para coche de otras marcas

Stinger

Stinger HEIGH10 RB10RAM13B Manual de usuario

Eonon

Eonon E1057 Manual de usuario

Milion

Milion D2223 Manual de usuario

Metra Electronics

Metra Electronics 99-8153 Manual de usuario

Voxx Electronics

Voxx Electronics HR8MA1 Manual de usuario

Axxera

Axxera AV604Bi Manual de usuario

Clarion

Clarion NX706E Manual de usuario

Pyle view

Pyle view PLDN74BTi Manual de usuario

Clarion

Clarion NX602 Manual de usuario

PowerAcoustik

PowerAcoustik PTID-5850N Manual de usuario

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Guía del usuario

Lanzar

Lanzar SVDVD5 Manual de usuario

Kia

Kia MTXM100YPPE Manual de usuario

Eonon

Eonon E1060 Manual de usuario

Macrom

Macrom M-AN900 Manual de usuario

Hyundai

Hyundai BAPE-L3000N Manual de usuario

Blaupunkt

Blaupunkt DVP 01C Manual de usuario

DP Audio Video

DP Audio Video dbd807nav Manual de usuario

r.LiNK 3008 NAC Manual de usuario

Manuales populares de Sistema de vídeo para coche de otras marcas