Qlight Q125L Manual de usuario

Q125L/Q125LP/Q125LW

Thank you for purchasing QLight products. Please read this manual

carefully before installing this product for safe and long use.

▪Having long life of light source by adopting high-brightness LED

and suitable for machines having lots of vibration and impact with

high durability.

▪Excellent in diffusing effect by employing our own unique direct-

diffusion system.

▪Possible to select suitable operation by using built-in

steady/flashing selection switch according to the purpose of use.

▪Possible to install various way according to installing condition.

Q125LW: Wall mounting type, Q125LP: Pole mounting type

▪Material : Lens-PC, Body-ABS, PIPE-AL, BRACKET-ABS

▪Flashes(when flashing) : 60~80/min.

▪BUZZER : 80±3dB at 1M (it is optional item)

▪Protection : IP65

Model

Voltage

Current

Weight

Flashes

Color

Q125L

DC12V

0.235A

0.23Kg

60~80/min.

Red-R

Amber-A

Green-G

Blue-B

DC24V

0.13A

0.23Kg

AC110V

0.062A

0.25Kg

AC220V

0.042A

0.25Kg

Q125L

Q125LW

Q125LP

Power line UL1015-NO.18 (0.75sq) x 2C 400mm comes out from the

product.

▪In case of product using AC voltage, connect the line without

Polarity(wire color).

▪In case of product using DC voltage, black line is negative(-).

▪If possible, please mount as the direction of vertical and at the

place where low vibration and low impact.

▪Please make a suitable hole on the place where the product will

be mounted by a Drill by referring to dimension on the below

drawing.

▪In case of direction mounting type, fix the product by using

Nuts(M4-3EA) attached on mounting bolt on the bottom of the

product.

▪In case of pole mounting type, mount it by using nuts attached

on the Pole.

▪Mount it by using mounting bolts M8-2EA for L-type bracket and

mount it by using another mounting bolts M5-4EA for Wall

mounting type and round type bracket.

OPERATING MANUAL

LED Steady/Flashing Light

www.microlectra.nl info@microlectra.nl

■Direct mounting type

Q125L Series

PCD 85, Ø5x3

▪fix the product by using Nuts(M4-3EA) attached on mounting bolt

on the bottom of the product.

■Wall mounting type

Q125LW Series

PCD 55, Ø6x4

■POLE mounting type

Division

Q125LP Series

Standard

SCREW & NUT 18mm

L-type bracket

LB24

Wall bracket

LW24

Round Bracket

SZ24

Folding round Bracket

SL24

■POLE mounting type detailed specification

In case of pole mounting method, there are mainly 5 types

according to purpose or condition of mounted place. And

please mount it according to the kinds of mounting bracket by

refer to below contents.

Model

Dimension

24mm

SCREW & NUT

(Standard types)

LB24

LW24

SZ24

SL24

There is built-in Switch to select Steady/Flashing operation on the

assembling circuit board for convenience of user. Refer to the

following drawing and explanation for right operation.

1) Lens Removal

Remove lens by turning it counterclockwise and make sure

related parts on the assembling board.

2) Selecting Steady/Flashing Type

Choose steady light or flashing light by using Steady/Flashing

Selecting switch(1)- SELECTOR(1). “L” mode of the switch is for steady

type and “LF” mode is for flashing type.

3) Lens Assembling

Assemble the product in reverse order of separating.

Selecting Steady/Flashing Type

www.microlectra.nl [email protected]

▪If using voltage is seriously higher or lower than rated voltage, it

can reduce the self-life of the product or can cause a problem on

product operating. Make sure the using voltage does not exceed +/-

5% of the rated voltage.

▪If lens or body of the product is contaminated by chemicals such as

thinner, benzene, the product can be damaged, discolored or

deformed. Please be careful.

▪Do not give strong impact to the product. It can be a reason of wire

disconnection or short circuit.

▪Do not strongly pull the wire out from the product. It can cause a

disorder.

Situation

Main reason

Solution

Non- Lighting Partly

LED is partly damaged,

supplying higher voltage

then rated voltage.

Making Sure Using

Voltage

Feeble Lighting

Supplying Voltage Lower

Than Rated Voltage

Making Sure Using

Voltage

Lighting but

Non-Flashing

Wrong Operating L/LF

Selection Switch

Convert L/LF Selection

Switch

Problem L/LF Selection

Switch

Contact QLight or Their

Agent

Neither Lighting nor

Flashing

Wrong Wiring

Making Sure Wiring

No Power Supply

Making Sure Power Supply

www.microlectra.nl [email protected]

Microlectra bv.

Augustapolder 12. 2992 SR Barendrecht. The Netherlands.

www.microlectra.nl [email protected]

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de iluminación de Qlight

Qlight

Qlight S50B Manual de usuario

Qlight

Qlight ST45ML Series Manual de usuario

Qlight

Qlight S60LR Manual de usuario

Qlight

Qlight QMHL-150 Manual de usuario

Qlight

Qlight SSEL Series Manual de usuario

Qlight

Qlight ST45ML Series Manual de usuario

Qlight

Qlight MTG60 Series Manual de usuario

Qlight

Qlight QWCD35-TI Manual de usuario

Qlight

Qlight SNE-TI Manual de usuario

Qlight

Qlight SHD Manual de usuario

Qlight

Qlight S80RK Manual de usuario

Qlight

Qlight S100E Manual de usuario

Qlight

Qlight QTG50ML Manual de usuario

Qlight

Qlight S80AR Manual de usuario

Qlight

Qlight QTG50 Series Manual de usuario

Qlight

Qlight S100R Manual de usuario

Qlight

Qlight S80ADR Manual de usuario

Qlight

Qlight CPK-CAN Manual de usuario

Qlight

Qlight STA25SLM Series Manual de usuario

Qlight

Qlight S80AL Manual de usuario

Qlight

Qlight QWSL150 Manual de usuario

Qlight

Qlight S100S Manual de usuario

Qlight

Qlight ST45ML-NEC Manual de usuario

Qlight

Qlight S60R Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario