Quasar Science Crossfade X Manual de usuario
Crossfade X
LED Linear Light
ENGLISH
Table of Contents
Copyright ..................................................................................................................................................... 3
Safety Information ............................................................................................................................................ 4
Overview ..................................................................................................................................................... 6
What’s in the Box ..................................................................................................................................... 6
Crossfade X - Overview .............................................................................................................................. 7
Technical Specifications .............................................................................................................................. 7
Physical Installation .......................................................................................................................................... 9
Control ......................................................................................................................................................10
Photometric data ............................................................................................................................................ 11
Spectral Data & Metrics .....................................................................................................................................13
Troubleshooting T8s and Crossfades ........................................................................................................................15
Warranty ..................................................................................................................................................... 16
Copyright ....................................................................................................................................................19
Crossfade X
2
Copyright
Copyright © 2022
All rights reserved.
Original Instructions: English
All rights reserved throughout the world. No part of this publication may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but
not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of Videndum Plc.
Disclaimer
The information contained in this publication is believed to be correct at the time of printing. Videndum Ltd reserves the right to make changes to the information or
specifications without obligation to notify any person of such revision or changes. Changes will be incorporated in new versions of the publication. We are making
every effort to ensure that our publications are updated on a regular basis to reflect changes to product specifications and features. Should this publication not
contain information on the core functionality of your product, please let us know. You may be able to access the latest revision of this publication from our website.
Videndum Production Solutions Ltd reserves the right to make changes to product design and functionality without notification.
Trademarks
All product trademarks and registered trademarks are the property of Videndum Plc.
All other trademarks and registered trademarks are the property of their respective companies.
Published by:
Videndum Production Solutions Ltd
Email: [email protected]
Crossfade X
3
Safety Information
Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these
instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.
Warning Symbols Used in these Instructions
Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these
instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.
WARNING
Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk
of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’.
DANGER
Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle.
Electrical Connection
DANGER
Risk of electric shock. Do not remove cover, no user servicable parts inside the product.
WARNING
Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
DANGER
Refer servicing to qualified service personnel.
Crossfade X
4
Operation
WARNING
Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.
WARNING
Never use flammable or combustible materials and solvents around lights.
CAUTION
The product should not be used outside the operating temperature limits. Refer to the product technical specifi ations for the operating limits
for the product.
WARNING
Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous.
CAUTION
Do not directly look into the light, it can cause harm to your eyes.
CAUTION
Do not look at the LEDs with a magnifying glass or any otheroptical instrument that may concentrate the light output.
Maintenance
DANGER
The fitting of non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could
affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.
DANGER
Never attempt to service this light. Refer servicing to qualified service personnel.
Crossfade X
5
Overview
WHAT’S IN THE BOX
No. Description QTY
1 2', 4' or 8' Crossfade X Light 1
N/A Q-Boot Shock Absorbers 2
N/A AC Power Cord 1
Crossfade X
6
CROSSFADE X - OVERVIEW
1 Power Side
2 Lens Hatch
3 Slim Diffuser
4 Control Side
5 Heat Sink
*Crossfade X - 2' (921-2302) shown as reference
TECHNICAL SPECIFICATIONS
1. Physical Length, Width Height
a. Q15W2060XG, Q25W2060XG, Q50W2060XG, Q75W2060XG, and Q100W2060XG: Width & height = 1.5” 3.81 cm
b. Q15W2060XG: 1’ / 30.5cm pin tip to pin tip
c. Q25W2060XG: 2’ / 61cm pin tip to pin tip
d. Q50W2060XG: 4’ / 122cm pin tip to pin tip
e. Q75W2060XG: 6’ / 183cm pin tip to pin tip
f. Q100W2060XG: 8’ / 244cm pin tip to pin tip
2. Diffusor Length, Width Height
a. Width = 1.5” 3.81 cm
Crossfade X
7
b. Height = 0.75” 1.91 cm
c. Q15W2060XG length: 9 3/16” / 23.3cm
d. Q25W2060XG length: 20 5/8” / 52.4cm
e. Q50W2060XG length: 44 5/8” / 113cm
f. Q75W2060XG length: 68 5/16’ / 174cm
g. Q100W2060XG length: 92’ / 234cm
3. Illuminant technical data
a. Diode set 1: 2000K, duv = 0.0055 (2/3 to ¾ Minus Green correction required for neutral CCT)
b. Intermediary CCT: 3000K, duv = -0.007 (1/4 Plus Green correction required for neutral CCT)
c. Diode set 2: 6000K, duv = 0.003
Crossfade X
8
Physical Installation
Fixture installation configurations and instructions
1. The crossfade lamps will fit any typical T12 clips as well as Quasar Science T12-sized Q-Block mounting blocks (QBK).
2. Quasar Plates or any other device containing T12 clips or T12 Q-blocks can mount crossfade lamps. 4’ or larger lamps may need zip ties to additionally secure
them into the blocks.
3. To mount T12 lamps in these clips or Q-Blocks, simply insert the lamp into the clips until it is fully secure.
Crossfade X
9
Control
• CCT control
•Turn the analog CCT dial to the desired color temperature:
1. • Color temperatures are shown divided by 100 (2000K/100 = 20, 3000K/100 = 30, etc) for legibility and precision marking on the dial
2. Dimming
a. The Q-LED crossfade lamps are capable of dimming down while maintaining color temperature.
b. The Q-LED crossfade lamps are dimmed by an external TRIAC AC source.
c. To Dim Q-LED crossfade lamps, plug the installed P1G into:
i. AC power wired up to a wall-dimmer switch
ii. AC power wired up to a TRIAC dimmer source
• AC power connected to a stand-a-lone TRIAC dimmer plugged into AC-power
• Dimming Equipment recommendations
a. NOTICE The crossfade lamps must be dimmed with TRIAC AC dimming circuits. VARIAC type dimmers will not work.
b. Reverse-phase (trailing edge) TRIAC AC dimming circuits will enable lower dim levels with less potential strobing issues.
c. CFL/LED TRIAC AC dimming circuits must have a circuit that enables stable low voltage operation.
d. The following dimmers work well with crossfade products:
i. Lutron CF line of household dimmers
ii. ETC Sensor
• RatPac dimmer products
Crossfade X
10
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Equipo de iluminación de Quasar Science
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
