PSI Matrix PP 408 Manual de usuario

User

sManual

High Speed Fanfold Printer

High Speed Fanfold Printer with Cutter

Acknowledgements

EPSON is a Trademark of Seiko Epson Corporation.

IBM is a Trademark of International Business Machines Corporation.

ProPrinter is a Trademark of International Business Machines Corporation.

A Publication of

PSi

MatrixGmbH

Hommeswiese 116c

D –57258 Freudenberg

Federal Republic of Germany

August 2014

http:\\www.psi-matrix.eu

Great care has been taken to ensure that the information in this handbook is accurate and complete.

However,

should any errors or omissions be discovered or should any user wish to make suggestions

for improving this

handbook, please feel encouraged to send us the relevant details.

The contents of this manual are subject to change without notice.

PSi Matrix GmbH.

All rights strictly reserved. Reproduction or issue to third parties in any form is not permitted without

written

authorization from the publisher.

Safety Regulations

The printers PP 407 (High Speed Fanfold Printer) and the

PP 408 (High Speed Fanfold Printer with Cutter) fulfils the safety regulations

according to EN 60950-1, UL 60950-1 and CAN/CSA 22.2/No. 60950-1 for

Information Technology Equipment.

The mains cable must be connected to a ground protected wall-socket. The

indicated voltage of the printer needs to agree with the local voltage.

The power plug must be easily accessible at any time so that it can be

disconnected immediately in case of danger or for maintenance purposes..

Comme le câble de secteur sert de dipositif d'arrêt-urgence, sa connexion à

l'imprimante doit être tout le temps accessible.

Before installing the printer, check the surrounding conditions in which the

printer will be placed (see next page, Operating Environment and chapter 1).

During a thunderstorm you should never attempt to connect or disconnect any

data transfer cables.

The power supply should only be opened and checked by authorized personnel.

Repairs and maintenance beyond the descriptions of chapter 3 Maintenance

may only be attempted by authorized personnel as well. Repairs done

inappropriately may cause damage and severe danger for the user.

There are warning symbols to draw the user's attention to possible injuries:

This symbol is visible when the top cover has been opened.

It indicates that the print head is extremely hot after long

periods of printing.

This symbol is located on the cover of the cutting device. It

cautions against touching the blade.

Safety Regulations

Electromagnetic Compatibility

We certify that the equipment at issue,

S Printer PP 407 (High Speed Fanfold Printer) and

S Printer PP 408 (High Speed Fanfold Printer with Cutter)

corresponds to the law regulations ruling electromagnetic compatibility of

appliances (2004/108/EC) and, therefore, fulfils the requirements for conformity

marking with the CE-sign.

To assure the compliance with the limiting values in according to the test

standards for interference (EN 55022, class B) and noise immunity (EN 55024),

shielded interface cables must be used.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, it can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the

following measures:

S Reorient or relocate the receiving antenna.

S Increase the separation between the equipment and receiver.

S Connect the equipment to an outlet on a circuit different from the circuit to

which the receiver is connected.

S Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables should be used with this unit to ensure compliance

with Class B limits.

Changes and modifications not explicitly allowed by the equipment's

manufacturer could void the user's authority to operate the equipment.

Changes et modifications pas expressément approuvés par le producteur

peuvent dévaluer l'autorité d'opérer l'équipement.

III

Safety Regulations

Operating Environment

Avoid installing the printer where it is exposed to moisture or heat (eg. direct sun

light).

S Temperature: + 10°C to + 35°C (+50°F to +95°F)

S Humidity: 20% to 80%

Slots and openings in the printer's housing are provided for ventilation. Always

ensure that these openings are not obstructed.

Also ensure that the cables at the rear of the printer do not interfere with the

output paper path.

Table of Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XI

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XI

Conventions used in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIII

Getting Started

.........................................................................................1-1

1.1 Unpacking the High Speed Fanfold Printer

...........................................1-1

1.1.1 A First Look to the High Speed Fanfold Printer

...............................1-2

1.2 Unpacking the High Speed Fanfold Printer with Cutter

.........................1-3

1.2.1 A First Look at the High Speed Fanfold Printer with Cutter

.............1-4

1.2.2 Mounting the Cutting Device

...........................................................1-5

1.3 Site Consideration

................................................................................1-6

1.4 Transport Lock

......................................................................................1-7

S Repacking Information

....................................................................1-7

1.5 Installing the Personality Module

..........................................................1-8

1.6 The Power Supply

................................................................................1-9

S Main Voltage

.........................................................................................1-9

1.7 Power ON/OFF Switch

.......................................................................1-10

1.8 Installing the Ribbon Cassette

............................................................1-11

1.8.1 Replacing the Ribbon Cassette

.....................................................1-14

1.9 Inserting Fanfold Paper

.......................................................................1-15

S Handling of the Tractor Cassettes

......................................................1-15

1.10 Selection of Operator Panel Language

...............................................1-17

1.11 Paper Source Selection

......................................................................1-18

1.12 Test Prints

..........................................................................................1-19

S PRINT TEST 1

....................................................................................1-19

S PRINT TEST 2

....................................................................................1-20

S To start a print test

..............................................................................1-21

1.13 Connection to a Computer

..................................................................1-22

S Parallel, Serial, or USB Interface

........................................................1-22

Safety Regulations

1.14 Emulation Selection

............................................................................1-23

Printer Operation.......................................................................................2-1

2.1 Control Panel..........................................................................................2-1

2.2 Function Keys.........................................................................................2-2

2.2.1 Short Description of Keys..................................................................2-2

S in the printer operation state READY or BUSY............................2-2

S in the printer operation state LOCAL ...........................................2-2

2.2.2 Detail Description of Keys in the printer operation

state READY or BUSY......................................................................2-3

S Quick Settings..............................................................................2-3

S Top Row Keys..............................................................................2-4

S Lower Row Keys..........................................................................2-4

2.2.3 Meaning of the Keys in the LOCAL Mode .........................................2-7

S Lower Row Keys..........................................................................2-7

2.3 Menu Mode............................................................................................2-8

2.3.1 To Activate the Menu........................................................................2-9

2.3.2 To Confirm Selection

......................................................................2-10

2.3.3 How to Save Settings

.....................................................................2-11

2.3.4 Quick Settings

................................................................................2-12

Maintenance...............................................................................................3-1

S Preferred Materials.................................................................................3-1

3.1 Cleaning.................................................................................................3-1

3.2 Cleaning Procedure................................................................................3-3

3.3 User Replaceable Parts..........................................................................3-4

3.3.1 Replacement of the Print Head .........................................................3-4

S Print Head Removal..........................................................................3-4

S Print Head Installation.......................................................................3-5

3.3.2 Replacement of the Platen................................................................3-6

S Remove the Platen............................................................................3-6

S Install the Platen................................................................................3-7

Trouble Shooting and Diagnostics

..........................................................4-1

S How to Use this Section

........................................................................4-1

4.1 Power-related Problems

........................................................................4-2

4.2 Error Messages

.....................................................................................4-2

4.2.1 Errors during Selftest

........................................................................4-2

4.2.2 Errors during Printing

.......................................................................4-4

4.2.3 Technical Errors

...............................................................................4-6

4.3 No Printout

............................................................................................4-7

4.4 Operation-related Problems

...................................................................4-8

4.5 Print-related Problems

...........................................................................4-9

4.6 Paper Jam

...........................................................................................4-11

4.7 Ribbon or Carriage-related Problems

..................................................4-13

4.8 Print Test

.............................................................................................4-13

4.9 Diagrams of Errors

..............................................................................4-14

4.9.1 Paper Jam TRF

..............................................................................4-14

4.9.2 No Printout / No Printing

.................................................................4-15

4.9.3 Print Faint or of Poor Quality

..........................................................4-16

Technical Data

..........................................................................................5-1

S Label Processing

...................................................................................5-9

Table of Contents

VIII

A. Configuring the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

A.1 What is Configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

A.2 Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . A-3

A.2.1

for the High Speed Fanfold Printer . . . . . . . . . . . . . . . . . . . . . . . A-3

A.2.2

for the High Speed Fanfold Printer with Cutter . . . . . . . . . . . . . A-4

A.3

Explanation of the Printout on the previous page . . . . . . . . . . . . . . . . A-5

A.4

Explanation of Individual Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Main Functions . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

S MACRO SELECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

S CHANGE MACRO . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

S INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

S SAVE . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

S PRINT OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

Main Function CHANGE MACRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

S FONT . ... . . . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

S PRINT QUALITY ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

S GRAPHICS QUALITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

S SUB/SUPER FONT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

S PITCH ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

S LINE . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

S PAPER LENGTH . ... . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

S VERT.POS.ADJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

S LEFT MARGIN . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

S RIGHT MARGIN ... . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11

S TOP MARGIN ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11

S BOTTOM MARGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

S PERFORATION SKIP ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

S PAPER SOURCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

S PAPER EXIT . ... . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

S STACK.CAPACITY ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

S BATCH CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . A-13

S EMULATION . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

S CHARACTER SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

S LINE MODE . . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

S $$ COMMANDS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15

S TEAR-OFF / CUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15

Otros manuales para PP 408

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de PSI Matrix

PSI Matrix

PSI Matrix PP 40 Series Manual

PSI Matrix

PSI Matrix PP204 Manual de usuario

PSI Matrix

PSI Matrix PP 408 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario