DATA SHEET PTZOptics® Specifications & Diagrams
Rev. 1.1 2/16
1. Audio LINE IN Interface
2. CVBS Interface
3. System Select Switch
4. RS485 Jack
5. RS232 IN jack
6. RS232 OUT Jack
7. RJ45 IP Interface
8. USB 3.0 Interface
9. USB 2.0 Interface
10. HDMI Interface
11. DC 12V Jack
12. Power Switch
1. Standby Button
Press this button to enter standby mode. Press
it again to enter normal mode. NOTE: Power
consumption in standby mode is approximately
half of the normal mode.
2. Position Buttons
To set preset or call preset.
3. * Button
For multiple function.
4&13. Set/Clear Preset Buttons
Set preset: Store a preset position [PRESET] +
Numeric button (0-9): Setting a corresponding
numeric key preset position NOTE: Preset 0 - 9
via remote control and the rest from web,
keyboard and the serial port. Clear preset: Erase
a preset position [RESET] + Numeric button (0-9),
or: [*] + [#] + [RESET]: Erase all presets
5&14. Pan/Tilt Control Buttons
Press the arrow buttons to perform panning
and tilting. Press the [HOME] button to face
the camera back to front.
9. Focus Buttons
Used for focus adjustment. Press [AUTO] to adjust
the focus on the center of the object automatically.
To adjust the focus manually, press the [MANUAL]
button, and adjust it with [Far] (focus on far object)
and [Near] focus on near object).
10. Camera Address Select Buttons Press the
button corresponding to the camera which you
want to operate with the remote controller.
11. # Button
For multiple function
12. Multiple Function Buttons
Function 1. Set camera IR address: Press 3 keys
contiguously can set camera IR address as follow:
[*] + [#] + [F1]: Address 1
[*] + [#] + [F2]: Address 2
[*] + [#] + [F3]: Address 3
[*] + [#] + [F4]: Address 4
Function 2. Image freezing function Press [F4] to
start the freeze function. The word "Freeze"
displays on the upper left corner. After five
seconds, the display disappears automatically
(though the freeze feature continues). To cancel
the freeze, press the [F4] key the word "Unfreeze"
displays on the upper left corner. After five
seconds, the display disappears automatically.
6. Return Button
Press the button to back previous menu.
7. Zoom Buttons
Zoom+: Zoom In (Slow and fast speed)
Zoom-: Zoom Out (Slow and fast speed)
8. L/R Set Button
Set the left & right direction of remote control.
[L/R Set] + [1]: Normal direction.
[L/R Set] + [2]: Left and right direction will be
reversed.
15. Menu Setting
Menu button: Press this button to enter or exit the
OSD menu.
16. Backlight Button
Backlight button: Press this button to enable the
backlight compensation. Press it again to disable
the backlight compensation. NOTE: Effective only
in auto exposure mode. NOTE: If there is a light
behind the subject, the subject will appear dark.
In this case, press the backlight ON / OFF button.
To cancel this function, press the backlight
ON / OFF button.
16. 17. P/T RST Button
Press the button to self-calibrate pan and tilt
once again.
Shortcut Set Function
[*] + [#] + [1]: Display OSD menu in English
[*] + [#] + [3]: Display OSD menu in Chinese
[*] + [#] + [4]: Show IP address
[*] + [#] + [6]: Quickly restore the default settings
[*] + [#] + [8]: Show the camera version
[*] + [#] + [9]: Quickly set mount mode
(flip / normal)
123 4 56
78 9 10 11 12
T
P Z
OPTICS
152 Robbins Road Downingtown, PA 19335 PTZOptics.com 800-486-5276
