Pyle Pro PADH1079 Manual de usuario











  



  



  



Introduction

Thank you for purchasing this Pyle Pro PADH series speaker The

loudspeaker is designed to provide you years of high performance in any

application that you require. Please read this manual carefully to fully

maximize the performance of the speaker.

Maintenance and Safety

• Do not expose the speaker to moisture.

• Avoid hot and cold temperature extremes.

• Clean using a damp cloth. Make sure that no moisture contacts the

drivers. You can use a hand vacuum to clean the carpet.

• Do not attempt to service the unit. Refer service to a certified Pyle Pro

technician.

• This loudspeaker is capable of producing extremely high SPL levels.

Use earplugs when necessary.

Features

The PADH series features high-level

drivers and rugged components and is

designed for high-performance applications.

The cabinet features heavy-duty

construction with reinforced corners. It is

covered with a black-carpeted finish that

will stand up to years of tour duty. The

integrated handles have been carefully

selected for their ergonomic design and

durability.

All models are loaded with a

premium Kapton voice coil woofer and

exhibit excellent bass response. The

compression driver provides warm midrange

reproduction and crystal clear highs.

The integrated passive crossover network is assembled using quality

components and efficiently directs the frequencies to the proper drivers.



There is a flush mounted 35mm speaker stand

adapter on the bottom side of the cabinet.

Connections

Your PADH series

speaker has an extremely

flexible connection panel.

There are two Speakon jacks

as well as two ¼” jacks. You

can also hookup your speaker

cabinet using the “Quick

Connect” speaker terminals,

which accommodate either

wire leads or a banana plug.

The jacks are wired in

parallel, which allows you to

daisy chain additional

speakers. Thus you can use one amplifier channel to power multiple

speakers.

Make certain that the wires you are using are at least 12 gauge

unshielded speaker cable (the lower the number, the thicker the wire). Do

not use shielded “instrument” cables.

Hooking speakers up in parallel decreases the overall

impedance, placing a greater load on the amplifier. Check your

amplifier’s specifications to ensure that you are not overloading

the channel.

CAUTION: DO NOT USE MORE THAN ONE JACK AS AN

AMPLIFIER INPUT. DOING SO WILL DAMAGE THE S PEAKER!

Amplifier Requirements

Check the product specifications (page 5) to see the power handling

for your model. There are a couple of considerations to keep in mind when



choosing an amplifier to drive your PADH series speaker. While it is true

that an amplifier with a higher power rating can damage the drivers, under-

powering can be even more dangerous. When an amplifier is overdriven and

starts distorting, it generates transient frequencies that are much louder than

the program material. These wayward frequencies could damage your

speaker. A proper match is an amplifier which could drive the speaker up to

the cabinet’s RMS rating, without exceeding the amplifier’s own RMS level.

Operation

When powering on your equipment, make sure the volume level on

the amplifier is turned all the way down. This is to avoid the “popping”

noise, which could damage your speaker.

The placement of speakers can be a bit tricky. Besides for the

practical considerations, there are acoustic issues as well. Avoid placing the

speaker in a corner, as this will cause the low frequencies to sound “muddy”.

Similarly, but to a lesser degree, placing the speaker directly against the wall

will exaggerate the low frequencies. You should therefore try to place your

speaker so that it is a few feet away from the wall.

High frequencies are unidirectional while low frequencies are omni

directional. Being that this is a full range enclosure, it is important that the

speaker be placed so that the high frequencies reach the intended listeners

properly. Make certain that no person or object could come to interrupt the

line-of-site between the loudspeaker and the audience.

When using more than one loudspeaker, you have to account for

phase alignment. When the speakers are close together this is not usually an

issue. However, when they are far apart, the sound from one speaker may

reach the ear a fraction of a second before the other. This will cause certain

frequencies to cancel out, resulting in a hollow sound. To avoid this, you

may have to use a delay processor to align the sound from the speakers.



Troubleshooting

No Sound:

Check connections

Try a different speaker cable

Check levels on amplifier

Confirm amplifier is getting a signal (check signal LED, or use

headphone output)

Intermittent Output:

Check connections

Try a different speaker cable

Weak Bass:

Check the polarity of the speaker connection. It may be reversed.

Listen with headphones to confirm the amplifier is being sent a good

signal.

Distorted Sound:

Check if the amplifier is overdriven. If it is, you will have to turn the

level down.

Make sure you are not exceeding the RMS rating of your speaker.

Specifications

  



   



!" # Ω $



%

&$'()*

(+,

-#



.+/)+

'

!



01231'4



01



.11



*56

3"

7″3"

89#+

:;6"



8Ω



< .0+

$< 3+

'< *+

3.0=

&$' 1)*

1+

,

-#



>+/ 1+



'

!



>1231'4



301



011



*)6

3"

7″3"

89#+

:;6"



8Ω

< 030+



$< 3)0+



'<31+

3(=

&$' 3)*

3+

,

-#



>+/ 3+



'

!



>1231'4



.11



511



*)6

3"

7″3"

89#+

:;6"



8Ω



< ))0+



$< 5+

'<35+

>>0=

&$' 0)*

0+

,

-#



0+/ 0+



'

!



>1231'4



>11



(11



*(6

3"

7″3"

89#+

:;6"



8Ω



<31+

$< (+

'<.1+

5 =



Parallel Setup

Typical Setup



Recommended Accessories







   

 ! "

"#$





%&'(

)& " 

**





"    + &



  

%&'(

)& "

"" 





Same as above 15ft





%&'()&

"

"*





"    + &



  

  

 )&  ,-.)   &

 /0 -  & 

    .  

1"23









 

 )&  ,-.)   &

 %0 -  & 

    .  

1"23





 4'5'&'(

 "" 

 

 "#$

 





Check out these and other accessories at www.pyleaudio.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de Pyle Pro

Pyle Pro

Pyle Pro PMDJAND10 Manual de usuario

Pyle Pro

Pyle Pro PPHP1290 Manual de usuario

Pyle Pro

Pyle Pro PASC12 Manual de usuario

Pyle Pro

Pyle Pro PYLE PRO PADH1289 Manual de usuario

Pyle Pro

Pyle Pro PAHT4 Manual de usuario

Pyle Pro

Pyle Pro PYLE PRO PK12SBA Manual de usuario

Pyle Pro

Pyle Pro PCMX240I Manual de usuario

Pyle Pro

Pyle Pro PCMX260MB Manual de usuario

Pyle Pro

Pyle Pro PPFR212 Manual de usuario

Pyle Pro

Pyle Pro PMDJAND12 Manual de usuario

Pyle Pro

Pyle Pro PWMDJ88BT Manual de usuario

Pyle Pro

Pyle Pro PWMKRDJ89BT Manual de usuario

Pyle Pro

Pyle Pro PPHP1595 Manual de usuario

Pyle Pro

Pyle Pro PPHP893 Manual de usuario

Pyle Pro

Pyle Pro PPA10 Manual de usuario

Pyle Pro

Pyle Pro PPHP1287 Manual de usuario

Pyle Pro

Pyle Pro PSS1542 Manual de usuario

Pyle Pro

Pyle Pro PBW8S Manual de usuario

Pyle Pro

Pyle Pro PAHT4 Manual de usuario

Pyle Pro

Pyle Pro PWMA-230 Manual de usuario

Pyle Pro

Pyle Pro padh1024a Manual de usuario

Pyle Pro

Pyle Pro PADH21580 Manual de usuario

Pyle Pro

Pyle Pro PPHP1259 Manual de usuario

Pyle Pro

Pyle Pro PSS1522 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario