PTZOptics 12X-USB Manual de usuario

Rev 1.2 7/15

PTZ Optics 12X-USB

User Manual

V1.2

(English)

i Rev 1.2 7/15

Preface

Thank you for using the USB 3.0 HD Video Conferencing Camera. This manual introduces the function, installation and

operation of the HD camera. Prior to installation and usage, please read the manual thoroughly.

Note: Minimum USB 3.0 System Requirements: i3 Quad-Core

(Recommended: i5 Quad Core or better)

Precautions

This product can only be used in the specified conditions in order to avoid any damage to the camera:

Don’t subject the camera to rain or moisture.

Don’t remove the cover. Removal of the cover may result in an electric shock. In case of abnormal operation,

contact the manufacturer.

Never operate outside of the specified operating temperature range, humidity, or with any other power supply

than the one originally provided with the camera.

Please use a soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neutral detergent;

do not use any type of solvents, which may damage the surface.

Note

This is an FCC Class ADigital device. As such, unintentional electromagnetic radiation may affect the image quality of TV in a

home environment.

ii Rev 1.2 7/15

Table of Contents

1 Supplied Accessories···································································································1

2 Notes ·····················································································································1

3 Quick Start···············································································································2

4 Features ··················································································································4

5 Product Specifications ·································································································5

6 Main Unit················································································································7

7 IR Remote Controller Explanation···················································································8

8 Using the IR Remote Controller···················································································· 10

9 RS-232 Interface······································································································ 13

10 Serial Communication Control & Command Listings··························································· 14

11 Menu Setting ·········································································································· 27

12 Network Connection ································································································· 32

13 Maintenance and Trouble Shooting ················································································ 55

1 Rev 1.2 7/15

Supplied Accessories

When you unpack your camera, check that all the supplied accessories are included:

Camera ................................1

AC Power Adaptor ..............1

Power Cord...........................1

USB 3.0 AB Cable ..............1

RS232 Cable.........................1

IR Remote Controller ...........1

This User Manual ................1

Notes

Electrical Safety

Installation and operation must be in accordance with national and local electric safety standards. Do not use any power

supply other than the one originally supplied with this camera.

Polarity of power supply

The power supply output for this product is 12VDC with a maximum current supply of 2A. Polarity of the power supply

plug is critical and is as follows.

Handling

Avoid any stress, vibration, or moisture during transportation, storage, installation and operation.

Do not lift or move the camera by grasping the camera head. Do not turn the camera head by hand. Doing so may

result in mechanical damage.

Do not expose camera to any corrosive solid, liquid, or gas to avoid damage to the cover which is made of a plastic

material.

Ensure that there are no obstacles in the tilt or pan ranges of the camera lens.

Never power camera on before installation is complete.

Do not dismantle the camera - The manufacturer is not responsible for any unauthorized modification or dismantling.

2 Rev 1.2 7/15

Quick Start

Step 1. Please check that all connections are correct before powering on the camera.

3 Rev 1.2 7/15

Step 2. Set DIP switches

Set both SW-1and SW-2 to "OFF'. This is the "Normal Working Mode".

Step 3. Set the system select switch for your desired video output resolution and frame rate.

For many applications, setting 4 (720p-60) will provide the best overall performance.

For highest possible resolution, use setting 6 (1080p-30), however your actual realized frame rate may be limited to a

lower value than 30 fps by your software and/or network connection.

NOTE: After changing this dial, you need to restart the camera to see the effect. Turn the camera off.

VIDEO SYSTEM

1080i60

1080i50

720p60

720p50

576i

1080p30

480i

1080p25

Step 4. Press the Switch ON button on the rear of the camera, the power lamp will illuminate.

Step 5. The Pan-Tilt mechanism will rotate the lens to the maximum position of top right after the camera starts, then it will

return to the “center”. The process of initialization is now complete. (Note: If the position preset 0 has been stored, the position

preset 0 will be called up after initialization in lieu of “center”)

Step 6. (Optional) If you want to restore the factory default settings, press [MENU] button to display the OSD menu. Select

Mode

SW-1

SW-2

Modes

Default Setting

OFF

Normal Working Mode

Yes

OFF

4 Rev 1.2 7/15

the item [MENU] -> [RESTORE DEFAULT] -> [Restore]. Set the value [Yes], press [HOME] button to restore the factory

default settings.

Features

1. Supports UVC compatible USB 3.0 transmission, the highest rate up to 5Gbps, ensuring real-time lossless HD data

transmission.

2. Supports simultaneous USB 3.0, HDMI and IP network streaming up to 1080p-30.

3. Supports non-simultaneous CVBS (composite video) output via RCAconnector (480i or 576i).

4. Includes Panasonic's high quality, 1/3 inch, 2.12 million effective pixels, HD CMOS sensor, which can produce a

maximum 1920 x 1080 image with a high quality, maximum output frame rate of 60 fps (frames per second).

5. Includes a Olympus, high-quality, telephoto lens, supporting 12x optical zoom and 16x digital zoom.

6. The high SNR (signal to noise ratio) of the CMOS sensor (≥55dB), combined with 2D and 3D noise reduction algorithms,

effectively reduces noise, even under low illumination conditions.

7. Includes DRC (dynamic range control), allowing for greater image quality and detail across images that are both well-lit

and shadowed in the same frame.

8. Includes RS232 and RS485 interfaces for wired remote control.All of the parameters of the camera can be remotely

controlled by high-speed communications for joystick and central control system applications.

9. Includes web-based IP remote control interface.

RESTORE DEFAULT

Restore Yes

Change Value

[Home] OK

[Menu] Back

5 Rev 1.2 7/15

Product Specifications

Model

PTZ Optics 12X-USB

Type

PTZ Optics USB 3.0 HD 1080p Color Video Camera

Video System

1080i/60,1080i/50, 1080p/30, 1080p/25, 720p/60, 720p/50, 480i, 576i; NTSC, PAL

Sensor

Panasonic 1/3", CMOS, Total Pixels: 2.2M, Effective Pixels: 2.12M

Scanning Mode

Progressive

Lens

12x; f3.5mm –42.3mm; F1.8 - F2.8

Digital Zoom

16x

Minimal Illumination

0.5 Lux (@F1.8, AGC ON)

Shutter

1/25s - 1/10000s

White Balance

Auto, Indoor, Outdoor, One-Push, Manual

Backlight Compensation

Yes

Digital Noise Reduction

2D & 3D Digital Noise Reduction

Video S/N

≥55dB

Horizontal Angle of View

6.9° - 72.5°

Vertical Angle of View

3.9° - 44.8°

Horizontal Pan Range

±170°

Vertical Tilt Range

-30° to +90°

Pan Speed Range

1.7° - 100°/s

Tilt Speed Range

1.7° - 69.9°/s

Ceiling Installation

Yes

Image Mirroring

Yes

Number of Presets

245

Preset Accuracy

0.1°

Video coding standards

H264, JPEG

HD Output

1x USB 3.0, B-type female

1x HDMI Ver. 1.3

SD Output

1x CVBS: 3.5mm jack, 1Vp-p, 75Ω (requires adapter cable to connect to standard RCA input)

Network Interface and Output

1x RJ45: 10M/100M Adaptive Ethernet port

Audio Input

1-ch 3.5mm audio interface, LINE IN (embedded on IP Stream only)

Control Input / Output

1x RS-232 In: 8pin Mini-DIN, Max Distance: 30m

6 Rev 1.2 7/15

Protocols: VISCA/Pelco-D/Pelco-P

1x RS-232 Out (pass-through): 8pin Mini-DIN, Max Distance: 30m

Protocols: VISCA/Pelco-D/Pelco-P

1x RS-485: 2pin phoenix port, Max Distance: 1500m

Protocols: VISCA/Pelco-D/Pelco-P

Power Connector

JEITA type (DC IN 12V)

Input Voltage

12VDC (10.8 - 13.0V DC)

Current Consumption

2.0A (Max)

Operating Temperature

23°F - 104°F [-5°c - 40°c]

Storage Temperature

-4°F - 140°F [-20°c - 60°c]

Power Consumption

24W (Max)

Dimensions (w x h x d)

5.56” x 6.5” (7.5” full vertical tilt) x 6.38”[141.2mm x 165.1mm (190.5mm full vertical tilt) x 162mm

Weight

2.9 lbs. [1.31kg]

7 Rev 1.2 7/15

Main Unit

1. Audio LINE IN Interface (embeds in IP Stream) 7. Network (IP streaming and control)

2. CVBS (composite video SD) Interface 8. HDMI 1.3 (Digital Video Output)

3. System select dial (resolution) 9. USB 3.0 (USB Video Output)

4. RS485 jack 10. DC 12V power jack

5. RS232 IN jack 11. Power switch

6. RS232 OUT jack (pass through for daisy chain)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara IP de PTZOptics

PTZOptics

PTZOptics 12x-SDI Manual de usuario

PTZOptics

PTZOptics PT12X-ZCAM Manual de usuario

PTZOptics

PTZOptics PT20X-ZCAM Manual de usuario

PTZOptics

PTZOptics 20X-IP Manual de usuario

PTZOptics

PTZOptics PT20X-USB-GY-G2 Manual de usuario

PTZOptics

PTZOptics VL-ZCAM Manual de usuario

PTZOptics

PTZOptics PT12X-SDI-GY-G2 Manual de usuario

PTZOptics

PTZOptics PT12X-SDI-GY-G2 Manual de usuario

PTZOptics

PTZOptics PT20X-NDI-GY Manual de usuario

PTZOptics

PTZOptics PT12X-NDI Manual de usuario

PTZOptics

PTZOptics PT30X-SDI-GY-G2 Manual de usuario

PTZOptics

PTZOptics PT30X-NDI-GY Manual de usuario

PTZOptics

PTZOptics PT30X-SDI-GY-G2 Manual de usuario

PTZOptics

PTZOptics PT20X-USB-WH-G2 Manual de usuario

PTZOptics

PTZOptics PT12X-USB-WH-G2 Manual de usuario

PTZOptics

PTZOptics PT20X-SDI-GY-G2 Manual de usuario

PTZOptics

PTZOptics 20X-USB Manual de usuario

PTZOptics

PTZOptics PT12X-USB-GY-G2 Manual de usuario

PTZOptics

PTZOptics PT12X-NDI-WH Manual de usuario

PTZOptics

PTZOptics PT12X-USB-GY-G2 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario