pTron Musicbot CUBE Manual de usuario
pTron Musicbot CUBE
Alexa Built-in Portable Smart Speaker
User Manual
Powered by
2
Table of Contents
Know Your Device
In The Box
Button Functionality & LED Indication
LED Status
Product Specication
Bluetooth Operation
AUX Output
Charging Procedure
Environmental Information
Tips
3
3
4
5
6
7
9
10
11
13
3
Know Your Device
In The Box
Volume Up /
Bluetooth
Volume Down
Power ON/OFF
Mute-Unmute Mic /
Factory Reset
Micro USB
Charging LED
AUX Out
Reset
Push-to-talk / Wi-Fi
Alexa Smart Speaker 3W 1
Aux Cable 1
5V/1A Adapter & USB Cable 1
User Manual 1
Warranty Card 1
Device Conguration Manual 1
Thank you Card 1
4
Button Functionality & LED Indication
STATE BUTTON LED
Power ON Long press
for 4 seconds
Turns Red, release the
button
Power OFF Long press
for 4 seconds
Turns Red, release the
button
Volume Up Short press No Indication
Volume Down Short press No Indication
Mute Mic Short press Turns Red
Unmute Mic Short press Turns OFF
Push-to-talk Short press Turns Cyan
Wi-Fi Setup
Mode
Long press
for 4 seconds
Turns Red, release the
button, starts blinking
with multiple colors.
Factory Reset Long press
for 4 seconds
Turns Red, release the
button, starts blinking
with multiple colors.
5
LED Status
STATE LED
Ready/Idle State No Indication
Listening Cyan
Thinking Cyan and Blue - Alternating
Speaking Cyan and Blue - Pulsing
Notication Arrives Yellow - Burst
Notication Queued Yellow - Slow Pulse
Do Not Disturb Purple
Microphones Mute Red
Firmware Update Solid Magenta
Wi-Fi Connecting White - blink
Wi-Fi Connected &
Alexa not logged in
Green Blinking
Wi-Fi Setup Mode Red Continuous Blinking
6
Product Specication
PARAMETERS SPECIFICATIONS
Bluetooth Version 4.2
Wi-Fi Standard 802.11 b/g/n (802.11n up to 75 Mbps)
Rated Output Power (RMS) 3W
Distortion <1%
S/N ≥80dB
Frequency Response 40 Hz to 16 kHz
No. of Mics 3
Battery Capacity 2600 mAh
Play Time Upto 6 Hours @ 80% Volume
Charging Time Upto 4 Hours
Charging Input 5V, 1 Amp
7
How to Connect and Disconnect to Bluetooth when pTron
Musicbot CUBE is not congured?
1. Power on the device. LED blinks in multiple color (Network
Conguration Mode).
2. Long press the Mic/Bluetooth button for 3 seconds.
3. Release the button when the LED turns RED.
-LED blinks white after a few seconds.
4. Go to Bluetooth option in your phone and select the
pTron Musicbot CUBE (pTron_Musicbot_CUBE_xxxxxx).
5. Device can be disconnected either through Long press the
Mic/Bluetooth button for 3 seconds or from phone.
6. To connect to another phone, Long press the Mic/
Bluetooth button for 3 seconds to discover the device
in your phone. (Precondition: Turn OFF Bluetooth in
previously connected Phone if it is available)
Bluetooth Operation
8
How to Connect and Disconnect to Bluetooth when pTron
Musicbot CUBE is congured to Wi-Fi Router?
1. Power on the device.
2. Say, Alexa, “Turn ON Bluetooth.” or Long press the
for 3 seconds.
3. Release the button when the LED becomes RED.
-No LED indication after initiating Bluetooth pair.
4. Go to Bluetooth option in your phone and select the
pTron Musicbot CUBE (pTron_Musicbot_CUBE_xxxxxx).
-Blue LED will blink for 3 times once connect your speaker.
5. Device can be disconnected either through Long press
button for 3 seconds or from phone.
-Blue LED will blink for 3 times once disconnect your speaker.
6. To connect to another phone, Long press the
button for 3 seconds to discover the device in your phone.
(Precondition: Turn OFF Bluetooth in previously connected
Phone if it is available)
9
AUX Output
AUX output is to connect the pTron Musicbot CUBE audio
to sound bars/other speakers with AUX input connection
when AUX out is connected. The pTron Musicbot CUBE sound
output will be disabled. Sound will be played through the
connected speaker.
Switch to AUX Output:
Plug one end of the AUX connector to AUX out port of the
pTron Musicbot CUBE and other end to the AUX input port of
desired speaker.
NOTE: In this mode, speaker output will be disabled.
Switch to Speaker Output:
Unplug the AUX cable from AUX output connector in a
speaker.
NOTE: Only one audio output (AUX/Speaker) will be available at
a time.
10
Charging Procedure
1. If the device is in low battery, the Red color LED on top
will blink continuously along with a voice prompt to notify
the user.
2. Plug the Micro USB charging cable connected with a
standard adapter to the charging port for charging. The
backside LED will be ON and the top LED will blink in
Red color once. Red LED will blink until a charge level is
reached.
3. If the device is fully charged, a voice prompt will be
triggered to notify the user.
4. Unplug the Micro USB, the backside LED will be OFF and
top LED will blink in Red color once.
Otros manuales para Musicbot CUBE
1
Tabla de contenidos
Otros manuales de Oradores de pTron
