Qlightec S60R Manual de usuario

5020

S60R

• Protection rating : IP44

• Ambient operating temperature : -20°C to +50°C

S60R

220

[Model

number] [Voltage] [Color]

| | |

• S60R • 12 - DC12V

• 24 - DC24V

• 110 -AC110V

• 220 -AC220V

R-Red

A-Amber

G-Green

B-Blue

Model

number

Voltage Current

Bulb specications

Certicate

Weight

Color

Volts/

Watts

Conguration

Part#

S60R

DC12V

0.484A

12V5W

T16x35

15S

0.18kg R-Red

A-Amber

G-Green

B-Blue

DC24V

0.310A

24V5W

AC110V

0.072A

110V5W

T16x35

15D

-0.27kg

AC220V

0.036A

220V5W

Ordering Specications

Bulb Revolving Warning Light

Thank you for purchasing Qlight’s products. Please read this user manual carefully

prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. Please remove any objects that can interrupt ventilation around the product.

2. Please turn o󰀨 the power of the product immediately if it fails to operate properly.

3. Carefully wire the product according to each product’s specication.

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.

5. Do not apply excessive force/impact to the product.

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the

product that would void the warranty.

1. During wiring or maintenance, please completely turn o󰀨 the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection

ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,

malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to

follow these instructions may lead to re, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to

follow this may cause damage to property, re, electric shock and loss of life.)

Product Specications

Please scan the QR code

for more

detailed product information.

www.qlight.com

•

External power line -

UL1015 AWG18(0.75sq) x 2C 400mm

Parts Denition/ Installation/ Mounting Hole Specications/ Bulb Replacement Instructions

■ Parts Denition/ Installation

Wiring InstructionsDimensions

(Units : mm)

■ Mounting Hole Specications

• Machine holes on the mounting surface referring to the

diagram below.

• First, remove the ange nuts from bolts and place the

product through the mounting surface holes.

• Fasten the ange nuts on the opposite side of the

mounting surface until the product is tightened securely.

Reector

(Heat resistant ABS)

Lens(AS)

Light bulb

Housing(ABS)

Flange nut

Flat washer

Red

Black

White

Black

Power

Fuse

PCD 38

3-Ø5 HOLES

Min.Ø5 CABLE ENTRY

S60R

Ø70

15 121

Ø8 CABLE ENTRY PCD 38

360°/3-M4 BOLT

• Please wait at least 1 minute after turning o󰀨 the power

before replacing the bulb.

• In order to dissemble the bulb, please push down the bulb(①)

lightly and screw it counterclockwise.

• In order to put the bulb in to the unit, please place the bulb(①)

in the socket(②) and screw it clockwise while lightly pushing

down the bulb.

■ Bulb Replacement Instructions

Assemble

bulb

Disassemble

bulb

①

②

Mounting Accessories (Sold Separately)

Dimensions

S60R

TWS45 TWA45

• Please refer to the dimensions below for installation of mounting brackets

Installation Environment and Protection Rating

• This product is designed for use with protection rating of IP44.

• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating

indicated(IP44), it may cause malfunction or damage to the product.

• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-

down positions where water can potentially penetrate into the product and impact it’s operation.

• For further information, please visit our website(www.qlight.com).

Qlight Co., Ltd. www.qlight.com | [email protected]

Head O󰀩ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea

Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154

Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)

Qlight OverSEAs Sales Dept |

704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100

Qlight Public Relations & Marketing Team O󰀩ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017

Qlight USA, Inc. www.qlight.com www.qlightusa.com | [email protected]

3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1-408-519-5740 Fax. +1-408-519-5739

SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | [email protected]

China Factory/ Shanghai Sales O󰀩ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86

6651

7100 Fax. +86

6315

3929

China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China

Tel +86

513

8384

9999 Fax +86

513

8384

9910

Product Operation Inquiry / Customer Support +82-51-620-4100

You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.

※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507)

Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)

For your safety

Specication and dimensions listed in this catalogue subject to change without notice for product quality improvement.

The newest product information is available on our website.(www.qlight.com)

Please read the instruction manual attached to the product carefully before installation and use.

www.qlight.com

EN - S60R - 2106A

LED Steady/ Flashing Signal Light

S60L

• Protection rating : IP44

• Ambient operating temperature : -30°C to +50°C

S60L

220

[Model number] [Voltage] [Color]

| | |

• S60L • 12/24

- DC12V~24V

• 110 - AC110V

• 220 - AC220V

R-Red

A-Amber

G-Green

B-Blue

Model

number

Voltage Current

Certicate

Weight

Color

S60L

DC12V~24V Max.0.120A

0.15kg R-Red

A-Amber

G-Green

B-Blue

AC110V 0.025A

0.20kg

AC220V 0.015A

Thank you for purchasing Qlight’s products. Please read this user manual carefully

prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. Please remove any objects that can interrupt ventilation around the product.

2. Please turn o󰀨 the power of the product immediately if it fails to operate properly.

3. Carefully wire the product according to each product’s specication.

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.

5. Do not apply excessive force/impact to the product.

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the

product that would void the warranty.

1. During wiring or maintenance, please completely turn o󰀨 the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection

ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,

malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to

follow these instructions may lead to re, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to

follow this may cause damage to property, re, electric shock and loss of life.)

Ordering Specications Product Specications

Please scan the QR code

for more

detailed product information.

www.qlight.com

5030

Reector

(Heat resistant ABS)

Parts Denition/ Installation/ Light Function Selection/ Mounting Hole Specications

■ Parts Denition/ Installation ■ Light Function Selection

■ Mounting Hole Specications

Lens(AS)

LED unit

•

External power line -

UL1015 AWG18(0.75sq) × 2C 400mm

•

This product can be wired regardless of polarity.

S60L

Ø70

Ø8 CABLE ENTRY

121

PCD 38

360°/3-M4 BOLT

Wiring InstructionsDimensions

(Units : mm)

Red

Black

White

Black

Power

Fuse

Housing(ABS)

Flange nut

Rubber spacer

Flat washer

• Please refer to the chart below to use light function selection

switch located inside the product.

•

Default function is set at steady LED. Select the desired function

for your application during installation.

▶ L : Steady ▶ LF : Flashing

• Machine holes on the mounting surface referring to the

diagram below.

• First, remove the ange nuts from bolts and place the

product through the mounting surface holes.

• Fasten the ange nuts on the opposite side of the

mounting surface until the product is tightened securely. PCD 38

3-Ø5 HOLES

Min.Ø5 CABLE ENTRY

Mounting Accessories (Sold Separately)

Dimensions

S60L

TWS45 TWA45

• Please refer to the dimensions below for installation of mounting brackets

Installation Environment and Protection Rating

• This product is designed for use with protection rating of IP44.

• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating

indicated(IP44), it may cause malfunction or damage to the product.

• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-

down positions where water can potentially penetrate into the product and impact it’s operation.

• For further information, please visit our website(www.qlight.com).

Qlight Co., Ltd. www.qlight.com | [email protected]

Head O󰀩ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea

Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154

Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)

Qlight OverSEAs Sales Dept |

704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100

Qlight Public Relations & Marketing Team O󰀩ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017

Qlight USA, Inc. www.qlight.com www.qlightusa.com | [email protected]

3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 - 408 - 519 - 5740 Fax. +1 - 408 - 519 - 5739

SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | [email protected]

China Factory/ Shanghai Sales O󰀩ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86

6651

7100 Fax. +86

6315

3929

China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China

Tel +86

513

8384

9999 Fax +86

513

8384

9910

Product Operation Inquiry / Customer Support +82-51-620-4100

You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.

※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507)

Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)

For your safety

Specication and dimensions listed in this catalogue subject to change without notice for product quality improvement.

The newest product information is available on our website.(www.qlight.com)

Please read the instruction manual attached to the product carefully before installation and use.

www.qlight.com

EN - S60L - 2106A

Ordering Specications

LED Revolving Warning Light

• Protection rating : IP44

• Ambient operating temperature : -20°C to +50°C

Thank you for purchasing Qlight’s products. Please read this user manual carefully

prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. Please remove any objects that can interrupt ventilation around the product.

2. Please turn o󰀨 the power of the product immediately if it fails to operate properly.

3. Carefully wire the product according to each product’s specication.

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.

5. Do not apply excessive force/impact to the product.

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the

product that would void the warranty.

1. During wiring or maintenance, please completely turn o󰀨 the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection

ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,

malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to

follow these instructions may lead to re, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to

follow this may cause damage to property, re, electric shock and loss of life.)

Product Specications

Please scan the QR code

for more

detailed product information.

www.qlight.com

5020

S60LR

220

[Model number] [Voltage] [Color]

| | |

• S60LR • 12 - DC12V

• 24 - DC24V

• 110 -AC110V

• 220 -AC220V

R-Red

A-Amber

G-Green

B-Blue

Model

number

Voltage Current

Certicate

Weight

Color

S60LR

DC12V 0.183A

0.21kg R-Red

A-Amber

G-Green

B-Blue

DC24V 0.127A

AC110V 0.040A

0.28kg

AC220V 0.020A

PCD 38

3-Ø5 HOLES

Min.Ø5 CABLE ENTRY

•

External power line -

UL1015 AWG18(0.75sq) x 2C 400mm

S60LR

Ø70

15 121

Ø8 HOLES PCD 38

360°/3-M4 BOLT

Parts Denition/ Installation/ Mounting Hole Specications

■ Parts Denition/ Installation

Wiring InstructionsDimensions

(Units : mm)

■ Mounting Hole Specications

• Machine holes on the mounting surface referring to the

diagram below.

Reector

(Heat resistant ABS)

LED unit

Lens(AS)

Housing(ABS)

Flange nut

Rubber spacer

Flat washer

• First, remove the ange nuts from bolts and place the

product through the mounting surface holes.

• Fasten the ange nuts on the opposite side of the

mounting surface until the product is tightened securely.

Red

Black

White

Black

Power

Fuse

Tabla de contenidos

Otros manuales de Equipo de iluminación de Qlightec

Qlightec

Qlightec STND Series Manual de usuario

Qlightec

Qlightec S80ADR Manual de usuario

Qlightec

Qlightec STG40 Manual de usuario

Qlightec

Qlightec ST45ML-Ex Manual de usuario

Qlightec

Qlightec QTG50(M)L Manual de usuario

Qlightec

Qlightec SNE Manual de usuario

Qlightec

Qlightec ST45ML-NEC Manual de usuario

Qlightec

Qlightec STB45ML-Ex Manual de usuario

Qlightec

Qlightec ST56MEL-BZ-3-24-RAG-JC Manual de usuario

Qlightec

Qlightec S50L Manual de usuario

Qlightec

Qlightec MTG50 Series Manual de usuario

Qlightec

Qlightec S150US Manual de usuario

Qlightec

Qlightec QTEX Manual de usuario

Qlightec

Qlightec STA35SL Manual de usuario

Qlightec

Qlightec SEA Manual de usuario

Qlightec

Qlightec QTG-WIZ Manual de usuario

Qlightec

Qlightec SKLR Manual de usuario

Qlightec

Qlightec SEDL Manual de usuario

Qlightec

Qlightec S80AR Manual de usuario

Qlightec

Qlightec QLEX-SLM-650-EMG Manual de usuario

Qlightec

Qlightec STND100-N Manual de usuario

Qlightec

Qlightec QCML Series Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario