Pyle PLTVD7P Manual de usuario
OWNER’S MANUAL
Mobile Video System
• Digital Audio Out-Coaxial
• DVD Player With TV Tuner
• Multi Color TFT Monitor
• Multi-subtitle Languages Function
• Multi-audio Languages Function
• Multi-angle Function
• Parental Control
• Remote Control
PLTVD7P
2
FEATURES
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
• Supplied remote handles multi-function
software (multi-language audio-
track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
Built In TV Tuner
• PLL Tuning System
•I
2C Bus Control
USE THIS PRODUCT
SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30°.
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
The Player......................................................................................................6
Installation .....................................................................................................8
Open/Close the Monitor and Angle Adjustment........................................9
Electric Connection ....................................................................................10
Remote Control...........................................................................................11
Preparing the Remote Control..............................................................................13
Loading a DVD/VCD/CD Disc...............................................................................13
Ejecting a Disc ......................................................................................................13
Basic Operation ..........................................................................................14
On-Screen Display Function.................................................................................16
Multi-audio Language Function............................................................................17
Menu Function......................................................................................................17
Title Menu Function ..............................................................................................17
Multi-subtitle Language Function .........................................................................17
Multi-angle Function .............................................................................................17
MP3 Disc Play.......................................................................................................18
TV Operation.........................................................................................................18
Setup ............................................................................................................19
Initial Setup ...........................................................................................................19
General Setup.......................................................................................................19
Speaker Setup ......................................................................................................21
Audio Setup ..........................................................................................................21
Preferences Setup ................................................................................................22
Defaults Table .......................................................................................................24
Specifications..............................................................................................25
3
CONTENTS
4
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
•TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
•TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
•THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision Corporation.
Reverse engineering or disassembly is
prohibited.
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
SAFETY INFORMATION
DISC NOTES
5
Disc formats supported by this player
DVD
12 cm disc
(Single-sided disc only)
VIDEO CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Discs which cannot be played with this
player
•DVD-ROM
•DVD-R/DVD-RAM
•CDV
•CD-G
Handling and Cleaning
•Dirt, dust, scratches and warping disc
will cause misoperation.
•Do not place stickers or make
scratches on discs.
•Do not warp discs.
•A disc should always be kept in its
case when not in use to prevent from
damaging.
•Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Preparing New Discs with Rough Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots
on inside edge
Ball point pen
or pencil
Rough spots on
outside edge
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge
6
THE PLAYER
1. Power ( )
2 IR (Remote Sensor)
3. EJECT ( )
4. Disc Slot
5. PLAY/PAUSE
6. STOP ( )
7. PREV ( )
8. NEXT ( )
9. VIDEO INPUT
10. AUDIO INPUT
11. MODE
12. Indicator Light for DVD
13. Indicator Light for TV
14. Indicator Light for AV
15. SPEAKER ON/VOLUME
16. MULTI COLOR TFT MONITOR
17. COLOR Adjustment knob
18. BRIGHTNESS Adjustment knob
19. CONTRAST Adjustment knob
FRONT VIEW
5-INCH MULTI COLOR TFT MONITOR
4
1
14
11
7
12
13
15 2
10
9
5
3
6
8
19
18
17
16
7-INCH MULTI COLOR TFT MONITOR
7
THE PLAYER
20.
This jack is for earphone. You can connect an earphone to the jack to receive
sound signal.
21. VOLUME
Slide the knob to change the volume of the earphone.
22. Antenna
This antenna can receive TV signal.
BACK VIEW
23. DC 12V Power Input Socket
24. DC 12V Power Output Socket
25. Remote Control Socket
26. Digital Audio Out - Coaxial
27. AUDIO/VIDEO OUTPUT
28. Diversity Antenna Input
29. OPEN Button (Press to eject the
screen display from the base at a
little angle)
SIDE VIEW
20
21
22
29
23 24 25 26 27 28
8
INSTALLATION
1. Remove the two transport screws
Press OPEN button on the back of the unit to eject the screen display from the
base at a little angle then turn the monitor upward to display the two screw. And
then use the screwdriver to remove the two screws.
2. Push the monitor back into the monitor base unit until the screen engages with
OPEN button. Then attach the brackets on both sides of unit with screws (M4x5),
last install the unit with screws (M5x25). When fix the unit, you can slide the
screw (M5x25) to left side or right side to meet your needed position. In the figure
below, select two holes among the positions that marked 1, 2, 3 and 4 to fix the
bracket.
Remove the transport scerws
Open Button
SCREW
M5 x 25
SCREW
M4 x 5
SCREW
M4 x 5
9
OPEN/CLOSE THE MONITOR AND ANGLE ADJUSTMENT
Opening the monitor
Press the OPEN button on the back of the unit to eject the screen display from the
base at a little angle. Then you can easily turn the monitor upward.
Adjusting the angle of the monitor
Rotate the monitor counter-clockwise to let the front view of the monitor appear. Then
you can also adjust the monitor left and right from the central viewing position at a
certain angle range. Don’t rotate the monitor forcibly to avoid mechanical damage.
Note: When the monitor is in upright position to the base, you can adjust the monitor
left or right. Otherwise, the monitor may scrape the base surface when rotated.
Closing the Monitor
Rotate the monitor left and let the back of the monitor upward, then return the monitor
to the central viewing position. Then push the monitor back into the monitor base unit
until the screen engages with OPEN button.
OPEN BUTTON
10
ELECTRIC CONNECTION
AC/DC
ADAPTOR
(OPTIONAL)
YELLOW
VIDEO OUT
RED
AUDIO R OUT
WHITE
AUDIO L OUT
DIVERSITY ANTENNA INPUT
CIGARETTE LIGHTER
REMOTE CONTROL RECEIVER
(OPTIONAL)
DC 12V
INPUT OUTPUT
REMOTE
AUDIO/VIDEO
OUTPUT
DIVERSITY ANTENNA
INPUT
DIGITAL AUDIO
Tabla de contenidos
Otros manuales de Sistema de vídeo para coche de Pyle
Pyle
Pyle PLDVD168 Manual de usuario
Pyle
Pyle PLDVD134F Manual de usuario
Pyle
Pyle PLVW65M Manual de usuario
Pyle
Pyle View PLDVD7M Manual de usuario
Pyle
Pyle PLVIN65 Manual de usuario
Pyle
Pyle PLDVD-96 Manual de usuario
Pyle
Pyle PLVIN60 Manual de usuario
Pyle
Pyle PYLE View Series PLHR4M Manual de usuario
Pyle
Pyle PLWV104 2R Manual de usuario
Pyle
Pyle View PLDVD10M Manual de usuario
Pyle
Pyle PLRD106 Manual de usuario
Pyle
Pyle PLHR78W Manual de usuario
Pyle
Pyle PLDVD65IN Manual de usuario
Pyle
Pyle PLRD145 Manual de usuario
Pyle
Pyle PLKITCAP4 Manual de usuario
Pyle
Pyle PLINTBL10 Manual de usuario
Pyle
Pyle PYLE View Series PLTFT72 Manual de usuario
Pyle
Pyle PLD52MU Manual de usuario
Pyle
Pyle PLDNAND623 Manual de usuario
Pyle
Pyle PLPK65TVD Manual de usuario
