Pulsar RS 200 Manual de usuario
Table of Contents
Description
1. Technical Specifications 1
2. Identification Data 3
3. Location of Parts 4
4. Steering cum Ignition lock 5
5. Fuel Tank Cap 6
6. Speedometer Details 7
7. Speedometer Setting 10
8. Control Switches 12
9. Rear seat / Tool kit 14
10. Front Seat / Battery 15
11. Fitment of Front & Rear Seat 16
12. Daily Safety Checks 17
13. How to ride your Bike 18
14. Safe Riding Tips 22
15. Engine Oil 23
16. Wheels - Tube less Tyre 24
17. Battery 25
18. Engine Cooling System / Coolant 26
19. Periodic Maintenance Information 28
20. Brake Fluid 30
21. Periodic Maintenance & Lubrication Chart 31
22. Non Use Maintenance
Notice:
The description and illustration in this booklet
are not to be taken as binding on the
manufacturers. The essential features of the
type described and illustrated herein remaining
unaltered. Bajaj Auto Limited reserves the
right to carry out at any moment without
being obliged to bring this booklet upto-date
& to do modifications on the vehicle, parts or
accessories as may be convenient and
necessary.
Safety and Warning information :
Caution : This indicates that a potential
hazard which could result in vehicle
damage, if advice provided is not
followed.
Warning : This indicates that a potential
hazard or injury to you or other persons &
to the vehicle can happen, if advice
provided is not followed.
Engine :4 Stroke, Single Cyl.
Bore x Stroke :72.0 mm x 49.0 mm
Engine Displacement :199.5 cc
Compression Ratio :11 + 0.5 : 1
Idling Speed :1400 + 100 RPM
Max. Net Power :18 KW at 9750 RPM
Max. Net Torque :18.3 Nm at 8000 RPM
Ignition System :12V ,DC
FI System : Single Point Injection
into manifold - BOSCH
Spark Plug :3 Nos
Spark Plug Gap :0.7 ~ 0.9 mm
Transmission :6 speed constant
mesh
Gear Shifting Pattern :1 Down 5 Up
Engine Lubrication :Pressurized oil supply
Engine Cooling :Liquid cooling
Starting Aid :Electric starter
Front & Rear Brake : Disc Brake
Fuel Tank Capacity
Full :13 liters
Dimensions :
Length :1999 mm
Width : 765 mm
Height :1114 mm
Wheel base :1363 mm
Ground clearance : 157 mm
Tyre Size
Front :100/80-17,52P tubeless
Rear :130/70-17,61P tubeless
Tyre Pressure
2
Front :1.75 kgf/cm (25 PSI)
2
Rear (Solo) :2.00 kgf/cm (28 PSI)
2
Rear (with pillion) :2.25 kgf/cm (32 PSI)
Technical Specifications
1
Side Stand Indicator : LCD
ABS Indicator : LED - Yellow
Rear No. Plate Lamp : LED
Horn : 12V DC
Battery : 12V , 8Ah VRLA
Vehicle Kerb Weight : 165 kg.
Gross Vehicle weight : 295 kg.
Max. Speed : 135 km/hr
Note :
• All dimensions are under UNLADEN condition.
• Above information is subject to change without
any notice.
Electrical System :12 Volts DC
Head Lamp :Twin Projector
55W - Low Beam
65W - High Beam
Position Lamp :LED
Tail /Stop Lamp :LED
Side Indicator lamp :LED (4 nos)
Neutral Indicator :Green LED
Hi Beam Indicator :Blue LED
Turn Signal Indicator :Green LED
Speedometer Back Light :LCD , Amber
Fuel Level Indicator : LCD Bar
Low Oil Pr. Indicator : LED- Red
Malfunction Indicator : LED - Yellow
Coolant Temp. Indicator : LED - Red
Low Battery Indicator : LED - Red
Bajaj Logo : LED - Blue
Rev Indicator : LED - Yellow
Service Reminder : LCD
2
Technical Specifications
Identification Data
The Frame and Engine serial numbers are used to register the motorcycle. They are the unique
alpha-numeric codes to identify your particular vehicle from others of the same model and type.
Engine Number Location
On LH Side Crankcase Near Gear
Change Lever (Alpha-Numeric - 11 Digits)
3
Frame Number Location
On Seal Lock Mounting Bracket
(Alpha-Numeric - 17 Digits)
Location of Parts
Grab
Handle Pillion Seat Rider Seat
Rear Disc Brake Front Disc Brake
Rear Brake
Pedal
Front Brake
Lever
Digital Speedometer
Rear
Number
Plate
Front Number
Plate
Front Fork
4
Nitrox
Rear
Shock
Absorber
Steering cum Ignition Lock
To Lock the Steering : To lock the steering,
turn the handle bar to the left side. Push &
release the key. Turn the key to “LOCK”
position and remove the key. Steering lock
can be done on left side only.
To Unlock the Steering : To unlock steering,
insert the key in steering cum ignition lock &
turn it clockwise to “OFF” or “ON” position.
Key : A common key is used for ‘Steering
cum Ignition lock’, ‘Fuel tank cap’ & ‘Rear
Seat’.
Steering cum Ignition Lock :
It has three positions.
LOCK: Steering locked. Ignition OFF.
OFF: Steering unlock. Ignition OFF.
ON: Steering unlock. Ignition ON.
5
Fuel Tank Cap
• To open the fuel tank cap, open the flap.
Insert the key in the lock and turn it
clockwise and lift fuel tank cap.
• ‘Fuel Tank Cap’ gets locked when pushed
back into place.
Fuel Tank Cap / Fuel Tap
Fuel Tank Cap
6
2
7
8
3
4
6
5
9
1
Speedometer Details
Speedometer display will work when, only both
Ignition switch & kill switch are in ‘ON’ position.
1. Fuel Level Indicator: It shows fuel level in fuel tank.
2. Tachometer Dial: It shows engine speed in RPM.
3. Turn Signal Indicator (LH & RH): When Turn signal
switch is turned to Left or Right, Turn pilot Indicator -
LH or RH will flash.
4. Neutral Indicator: When the transmission is in
Neutral, Neutral indicator will glow.
5. Hi Beam Indicator: When Headlight is ‘ON’ & Hi
beam is selected with engine running, Hi beam
indicator will glow.
6. Low Battery Indicator : It indicates battery needs
charging.
7. Malfunction Indicator ( ) :It blinks whenever any
abnormality is noticed in fuctioning of FI system
related componenets
8. Low Oil Pressure Indicator ( ) : It blinks when
engine oil pressure is low.
9. Coolant Temperature Indicator ( ) : It blinks when
0
engine coolant Temperature is more than 115
centigrade.
7
and subsequently at each 5000 kms. Icon will
continue to glow till it is reset. This icon is to be
reset after service is carried out.
14.Side Stand Indicator : When side stand is ‘ON’ .
15. Digital Clock : It indicates time in HR : M (AM/PM)
16. Speedometer: Vehicle speed will be displayed in
digital form in Km / Hr.
17. Odometer : The Odometer shows the total distance
that the vehicle has covered. Odometer can't be
reset to ‘Zero’.
18. Trip Meter : Trip 1 & Trip 2 shows the distance
traveled since it was last reset to zero.
10. Bajaj Logo : Bajaj logo flying ‘B’ continuously glows.
11. Mode Button : Mode button used for changing the
mode while selecting & setting Trip1, Trip2, ODO,
Clock & Service reminder.
12. Engine Over Rev Indicator : It glows when engine
RPM crosses 9500 RPM.
13. Service Reminder ( ): ‘Spanner’ symbol glows
when ODO meter reading reaches set Kms. for
service. This Icon will flash at -
st nd
1 : 450 km 2 : 4950 km,
rd th
3 : 9950 km, 4 : 14950 km
Side Stand Indicator will light.
Speedometer Details
8
S
M
Speedometer Details
13
18
14
15
17
16
12
10
11
19. Set Button : Set button used for setting Clock &
Service reminder.
20 ABS Indicator (Yellow) ( ) : With ignition switch
‘ON’ & Kill switch ‘ON’ the ABS indicator glows.
When vehicle speed is more than 10 km/hr the ABS
indicator goes off, if this indicator glows while vehicle
is running, it means there is problem in ABS unit.
21 Low Fuel Level Indicator : It blinks incase of low
fuel level (1 bar or less)
Note : After switching ‘ON’ the ignition switch & kill
switch, the following indications will remain ‘ON’ till
engine is started.
Coolant Temperature Indicator
Low Battery Indicator
Low Oil Pressure
Malfunction Indicator
Instructions :
Incase, Malfunction indicator / ABS indicator gets ‘ON’
during vehicle running, bring the vehicle to the nearest
BAL dealership for inspection / repair
ABS System
Always maintain a safe distance between you and
objects ahead.
Speedometer Details
9
S
M
Speedometer Details
20
21
19
ABS
Tabla de contenidos
Otros manuales de Motocicleta de Pulsar
Manuales populares de Motocicleta de otras marcas
MOTO GUZZI
MOTO GUZZI QUOTA 1100 ES Manual de usuario
APRILIA
APRILIA ETV MILLE CAPONORD - PART1 02-2001 Manual de usuario
Yamaha
Yamaha 2006 YZF-R1V Manual de usuario
KTM
KTM Freeride E-XC 2021 Manual de usuario
Fantic
Fantic Enduro 125 Manual de usuario
Ducati
Ducati Supersport 750 desmodue Manual de usuario
