Qomo QIT600F3 Manual de usuario
1
QIT600F3
User Manual
2
Important Reminders
1. This product is suitable for general applications, such as handwritten editing of
document and viewing of multimedia contents, please use this equipment indoors.
2. Please use the accessories supplied in the package. Our company does not provide free
support for damage caused by the accessories not certified by QOMO.
3. Do not touch the power cord with force or wet object, to avoid electric shock or fire.
4. Use properly grounded plugs and sockets, to avoid electric shock and equipment damage.
5. Do not place any flammable or explosive items such as candles, insecticides or cigarettes
near this product.
6. Do not allow any heating device to be near the power cord, the aging of jacket may result
in electric shock or fire.
7. Do not install this product in a poorly ventilated place such as a bookcase or a wall
cabinet, because the high temperature may cause a fire.
8. Do not use a non-standard display holder, to avoid injury.
9. Do not spray liquid such as detergent directly onto the display, to avoid damage, electric
shock or fire.
10.Unplug the power cord before cleaning the product.
11.Do not open the back cover to avoid electric shock or fire. This product can only be
repaired by a agent authorized by QOMO.
12.Do not place this product in a place with oil, smoke or moisture, or install it on the
vehicle, to avoid failure, electric shock or fire.
13.Please remove the power cord during storms or lightning, or if it is not used for a long
period.
14.If the display has been used for a long time, black or uneven spots may appear on its
surface. This is a normal aging phenomenon. Please turn off the display periodically to
extend its working life.
3
Contents
Chapter 1: Product Information.................................................................................................... 4
1-1. Product Introduction......................................................................................................4
1-2. Part Name and Function Introduction........................................................................... 5
Chapter 2: Use of tablet................................................................................................................ 7
2-1. Start/Shutdown.............................................................................................................. 7
2-2. Tablet Setting.................................................................................................................7
Chapter 3: Passive Handwriting Pen...........................................................................................12
3-1. Introduction of Passive Pen......................................................................................... 13
3-2. Driver Installation (For MAC).................................................................................... 13
3-3. Personalized Setting of Driver.....................................................................................14
3-4. Introduction to Driver Interface...................................................................................15
3-5. Pen Button Setting....................................................................................................... 15
3-6. Pressure Sensitivity setting..........................................................................................16
3-7. Calibration................................................................................................................... 16
3-8. Driver Uninstallation................................................................................................... 16
Chapter 4. References................................................................................................................. 17
4-1. Use of USB Extension Port (Universal Serial Bus).................................................... 17
Product Specifications................................................................................................................ 18
4
Chapter 1: Product Information
1-1. Product Introduction
The tablet combines the technical advantages of the LCD screen and the electromagnetic
handwriting input, to write on the screen in a free and simple way and thus improve working
efficiency. The products are widely used in medical treatment, business meetings, multimedia
teaching and other related fields.
Product Features:
1.21.5 Inch IPS LCD screen;
2.1920*1080 FHD display;
3. Handwriting or passive pen writing;
4. 8192 level handwriting pressure sensitivity;
5. Support HDMI input or output;
6. USB 3.0 ports extension;
7. Compatible system Win 7,8,10, chrome OS, MAC
5
1-2. Part Name and Function Introduction
Part No.
Part name
Function description
①
Display screen
Screen display area / electromagnetic handwriting area
②
Function
buttons
Power on/off key: Press and hold to turn on / off the tablet
Touch on/off: Turn capacitive touch on/off
③
Indicator light
Green: Working mode Red: Standby mode
④
Speaker
Stereo Audio
⑤
USB
2*USB 3.0 extension port (working current: <1A)
⑥
Touch
Touch input
⑦
HDMI in
HDMI input
⑧
HDMI out
2 HDMI outputs-for sharing on multiple screen
⑨
Power input
Power input
⑩
Pen holder
For handwriting pen
⑪
Stand
Adjustable stand
6
1
Turn on/off touch/Back
4
Menu
2
Volume/Down adjust
5
Power on/off
3
Volume/Up adjust
6
Power Indicator
1-3．Product Installation
1-3-1. Connection process
1Connect the computer to the HDMI IN port on the tablet using an HDMI cable.
2Next enable touch control by connecting the computer to the touch port using a USB A-B
cable. The USB Type-B (square port) connects to the tablet.
2
3
4
5
1
6
7
3To share the monitor screen to large format displays and projectors, connect the
HDMI-OUT ports on the tablet to the HDMI-IN ports on your desired displays.
4Connect the power adapter to the tablet and plug into a wall port to turn the tablet on.
5Use the USB extender ports to connect a mouse, keyboard, or thumb drives.
Chapter 2: Use of tablet
2-1. Start/Shutdown
1. Press and hold the “Power” button for 1 second to start the tablet, the LED light will be green
2. Press and hold the “Power” button for 1 second to shut off the tablet, the LED indicator will
be also turned off.
3. Menu: To enter Menu setting. When it is in the Menu interface, this is a confirm button.
5. Volume setting: Press -/+ to set volume value.
6. Touch on/off: Press Touch ON/OFF to turn on/off the touch. It is also a back button.
2-2. Tablet Setting
Picture setting
8
1. Brightness setting: Continuously press “MENU” button for three times to enter brightness setting
page. Press “+” and “-” buttons to adjust the brightness of screen, press “MENU” button to confirm,
and press “TOUCH” button to exit the menu.
2. Gamma setting: Continuously press “MENU” for two times to enter picture setting page. Press
“+” and “-” buttons to set gamma value, press MENU to confirm, and press “TOUCH” button to
exit the menu.
Color setting
1. Color temperature setting: Press “MENU” button to enter menu page, press “+” button to
move the cursor to the color interface, press “MENU” button twice to enter color adjustment
interface. Press “+” and “-” buttons to select the corresponding color temperature parameter. Press
“MENU” button to confirm, and press “TOUCH” button to exit the menu.
9
2. Custom setting of color: Press “MENU” button to enter menu page, press “+” button to move
the cursor to the color interface, press “MENU” button twice to enter color setting interface. Press
“+” button to move to the user and press “MENU” button to enter user interface. Press “+” and “-”
buttons to move the the cursor to select the color type, and press “MENU” button to enter
adjustment. Press “+” and “-” buttons to adjust the parameters, press “MENU” button to confirm,
and press “TOUCH” button to exit the menu.
Menu Setting
1. Horizontal setting: Press “MENU” button to enter menu, press “+” button to move the cursor to
the menu interface, and press “MENU” button twice to enter horizontal position adjustment
interface. Press “+” and “-” buttons to adjust the horizontal position of OSD menu, press “MENU”
button to confirm, and press “TOUCH” button to exit the menu.
2. Vertical setting: Press “MENU” button to enter menu, press “+” button to move the cursor to
the menu interface, and press “MENU” button to enter menu adjustment interface. Press “+” button
10
to move the cursor to the vertical position, and press “MENU” button to enter vertical position
adjustment interface. Press “+” and “-” buttons to adjust the vertical position of OSD menu, press
“MENU” button to confirm, and press “TOUCH” button to exit the menu.
3. Transparency setting: Press “MENU” button to enter menu, press “+” button to move the
cursor to the menu interface, and press “MENU” button to enter menu adjustment interface. Press
“+” button to move the cursor to transparency, and press “MENU” button to enter transparency
adjustment interface. Press “+” and “-” buttons to adjust the display transparency parameters of
OSD menu, press “MENU” button to confirm, and press “TOUCH” button to exit the menu.
4. Time setting: Press “MENU” button to enter menu, press “+” button to move the cursor to the
menu interface, and press “MENU” button to enter menu adjustment interface. Press “+” button to
move the cursor to display time, and press “MENU” button to enter display time adjustment
interface. Press “+” and “-” buttons to adjust the display retention time of OSD menu, press
“MENU” button to confirm, and press “TOUCH” button to exit the menu.
Tabla de contenidos
Otros manuales de Monitor de Qomo
Qomo
Qomo Journey 13 series Manual de usuario
Qomo
Qomo Journey 13 series Manual de usuario
Qomo
Qomo BUNDLEBOARD G PANEL Manual de usuario
Qomo
Qomo JOURNEY 14 Manual de usuario
Qomo
Qomo Journey 13 Manual de usuario
Qomo
Qomo QIT600F2 Manual de usuario
Qomo
Qomo QITBB65H Manual de usuario
Qomo
Qomo QIT600F1 Manual de usuario
