Quoizel BST8411MB Manual de usuario

Package Contents

Warnings and Cautions

1of2

For Style BST8411MB

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Crossbar

Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(1)A21MediumBaseBulb150WMaximum,MediumBaseVintageBulbsisrecommended,bulbnotincluded.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care + Maintenance

LightSource:

EstimatedAssembly Time:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Fixture Body

(Step 2 Continued)

out of the crossbar until the correct length is achieved. Once the

backplate and Fixture Body (E) is secure, remove the mounting ball

and Fixture Body (E).

Installation Guide #IS-BST8411MB

2018 QuoizelInc. ReleasedDate:2018-09-12

visit us on-line at www.quoizel.com

Alternate

Mounting screw

STEP 2 Test Fit the Backplate to the Crossbar Assembly-

A. Remove the mounting balls from the Crossbar Assembly (A). Place

the backplate and Fixture Body (E) onto the Crossbar Assembly (A)

and secure with mounting balls. Note: The backplate and Fixture

Body (E) should be snug against the wall and held tight with the

mounting balls. If it is not, adjust the length of the mounting screws

on the Crossbar Assembly (A) by unscrewing the preassembled hex

nut and lock washer and then screwing the mounting screws in or

Mounting Ball

ABackplate

Hex Nut and

Lock Washer Figure 2

Mounting Screw

or Alternate Short

Mounting Screw

Lock screw

Arm

Cage with

Glass Shade

Figure 1

STEP 1 Installing the Crossbar Assembly-

A. Pass the supply wires through the Crossbar Assembly (A). Attach

the Crossbar Assembly (A) to the Outlet Box with the head of the

Green Ground Screw facing you. Secure the Crossbar Assembly (A)

with Outlet Box Screws (not included). Tighten until snug

Note: Use the Alternate Shorter Mounting Screw (B) if your

installation requires a shorter mounting screw.

Mounting Screw

or Alternate Short

Mounting Screw

Supply Wires

with Ground Wire

Outlet Box Screws

(not included)

Outlet Box

STEP 3 - Install Arm, Bulb and Cage with Glass Shade

A. Remove the lock ball from the top edge of the backplate.

B. Place the scroll end of the Arm (D) into the loop and attach the other

end of the Arm (D) over the bolt on the backplate and secure with

previously removed lock ball. Hand tighten until snug.

C. Insert the bulb onto the socket and screw snugly into place.

D. Place the Cage with Glass Shade (F) over the bulb and socket.

Vintage Bulb

(recommended

but not included)

NeckofSocketCup

Lock Ball

Bolt

Backplate

Figure 3

(Scroll End)

Loop

Socket

2of2

2018 QuoizelInc. ReleasedDate:2018-09-12

visit us on-line at www.quoizel.com

STEP 6 -Apply Silicone Sealer

A. Make sure the exterior wall surface and fixture backplate are free

of dirt before applying caulk. Using exterior grade caulk, caulk over

top of backplate and down both sides. Do not caulk the bottom of

the fixture backplate to ensure proper moisture drainage.

Exterior

Grade Caulk

Exterior

Grade Caulk

Backplate

BST8411MB

FINISH: MOTTLED BLACK

NOTE: ALL DIMENSIONS ARE ROUNDED UP

TO THE NEAREST 1/4"

5”

21.5”

Fixture can

only be

mounted in

the direction

indicated

(Step 3 Continued)

Thread Lock Screws (C) onto the cage until it is engaged to the neck

of the socket cup. Carefully release your hands after Cage with

Glass Shade (F) is hung safety by (2) Lock Screws (C).

STEP 4 - Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, no less than 2 inches from the end of the wire. Tighten the

green ground screw.

B. Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Green Ground Screw

on the Crossbar

White wire

from outlet box White wire

from fixture

Black wire from

outlet box (or Red)

Black wire

from fixture

Bare, or Green

Ground wire

from outlet box

Ground wire

from Fixture

Figure 4

Figure 5

Mounting Ball

Backplate

Mounting Screw

or Alternate Short

Mounting Screw

Your fixture is now

assembled and

ready to use.

Enjoy!

Figure 6

11”

11.5”

9”

10.5”

STEP 5 - Install the Fixture Body

A. Position the backplate and Fixture Body (E) onto the Crossbar

Assembly (A). Place the holes in the backplate over the mounting

screws or alternative short mounting screws. Secure the Fixture

Body by using the mounting balls and hand tighten the mounting

balls until snug.

Otros manuales de Luz exterior de Quoizel

Quoizel

Quoizel ASH0092B1 Manual de usuario

Quoizel

Quoizel ALM8406WT Manual de usuario

Quoizel

Quoizel MHE8406K Instrucciones de montaje

Quoizel

Quoizel SNNL8409K Manual de usuario

Quoizel

Quoizel CRN9009IA Manual de usuario

Quoizel

Quoizel Style CCR8406CU Instrucciones de montaje

Quoizel

Quoizel Style CHI8409IB Instrucciones de montaje

Quoizel

Quoizel NY8318P Instrucciones de montaje

Quoizel

Quoizel SNN9009K Instrucciones de montaje

Quoizel

Quoizel NY1794Z Instrucciones de montaje

Quoizel

Quoizel RNL8408WT Instrucciones de montaje

Quoizel

Quoizel Oasis OAS8408Z Instrucciones de montaje

Quoizel

Quoizel RCE8405EK Manual de usuario

Quoizel

Quoizel DRS8411EK Manual de usuario

Quoizel

Quoizel TPE9008MB Manual de usuario

Quoizel

Quoizel ACA8623BN Manual de usuario

Quoizel

Quoizel IS-MBH8409PN Instrucciones de montaje

Quoizel

Quoizel GAR8406SS Manual de usuario

Quoizel

Quoizel SFD8407IB Instrucciones de montaje

Quoizel

Quoizel HC8407IB Instrucciones de montaje

Quoizel

Quoizel TPE8408MB Manual de usuario

Quoizel

Quoizel LWS3445B Manual de usuario

Quoizel

Quoizel HC8409IB Instrucciones de montaje

Quoizel

Quoizel BKR8408K Instrucciones de montaje

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

WE-EF

WE-EF PFL540 LED Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LW8034.003-US Instrucciones de instalación y funcionamiento

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

HEPER

HEPER MINIMO Instrucciones de instalación y funcionamiento

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario