Pyle PLTS73UB Manual de usuario
with Multimedia Player, BT Wireless Streaming,
Hands-Free Talking, Motorized Fold-Out 7’’Touchscreen Display,
MP4/MP3/USB/SD/AM/FM Radio, Single DIN
PLTS73UB
CarStereoVideoReceiver
www.PyleUSA.com
2
Download the “Phonelink” Apk
from Google Play Store
CONTENTS
Safety Information
Precautions
Installation
Control Panel
Remote Control
Set Up Operations
Radio Operations
USB/SD Card Device Operations
Wireless BT Operations
Android Phone Link Operations
Features
Technical Specs
3
3
4
6
8
10
13
14
16
17
19
20
www.PyleUSA.com
3
To establish a safe level:
Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
• Once you have established a comfortable sound level, set the dial and leave it
there.
Precautions:
1. To reduce the risk of fire, electric shock, and interference, do not attempt to repair
this product yourself. Refer all servicing to a qualified technician.
2. Do not switch ON this digital video player for a long time when the vehicle’s
3. Do not apply strong mechanical stress like drop, shock or any force to the TFT
LCD. Do not hard hit, press or rub the TFT LCD display surface. If the display
surface is dirty, please wipe the surface softly with cotton swab or clean cloth.
4. Never place any foreign objects into the openings of this product such as USB
port, SD slot, AUX IN jack. Otherwise you might damage the slots and
connectors.
5. Do not throw the battery cell of remote control into fire as this may cause an
explosion. Keep battery cells out of reach of children.
IMPORTANT:
• Do not operate this digital video player while the vehicle is moving.
• This is a safety feature to prevent driver distraction.
• It’s illegal in most country for the driver to view video while the vehicle is
moving.
• The digital video functions will only be operated when vehicle is parked
and the parking brake is engaged.
www.PyleUSA.com
4
INSTALLATION:
Before Installation:
• We recommend you to let a professional technician install the unit in the vehicle.
• Disconnect negative battery terminal of vehicle.
Installation Process:
• Carefully remove the existing head unit.
• Before finally installing this product, connect wiring harness temporarily and
make sure it’s all connected up properly and test the head unit if it can work
properly. (Consult a qualified technician if you unsure)
• Lift the left or right top corner of the plastic outer trim ring then pull it o to
remove it.
• Insert the two bracket keys into the left and right side of the chassis to separate
the chassis from the housing.
• Insert the mounting sleeve into the dashboard and bend the mounting tabs out
with a screwdriver. Make sure that the lock lever is flush with the mounting
sleeve and it dose not project beyond it.
• Slide the digital video player carefully into the already fixated mounting sleeve
till it clicks into place.
• Use a metal strap to fix the rear part of the chassis.
• Connect wires as illustrated in the“wiring diagram”.
• Install the plastic outer trim ring.
Note: If you need other screws to fix other terminal, please buy from your dealer
according to the drilling of holes size.
Hex Bolt
Spring Washer
Plain Washer
Tapping Screw
Screwdriver
Tabs
Hex Nut
Dash Board
Key Plate
Key Plate
Plastic
Trim Out
Metal Mounting
Strap
Console
Slide Bracket Housing
www.PyleUSA.com
5
Wiring Connections:
Note: the ground connection cable (parking brake B-) must be connected in order
for pictures to be played back to the monitor. If the cable has not been correctly
connected, warning message appears on the monitor.
RED
YELLOW
BLACK
BLUE
ACC
B+
GROUND
POWER ANTENNA
FRONT LEFT
CHANNEL SPEAKER
REAR LEFT
CHANNEL SPEAKER
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
SWC - GND
SWC - 1
SWC - 2
REVERSE (+)
PARKING BRAKE (B-)
ILLUMINATION (+)
FRONT RIGHT
CHANNEL SPEAKER
REAR RIGHT
CHANNEL SPEAKER
ORANGE
BROWN
BROWN / WHITE
BLACK
PINK
ORANGE / BLACK
GRAY
GRAY / BLACK
VIOLET
VIOLET/BLACK
www.PyleUSA.com
6
Control Panel Buttons:
1. OPEN/ BUTTON
• Briefly press this button to slide the monitor out of slot.
• Repeatedly press this button to tilt up and down the monitor.
• Press and hold this button to slide the monitor inside of the slot.
2. /MODE BUTTON
ON
In power on mode, short press it repeatedly to select one mode of the RADIO,
USB, SD Card, Phonelink, Bluetooth and AUX IN(AV IN).
3.Volume KNOB / SELECT BUTTON
Rotate the VOL knob to increase or decrease the volume level.
Press the SEL button to turn to audio settings: Volume, Dimmer, Balance, Fader,
4. Handsfree Microphone
Uses the bluetooth handsfree system to receive your voice when calling.
5. IR REMOTE SENSOR
6. BAND, Make a Call, Reject and End Call ( )
In radio model, press BAND to select between FM1, FM2, FM3, AM1 and AM2
bands.
In BT mode, press to reject an income call or end a call.
7.Tune Previous/ Skip Previous track,
In Radio mode, press to scan strong singal radio station downward step by step.
Press and hold it to tune radio frequency downward one step at a time.
In USB/SD card/BT music playback, press this button to skip previous track.
Press and hold to fast backward playback.
www.PyleUSA.com
7
8.Tune Next/ Skip Next track
In Radio mode, press it to scan strong singal radio station upward step by step.
Press and hold it to tune radio frequency upward one step at a time.
In USB/Micro SD card/BT music playback, press to skip next track.
Press and hold to fast forward playback.
9. MUTE ON/OFF,
In power on mode, press the MUTE
10. Receive and Redial Last Call ( )
In BT phone mode, press the button to make a call / receive a call / redial
the last dialed phone number.
11. (PLAY/PAUSE) /CH 1-6 (PRESET RADIO STATION)
In USB/SD card/BT music playback mode
Press this button to pause playback, touch again to resume playback.
In Radio Mode
Press repeatedly to preset radio station. With this system a total of 30 stations
can be stored in the memory. Each band store up to six preset stations.
The stations might be FM1, FM2, FM3, AM1 (MW1) and AM2 (MW2) band.
To retrieve a preset station
Press repeatedly this button to recall the preset stations which had been stored
in the memory in advance.
12. USB PORT
Open the cover for USB device use.
1 Amp charging for most iPhone / andriod mobile phone.
13. Micro SD Card Slot
This Micro SD card slot is designed for media playback from Micro SD card.
14. AUXILIARY INPUT JACK
Insert an external device to this 3.5mm auxiliary jack in order to have audio
output of the device through the unit.
15. RESET SYSTEM
The RESET button is used to reset all paramenters to factory default setttings.
This function may be used when the LCD does not display normally or sound is
distorted, or when any of controls are disabled. Gently press the RESET button
to reset your system with a thin object with a pointed end.
www.PyleUSA.com
8
REMOTE CONTROLS:
1. OPEN /
Briefly press this button to slide the monitor out of slot.
Repeatedly press this button to tilt up and down the monitor.
Press and hold this button to slide the monitor inside of the slot.
2. Power ON/OFF, MODE
Press it to turn the unit ON , press and hold to turn the unit OFF.
Phonelink, Bluetooth and AUX IN(AV IN).
3 & 7. /
In USB/SD Playback mode, press each one to fast forward and fast backward
playback with X2, X4, X8, X16 speed.
In Radio mode, press each one to select the next or the previous preset station.
4. AS /
In Radio mode, press and hold AS for more than 2 seconds to store 18 FM stations
stored in memories in each band.
Press the button to make a call / receive a call / redial the last dialed phone
number.
5. (Play/Pause)
In USB/SD/BT music playback mode, press to pause playback. Press again to
start where playback stopped.
6 & 17. / .
In USB/SD/BT music playback, press both buttons to skip next or previous track.
In Radio mode, press each one to seek tuning down or up.
Tap and hold each one to enter manual scan mode, then short tap this button to
move radio frequency down or up one step at a time.
8.TITLE: Not Available
www.PyleUSA.com
9
9. RPT (Repeat playback) / 2
In USB/SD playback mode, press and hold the RPT button to
repeat playback modes: Repeat Track, Repeat All, Repeat Cancell.
In radio mode, press to store or recall the preset station 2.
10. DISP / 1
In video playing mode, press and hold the DISP to show information such as
Title number, Chapter number, Track number, elapsed time, remain time etc..
In radio mode, press to store or recall the preset station 1.
11. AUDIO / 5
In video playing mode, press and hold the AUDIO button repeatedly to switch
the language of audio if the video is recorded with multi-languages.
In radio mode, press to store or recall the preset station 5.
12. MENU / 4
MENU: Not Available
In radio mode, press to store or recall the preset station 4.
13 & 21.VOL+/VOL
Use both controls to adjust the volume level.
14. SEL
Press to turn to
Pop/Classic/Rock/Jazz.
15. MUTE
In power on mode, press the MUTE
16. BAND /
Press the BAND button to select between FM1, FM2, FM3, AM1 and AM2 bands.
In BT mode, press to reject an income call or end a call.
18. EQ
wish to use.
19. RDM / 3
In USB/SD Playback mode, press and hold the RDM button to play tracks in
random order, press again to cancel the RDM function.
In radio mode, press to store or recall the preset station 3.
20. SUB-T/6
SUB-T: Not Available
In radio mode, press to store or recall the preset station 6.
www.PyleUSA.com
10
Setup Operations:
Main Menu:
In each mode, touch the icon to enter the main menu as below image. In the
main menu screen, press the desired icon to enter each of the following settings :
Radio, Bluetooth(Phone & Music), USB, SD Card, Phonelink, AUX In(AV In), F. CAM
(Front View Camera), Setup.
In main menu, touch the icon to enter the setup menu, as below images.
Then user can set up or adjust the general settings for this multimedia player.
A. System: Logo Setting, Radio Area, OSD Language, Screensaver Mode, Beep,
Parke Control, Camera Mirror Image, Auto Front Camera On/O, SWC, RGB LED
Setting, Time Setting, Default.
• Logo Setting: To set a logo as the splash screen for this multimedia player.
• Radio Area: To choose the radio area: EUROPE, Northen America, South America,
Russia, Japan, Asia.
• OSD Language: English, Chinese, Arabic, Greek, Thai, Hebrew, Turkish, Russian,
French, German, Spanish, Persian, Indonesian, Portuguese, Italian.
• Screensaver Mode: Enables or Disables the screensaver of this multimedia player.
• Parke control: Enables or Disables the brake detection.
This safety feature to prevent driver distraction. We recommend user to enable
this brake detection function. When enable this function, user were forbidden to
watch video from this unit while this system is not detect the brake signal of the
parking brake.
• Camera Mirror Image: Enables or Disables the camera mirror image.
• Auto Front Camera: Allows you to preset the duration of the front view camera
Brightness
Control
Time
Tabla de contenidos
Otros manuales de Receptor de coche de Pyle
Pyle
Pyle PLCD48MP3 Manual de usuario
Pyle
Pyle PLCD45MP3 Manual de usuario
Pyle
Pyle PLMRKT14BK Manual de usuario
Pyle
Pyle PLCD7MRKT Manual de usuario
Pyle
Pyle PLD53MUT Manual de usuario
Pyle
Pyle PL75DL Manual de usuario
Pyle
Pyle PLDVIN7 Manual de usuario
Pyle
Pyle PLCD79MP Manual de usuario
Pyle
Pyle PLCD34 Manual de usuario
Pyle
Pyle PLCD32 Manual de usuario
Pyle
Pyle PLR14MPF Manual de usuario
Pyle
Pyle PLINDVTB10 Manual de usuario
Pyle
Pyle PLCDUSMP74 Manual de usuario
Pyle
Pyle PLIDF7 Manual de usuario
Pyle
Pyle PLD-189 Manual de usuario
Pyle
Pyle PLD-136 Guía de inicio rápido
Pyle
Pyle PL78DLB Manual de usuario
Pyle
Pyle PLINDVTB7 Manual de usuario
Pyle
Pyle PLCD29 Manual de usuario
Pyle
Pyle PLCD69MP Manual de usuario
