Pyle PLDVD92 Manual de usuario

OWNER’S MANUAL

Mobile Video System

• Digital Audio Out-Coaxial

• DVD Player

• Vacuum Fluorescent Display

• Multi-subtitle Languages Function

• Multi-audio Languages Function

• Multi-angle Function

• Parental Control

• Remote Control

PLDVD92

FEATURES

Compatible with PAL DVD (Video

CD) and NTSC DVD (Video CD)

This player can play discs recorded in

either PAL or NTSC format.

• A single LSI chip now integrates all

major DVD playback circuit functions

including MPEG2 decoder, video D/A

converter, and audio decoders.

• L/R stereo analog audio outputs for

connection to existing head unit aux

inputs. Video output is composite

video.

• Supplied remote handles

multi-function software (multi-language

audio-track/subtitle, multi-angle, multi-

story, etc.), plus all basic functions.

USE THIS PRODUCT SAFELY

When Driving

Keep the volume level low enough to be

aware of road and traffic conditions.

When Car Washing

Do not expose the product to water or

excessive moisture. This could cause

electrical shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce

very high temperatures inside your

vehicle. Give the interior a chance to

cool down before starting playback.

Use the Proper Power Supply

This product is designed to operate with

a 12 volt DC, negative ground battery

system (the regular system in a North

American car).

Protect the Disc Mechanism

Avoid inserting any foreign objects into

the slot of this player.

Failure to observe this may cause

malfunction due to the precise

mechanism of this unit.

Use Authorized Service Centres

Do not attempt to disassemble or adjust

this precision product. Please refer to

the Service Centre list included with this

product for service assistance.

For Installation

The unit should be installed in a

horizontal position with the front end up

at a convenient angle, but not more than

30°.

CONTENTS

Safety Information ........................................................................................4

Disc Notes .....................................................................................................5

The Player......................................................................................................6

Installation .....................................................................................................7

Mechanical Installation ...........................................................................................7

Electrical Connection..............................................................................................7

Remote Control.............................................................................................8

Preparing the Remote Control..............................................................................10

Loading a DVD/VCD/CD Disc...............................................................................10

Ejecting a Disc ......................................................................................................10

Basic Operation ..........................................................................................11

On-Screen Display Function.................................................................................13

Multi-audio Language Function............................................................................14

Menu Function......................................................................................................14

Title Menu Function ..............................................................................................14

Multi-subtitle Language Function .........................................................................14

Multi-angle Function .............................................................................................14

MP3 Disc Play.......................................................................................................15

Setup ............................................................................................................16

Initial Setup ...........................................................................................................16

General Setup.......................................................................................................16

Speaker Setup ......................................................................................................18

Audio Setup ..........................................................................................................18

Preferences Setup ................................................................................................19

Defaults Table .......................................................................................................21

Specifications..............................................................................................22

CAUTION:

MOBILE DVD PLAYER IS A CLASS I

LASER PRODUCT. HOWEVER THIS

MOBILE DVD PLAYER USES A

VISIBLE/INVISIBLE LASER BEAM

WHICH COULD CAUSE HAZARDOUS

RADIATION EXPOSURE IF DIRECTED.

BE SURE TO OPERATE THE MOBILE

DVD PLAYER CORRECTLY AS

INSTRUCTED.

USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND - DO NOT

REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

WARNING:

•TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR

MOISTURE.

•TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, AND ANNOYING

INTERFERENCE, USE ONLY THE

RECOMMENDED ACCESSORIES.

•THIS DEVICE IS INTENDED FOR

CONTINUOUS OPERATION.

This product incorporates copyright

protection technology that is protected

by method claims of certain U.S. patents

and other intellectual property rights

owned by Macrovision Corporation and

other rights owners. Use of this

authorized by Macrovision Corporation,

and is intended for home and other

limited viewing uses only unless

otherwise authorized by Macrovision

Corporation. Reverse engineering or

disassembly is prohibited.

SAFETY INFORMATION

Region Management Information

Region Management Information:

This Mobile DVD Player is designed and

manufactured to respond to the Region

Management Information that is recorded

on a DVD disc. If the Region number

described on the DVD disc does not

correspond to the Region number of this

Mobile DVD Player, this Mobile DVD

Player cannot play this disc.

DISC NOTES

Disc formats supported by this player

DVD

12 cm disc

(Single-sided disc only)

Video CD

12 cm disc

MP3

12 cm disc

Discs which cannot be played with this

player

•DVD-ROM

•DVD-R/DVD-RAM

•CDV

•CD-G

Handling and Cleaning

•Dirt, dust, scratches and warping disc

will cause misoperation.

•Do not place stickers or make

scratches on discs.

•Do not warp discs.

•A disc should always be kept in its

case when not in use to prevent from

damaging.

•Do not place discs in the following

places:

1. Direct sunlight

2. Dirty, dusty and damp areas

3. Near car heaters

4. On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface.

If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing)

alcohol. Never use solvents such as

benzine, thinner or conventional record

cleaners as they may mar the surface of

the disc.

Note:

A disc may become somewhat scratched

(although not enough to make it

unusable) depending on your handle it

and conditions in the usage environment.

Note these scratches are not an

indication of any problem with the player.

Preparing New Discs with Rough

Spots

A new disc may have rough edges on its

inside and outside edges. If a disc with

rough edges is used, the proper setting

will not be performed and the player will

not play the disc. Therefore, remove the

rough edges in advance by using a ball

point pen or pencil as shown on the right.

To remove the rough edges, press the

side of the pen or pencil against the

inside and outside edges of the disc.

Rough spots

on inside edge

Ball point pen

or pencil

Rough spots on

outside edge

Label side up

Do not touch

the underside

of the disc

Do not bend

Wipe the disc from center

toward the outside edge

THE PLAYER

1. Stereo Audio Out-Left 5. Digital Audio Out - Coaxial

2. Stereo Audio Out-Right 6. DC 12V Power Input Socket

3. Video Out 1 7. DC 12V Power Output Socket

4. Video Out 2 8. Remote Control Socket

1. Power ON/OFF ( ) 10. PAUSE ( )

2. Power Indicator 11. VFD Display

3. Tray OPEN/CLOSE ( ) A. Operating status indicator (Play/Pause)

4. Disc Loading Tray B. Title number indicator

5. Remote Sensor C. Chapter number indicator

6. PLAY ( ) D. Disc rotation/speed/direction indicator

7. STOP ( ) E. DVD indicator

8. Skip Next Chapter ( ) F. Playing time indicator

9. Skip Previous Chapter

( ) 12. Reset

Front View

DVD

BA C D FE

1211

3 2 1

7 89 10

Back View

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

PRODUTO LASER CLASSE 1

DIGITAL

AUDIO OUT

AUDIO OUT VIDEO OUT

DC 12V

IN OUT SERIAL NO REMOTE

6 8 5 1 2 4 37

INSTALLATION

Install your DVD player on a stable flat surface. There must be sufficient space in

front of the player for the drawer to be opened. Don’t expose your player to extremes

of temperature or humidity. Avoid standing it on a hot surface such as on top of other

hot running equipment and ensure that there is adequate ventilation to the player.

MECHANICAL INSTALLATION

Install step showing on as following figure. You can use screws or magic tapes to fix

your unit.

ELECTRICAL CONNECTION

1. DIRECT CONNECT WITH A TV

Only connect the Audio cable and Video

cable to your TV. Show on as Fig. 1.

Fix the remote control receiver with magic

tape on the proper position and it can

“see”the remote control.

2. HOME THEATRE CONNECTION

Connect the video socket on the DVD to your TV. Do not connect the L-R Audio

socket to the TV, or if the L-R connections are made, you need to set the TV volume

control to zero. Show on as Fig. 2. Connect the digital audio out socket on the

DVD to the digital input socket of your 5.1 channel receiver/amplifier.

Hexagonal bolt

(M6 x 20) 4pcs

Tapping screw

(M5x12) 4pcs

Bracket 2pcs

Sponge 2pcs

Step 1 (Method A) Step 3

Tighten the screw

4pcs

Step 2Step 1 (Method B)

Magic Tape

(3 pcs)

DVD

Player

Protective Pad

Fig. 1

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

PRODUTO LASER CLASSE 1

DIGITAL

AUDIO OUT

AUDIO OUT VIDEO OUT

DC 12V

IN OUT

SERIAL NO

REMOTE

DVD PLAYER

A/V CABLE

Remote control receiver

Magic Tape

Cigarette Lighter

Fig. 2

5. CH.RECEIVER

DIGITAL AUDIO

Front

Speaker

(Left)

Front

Speaker

(Right)

Centre

Speaker

Sub woofer

Rear Speaker

(Right Surround)

Rear Speaker

(Left Surround)

CLASS 1 LASER PRODUCT

APPAREILA LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

PRODUTO LASER CLASSE 1

DIGITAL

AUDIO OUT

AUDIO OUT VIDEO OUT

DC 12V

IN OUT

SERIAL NO

REMOTE

DVD PLAYER

A/V CABLE

Remote control receiver

Magic Tape

Cigarette Lighter

REMOTE CONTROL

2421

2726

3130

REMOTE CONTROL

1. POWER Press POWER to turn the unit ON or OFF.

2. EJECT Press to eject the disc.

3. MUTE Press to mute the sound.

4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language

DVD disc.

5. ANGLE Changing of the view angle on multi-angle DVD disc.

6. DISPLAY Display statistical disc information during playback.

7. PBC Changing between PBC ON and PBC OFF on the VCD disc.

8. SETUP Display the SETUP menu.

9. PAL/NTSC Switch between PAL mode and NTSC mode.

10. AUDIO Changing of the AUDIO soundtrack on multi-audio soundtrack

DVD disc. Changing of the sound mode of the VCD/CD disc.

11. TITLE Display the TITLE menu that is stored in DVD disc.

12. MENU Display the root menu that is stored on the DVD disc

13. / , / In case of MENU mode, / , / , buttons served as cursor

buttons to select item left/right, ahead/back.

14. ENTER Confirm the Track/Chapter selected with the numeric buttons or

selected with the cursor buttons on screen.

15. / Changing for slow forward/reverse playback motion.

16. Press to play the disc.

17. / Press to search forward rapidly & to search reverse rapidly.

18. / Press to skip to the next track & press to skip back one

track.

19. Press it to stop playback.

20. Press it to pause playback.

21. 0 - 9 Numeric buttons

22. 10+ Digital selecting button, cooperatively used with numeric buttons.

23. CLEAR When you input a number in error, press the button to clear it.

24. VOLUME+/- Press VOLUME+/- button to increase or decrease the volume

level.

25. ZOOM Allows the picture to be increased or decreased in size.

26. RESUME When in stop mode, press the button, the play can be resumed

from the stop point.

27. GOTO Disc search button, cooperatively used with numeric buttons.

28. STEP Press to stop at the next picture.

29. RANDOM Allows the track played in random order.

30. PROGRAM Allows the track played in the order you programmed.

31. REPEAT Switch the Repeat mode of discs.

32. A-B A-B repeat allows a passage to be repeated continuously.

REMOTE CONTROL

Preparing the Remote Control

Inserting the Batteries

1. Open the battery compartment cover.

2. Insert the new batteries. Make sure

that the positive and negative

terminals of the batteries are oriented

indicated.

3. Close the cover

Battery: Two AAA size battery.

Using the Remote Control

Face the remote control towards the

player front face IR mark (remote control

signal receiver).

Operation angle: About ±30 degree in

each the direction of the front of the IR

mark.

To prevent damage to the unit, be sure

to follow the connection diagram

(page 7).

Loading a DVD/VCD/CD Disc

1. Turn the ignition on to the accessory

position and the STAND BY indicator

(1) will display red.

2. Press the POWER button (2). The

STAND BY indicator will go out.

3. Press button on the front panel (3)

or on the remote control to open the

disc loading tray (4), then place the

disc with printed side facing up on the

tray.

4. Close the tray by pressing button on

the front panel or on the remote

control, and the player will start

playback automatically.

Ejecting a Disc

Open the disc loading tray by pressing

button on the front panel or on the

remote control, and then the disc will

stop playing automatically. Then you can

remove the disc and close the tray.

4 213

Otros manuales para PLDVD92

Tabla de contenidos

Otros manuales de Receptor de coche de Pyle

Manuales populares de Receptor de coche de otras marcas

Motorola

Motorola VWA63 Manual de usuario

Nextar

Nextar D3201 Manual de usuario

Alpine

Alpine CDE-163BT Manual de usuario

Pioneer

Pioneer DEH-P645R Manual de usuario

Axxera

Axxera XDMA7600 Instrucciones de funcionamiento

XM OnyX Manual de usuario

Sound Storm

Sound Storm STM93R Manual de usuario

Soundstream

Soundstream VIR-5000 Manual de usuario

Avson

Avson MKT Platform Manual de usuario

Sony

Sony MEX-1HD - Audio Library System Manual de usuario

Pioneer

Pioneer DVH-P500UB Manual de usuario

JVC

JVC KD-AHD69 Manual de usuario

Blaupunkt

Blaupunkt SANTIAGO CR 87 Manual de usuario

Sony

Sony CDX-4160 - Cd Receiver Manual de usuario

XFIRE AUDIO

XFIRE AUDIO BMW42S Manual de usuario

VDO

VDO CD 2253 Manual de usuario

Volvo

Volvo 13 84 580 Manual de usuario

ZENEC

ZENEC ZE-160DVD Manual de usuario