qpcom QP-UDB9 Manual de usuario
QP-UDB9
USB to Serial
Converter
Safety Instructions
Always read the safety instructions carefully
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the equipment checked by a service
technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or you cannot get it work
according to User’s Manual.
ii
Table of Contents
1. Introduction .......................................................................................................1
Features ............................................................................................................................. 1
Package Contents .............................................................................................................. 1
System Requirements........................................................................................................ 1
2. Installation .........................................................................................................2
On Windows Vista ............................................................................................................ 2
On Windows 98SE/ME/2000/XP...................................................................................... 4
Verify the Driver Installation on Windows ....................................................................... 5
On Mac OS X.................................................................................................................... 6
Connecting Serial Device.................................................................................................. 8
3. Specifications....................................................................................................9
4. Regulatory Compliance ..................................................................................10
FCC Conditions .............................................................................................................. 10
CE ................................................................................................................................... 10
iii
1. Introduction
1. Introduction
How to find a lighterway to connect your PDA to the USB port on your PC? USB
Serial Converter operates as a bridge between aUSB port and standard RS-232
Serial port. You just easily hook the cable into PC or Hub’s port, and it can connect
any RS-232 device, such as PDA, scanner, printer…etc.
Features
Compliant with the USB 1.1 version specification
Supports RS-232 serial Interface
Supports 500 kbps data transfer rate
USB suspend condition
Plug & Play compatible
USB host device drivers available
Draws its power from USB connection – no extra power adapter required
Supports Windows 98SE, ME, 2000, XP, Vista 32/64-bit and Mac10.x
Package Contents
Before installation, please check the items of the package.
USB Serial Converter x1
Driver CD x1
Quick Installation Guide x1
System Requirements
IBM compatible computer or Mac
Windows98SE, ME, 2000, XP, Vista 32/64-bit, Mac 10.x
USB port available
64 MB RAM or more.
Pentium 233 MHz or higher
USB Serial Converter User’s Manual
2. Installation
On Windows Vista
1. Connect the USB Serial Converter to the USB port on your computer.
2. When the Found New Hardware appears, select Locate and install driver
software (recommended).
3. Insert the provided CD into your CD-ROM drive and click Next. (Sometimes the
installer will automatically proceed to next step.)
2
1. Introduction
1. Introduction
How to find a lighterway to connect your PDA to the USB port on your PC? USB
Serial Converter operates as a bridge between aUSB port and standard RS-232
Serial port. You just easily hook the cable into PC or Hub’s port, and it can connect
any RS-232 device, such as PDA, scanner, printer…etc.
Features
Compliant with the USB 1.1 version specification
Supports RS-232 serial Interface
Supports 500 kbps data transfer rate
USB suspend condition
Plug & Play compatible
USB host device drivers available
Draws its power from USB connection – no extra power adapter required
Supports Windows 98SE, ME, 2000, XP, Vista 32/64-bit and Mac10.x
Package Contents
Before installation, please check the items of the package.
USB Serial Converter x1
Driver CD x1
Quick Installation Guide x1
System Requirements
IBM compatible computer or Mac
Windows98SE, ME, 2000, XP, Vista 32/64-bit, Mac 10.x
USB port available
64 MB RAM or more.
Pentium 233 MHz or higher
1
USB Serial Converter User’s Manual
On Windows 98SE/ME/2000/XP
Note: DO NOT connect the USB Serial Converter to your computer before
completing the driver installation.
1. Insert the provided CD into your CD-ROM drive. Run the Setup file under
x:\Driver\Win98_XP where x: is your CD-ROM drive letter. When the welcome
screen appears, click Next.
2. When the following screen appears, click Finish.
Once the installation is done, connect the converter to a free USB port on your
computer.
4
2. Installation
Verify the Driver Installation on Windows
To verify your converter installation, please launch Device Manager by the steps
below:
On Windows 98SE/ME/2000/XP: Right-click the My Computer icon on the
desktop and select Properties > System > (Hardware) > Device Manager.
On Windows Vista: Right-click the Computer icon on the desktop and select
Properties > Device Manager.
In the Ports (COM & LPT) group, a string similar to USB to Serial Port or Prolific
USB to Serial Comm Port should be displayed.
If there is a question or exclamation mark next to that item, then the driver is not
properly installed. Please delete the item and repeat the installation steps.
Windows 98SE/ME
Windows 2000/XP/Vista
5
USB Serial Converter User’s Manual
On Mac OS X
The provided Mac X driver supports:
Mac OS 10.1 and above for PowerPC based Mac
Mac OS 10.4 and above for Intel based Mac
To install the drivers:
1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD icon
on the desktop and navigate to the directory of \Driver\MacX. Copy and then
paste the PL2303_1.2.1r2.dmg file to the desktop.
2. Double-click the dmg file on the desktop to extract the file. Then double-click
the PL2303_1.2.1 file that is extracted.
3. When the welcome screen appears, click Continue.
6
www.qpcom.com
2. Installation
4. Select a destination disk to install the driver and click Continue.
5. Click Install.
6. When the Authenticate screen appears, enter your password in the provided
field and click OK.
7
Tabla de contenidos
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
