4Installation & Operation Manual Copyright © Puretec Ltd 2019
Installation Procedure
2. Isolate water supply. Uninstall the connections on the cold water line and connect the
Smart Tee™. Reinstall the previous connection to the tee valve.
3. Connect the pressure limiting MultiValve to the Smart Tee™ with a length of White
Tubing.
as in the instructions for your model in step 5.
5. To install the faucet follow the instructions for your model below.
Z18 Faucet
supplied onto the base of the tap. Insert into the Counter Top or Sink and place the
the tap is in the correct position on the bench. Then place the Olive in the 1/4"
and attach to the tap thread.
Z12 Faucet
1/4" Tube and the Olive Insert into the end of the Tube and attach to the tap thread.
in the tubing.
9. Restore the water supply and check for leaks.
Installation
