Pyronix Atlas LCD Manual de usuario

Rins139 Issue 4



USER GUIDE

To Be Used With The Atlas 4 and Atlas 8 Control Panels

(

Rins139 Issue 4

WELCOME

Thank you for purchasing the

Atlas Panel

. This panel uses the latest technology in design

and manufacture.

As the end user of the Atlas this manual is written to help you use the functions of your

alarm system enabling you to get the best out of your system. The capability of the panel

means that the engineer can carry out any alterations to programming of the alarm without

having to visit the installation.

NOTE: The fire zone is intended as an extra feature to the alarm system and must not be

regarded as a total fire protection system.

There are two levels of user access to the system:

The Master Code (Code 1) defaulted to: 1 2 3 4, access to all user functions and

programming features.

The User Codes (Codes 2 to 7) - 6 codes, allow setting / unsetting of the panel and viewing

of the event log only.

Fire

To activate the fire alarm, press and hold the and keys together.

Personal Attack

To activate the personal attack, press and hold the and keys together.

System Test

Press

Use the down scroll key to display ´6<67(07(67µ

Press to accept.

Use the right key to scroll through the following tests.

GLVSOD\WHVW

VWUREHWHVW

EHOOWHVW

VRXQGHUVWHVW

After last test, ‘System Test’ is exited automatically.

Change Text

Press

Use the down scroll key to display “FKDQJHWH[Wµ

User 1 will now be displayed, use the up / down scroll keys to scroll through

the user definable text. When the required user name is displayed the text can be changed

by using the numeric keys which are marked with their alternative letter functions, to move

from letter to letter press the keys several times. To move along the display text letters use

the left / right scroll keys. To insert a space press the 0 key twice.

To save changes to the text the key must be pressed.

Set Backlight

Press

Use the down scroll key to display “VHWEDFNOLJKWµ

Use the up / down keys to select the desired backlight brightness.

To save changes the key must be pressed.

Rins139 Issue 4

Walk Test

Press

Use the down scroll key to display ´ZDONWHVWµ

Press to accept.

Use the up/down scroll keys to display the Set mode required. e.g.. ´VHWDµ

Press to accept.

Display reads ´HQWHUFRGHµEnter the Master User Code .

Press to accept.

Walk test the system, each zone triggered during walk test will be entered in the event log.

Enter Master Code to exit walk test mode.

Pulse PGM

Press

Use the down key to display ´38/6( 3*0µ or the new label programmed by the

engineer.

Press to accept. The dual tone is heard on acceptance and ´RSHUDWLQJµ is displayed.

If ´127$87+25,6('µ is displayed the option has not been configured by the engineer.

Accept Calls

Press the menu key

Use the down key to display ´DFFHSWFDOOVµ.

Press to accept. The dual tone is heard on acceptance and ´+5$&7,9(µ is displayed.

MASTER AND USER FUNCTIONS

Setting The Panel

Press The display reads ´VHWV\VWHPµ

Press to accept. Display reads ´VHWDµ

Use the down scroll key to display the set mode required. e.g. ´VHWEµ

Press to accept.

Enter user code Exit timer starts countdown.

Exit the building.

Quick Setting

Enter user code and press a function key or for the set

required.

Set With Omits

Press

Use the down scroll key to display ´VHW:,7+20,76µ

Press to accept. Display reads ´VHWDµ

Use the down scroll key to display the Set mode required. e.g.. ´VHWEµ

Press to accept and enter a User Code .

Display reads ´20,7=21(6µ Enter zone or zone numbers to be omitted.

1. This can be done by two methods.

Either press a numerical key representing the required zone (the zone selected is then

displayed and accepted) and pressing the key after all the zones have been selected.

2. Use the up/down keys to display the required zone and selecting each

required zone using the key. After all the required zones have been selected press

the key to accept the programming.

Exit timer starts countdown.

Exit the building.

Rins139 Issue 4

Unsetting The Panel

Enter the building via one of the programmed Entry/Exit Zones.

To Unset the panel Enter Master / Manager or User Code.

Select Chime

Press

Use the down scroll key to display ´VHOHFW&+,0(µ

Press to accept. Display reads ´FKLPHRQ RII ´

Use the up key to turn the chime on or use the down key to turn the chime

off

Reading The Event log

Press

Use the down scroll key to display ´GLVSOD\/2*µ

Press to accept.

The last event is displayed, use the and keys to display the previous events.

To exit Event Log press .

MASTER ONLY FUNCTIONS

Clear Event Log

Press

Use the down scroll key to display ´&/($5/2*µ

Press to accept.

If allowed by the Engineer ´ORJ FOHDUHGµ will be displayed and a two tone sound will be

heard, if not allowed ´QRWDXWKRULVHGµ will be displayed.

Change User Code

Press

Use the down scroll key to display ´&+$1*(&2'(6µ

Press to accept.

Display reads´NH\PDVWHUFRGHµ Enter (Master or Manager Code)

Display reads ´SUHVVXVHUWRµ

Enter a number between 1 to 7 for the code you require to change.

1 = Master Code (Master Code can only be changed by Master User)

2,3,4,5,6 and 7 = User Codes.

To delete a code press the key. NOTE: the Master Code cannot be deleted.

Display reads´HQWHUQHZFRGHµ

Enter the new four digit code, a dual tone will be heard on acceptance and display will read

´UHHQWHU FRGHµ  enter the same four digit code again to confirm. On acceptance the dual

tone will again be heard and the keypad will go back into ‘Day Mode’. If the code was

entered incorrect a single bleep will be heard and ´LQYDOLGFRGHµ will be displayed.

Tabla de contenidos

Otros manuales de Panel de control de Pyronix

Pyronix

Pyronix STERLING 10 Manual de usuario

Pyronix

Pyronix Matrix 832 Manual de usuario

Pyronix

Pyronix Matrix 424 Manual de usuario

Pyronix

Pyronix Conqueror Manual de usuario

Pyronix

Pyronix STERLING 10 Manual de usuario

Pyronix

Pyronix Castle EURO 46S Manual de instalación y funcionamiento

Pyronix

Pyronix Castle EURO 162 Manual de instalación y funcionamiento

Pyronix

Pyronix Matrix Series Manual de usuario

Pyronix

Pyronix EURO 46 APP Manual de usuario

Pyronix

Pyronix Matrix 6/816 Manual de usuario

Pyronix

Pyronix MATRIX 6 Manual de usuario

Pyronix

Pyronix Conqueror Manual de usuario

Pyronix

Pyronix ATLAS8PLUS Guía de mantenimiento y servicio

Pyronix

Pyronix Castle EURO 46 Series Manual del propietario

Pyronix

Pyronix Enforcer 32WE Manual de usuario

Pyronix

Pyronix MATRIX 6 Manual de usuario

Pyronix

Pyronix OCTAGON II Manual de usuario

Pyronix

Pyronix Enforcer X Series Manual de usuario

Pyronix

Pyronix STERLING 10 Manual de usuario

Pyronix

Pyronix MATRIX 6 Manual de usuario

Pyronix

Pyronix PCX 46 APP Manual de instalación y funcionamiento

Pyronix

Pyronix STERLING 10 Manual de usuario

Pyronix

Pyronix STERLING 10 Manual de usuario

Pyronix

Pyronix PCX 46 APP Manual de usuario

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas