PSA Products H.264 Manual de usuario

Network Digital Video Recorder

H.264

User manual

Please read instructions thoroughly before operation and retail it

for future reference.

V0.3

Notes:

! Do not place objects on this device!

! Do not let any solid or liquid enter the DVR!

! Clean the circuit board, connectors, fans and case with a brush regularly

but remember to turn off the power and pull the plug before cleaning .

! Do not disassemble, maintain the device, or replace parts by yourself.

! Avoid knocking this DVR. Do not drop the device.

Operational Environment

! Place and use the product at a temperature of 0 ℃~ 40 ℃. Avoid direct

sunlight and be away from heat sources.

! Do not install the device in a damp environment;

! Do not expose the device to smoky and dusty environment.

! Keep the device be installed horizontal and in a stable place. Take care to

prevent it from falling.

Directory

1 Production Introduction

1.1 Product overview ..................................................................................................... 1

1.2 Main functions ...................................................................................................... 1

2 Open-package check and cable connections

2.1 Open-package check............................................................................................... 1

2.2 Remote control......................................................................................................... 1

3 Basic operation

3.1 Turn on...................................................................................................................... 2

3.2 System login............................................................................................................ 2

3.3 Preview..................................................................................................................... 2

3.4 Desktop shortcut menu............................................................................................ 2

3.4.1 Circulation........................................................................................................ 3

3.4.2 Color setting..................................................................................................... 3

3.4.3 E- zoom........................................................................................................... 3

3.4.4 Audio................................................................................................................ 3

3.4.5 PTZ control............................................................................................................... 3

3.4.6 Playback.......................................................................................................... 4

4 Main menu

4.1 Main menu navigation.............................................................................................. 5

4.2 Conguration management..................................................................................... 6

4.2.1 Basic conguration.......................................................................................... 6

4.2.2 Live conguration............................................................................................ 7

4.2.3 Video conguration.......................................................................................... 8

4.2.4 Video program................................................................................................. 12

4.2.5 Alarm................................................................................................................ 13

4.2.6 Network............................................................................................................ 16

4.2.7 User management.......................................................................................... 19

4.2.8 P.T.Z ................................................................................................................ 20

4.2.9 Advanced conguration.................................................................................. 23

4.3 Data retrieval............................................................................................................ 23

4.3.1Time search...................................................................................................... 23

4.3.2 Event search................................................................................................... 24

4.3.3 File management............................................................................................ 24

4.3.4 Image............................................................................................................... 24

4.4 Info............................................................................................................................ 25

4.5 View Infor.................................................................................................................. 26

4.5.1 System Info..................................................................................................... 27

4.5.2 Event Info........................................................................................................ 27

4.5.3 System log..................................................................................................... . 27

4.5.4 Network state................................................................................................. 28

4.5.5 Online users................................................................................................... 28

4.6 Disk management................................................................................................... 28

4.7 upgrade maintenance............................................................................................. 28

4.8 Logout..................................................................................................................... 29

4.9 System shutdown.................................................................................................... 29

5 Remote monitoring

5.1 Access..................................................................................................................... 29

5.1.1 LAN................................................................................................................ 29

5.1.2WAN................................................................................................................ 31

5.2 Remote eld preview.............................................................................................. 32

Appendix 1. FAQ....................................................................................................... 33

Appendix 2. Hard disk capability calculation............................................... 38

1 Production Introduction

1.1 Product overview

The series DVR is designed specially for security and defence eld and is an outstanding

digital surveillance product. It introduces embedded LINUX operating system which is very

stable. It introduces standard H.264 mp video compressed format and unique temporal

and spatial filtering algorithm which insures the high quality image and low bit rate

synchronous audio and video surveillance. It introduces TCP/IP network technology which

achieves the strong network data transmission capability and remote control capability.

The series DVR can be used individually or online applied as a part of a safety surveillance

network. With the professional network video surveillance software it achieves the strong

network communication ability and telecommunication ability.

The series DVR can be applied in the bank, telecom, electric power system, judicial system,

transportation, intelligent housing, factory, storehouse, water conservancy and so on.

2 Open-package check and cable connections

2.1 Open-package check

When you receive the product, please conrm whether it is consistent with the product

model you ordered and check carefully whether there is any obvious damage of the

product. After opening the casing, check whether the connection between the internal

data wire, power wire, fan power wire and so on and the main board are rm .Please

protect the labels afxed to the oor or rear panel , which is very important to our after-

sales service work. When you contact our company for after-sales service, we need you to

provide the model and serial No. on the label.

2.2 Remote controller operation

The operating steps to control multiple DVRs by remote control:

The default device number of the DVR is zero, you can operate directly without resetting

when using the remote controller to control a single DVR.. But if you use one remote

control to operate multiple DVRs, please refer to the following steps.

Step one: Enter DVR to see the device number: [System configuration]-[Basic

conguration]-[Device Number]. The device number of different DVR can be set the same.

For easy operation, we suggest to set the device number not too large.

Step two: Activate the remote control: Aim the remote control to the DVR you will control,

press the “ADD” button, then input the device number [between 1-65535], and then press

“ENTER” to conrm.

Step three: Cancel the remote control : You can lock the DVR when you press any button

with “ADD” button, or do no action on the buttons, it will be locked after 30 seconds.

3. Basic Operation

3.1 Turn on

Plug the power supply, the power indicator light will illuminate and the video recorder

turns on, you will hear a beep at this time. After startup, the default setting of the system is

multiple-screen output mode and video recording starting up automatically.

3.2 System login

When the DVR boots up, the user must login and the system provides the corresponding

functions with the user purview.

3.3 Preview

After entering the preview status , double-click the left mouse button to choose the switch

between the windows.

The system date, time and channel name are shown in each viewing window. The

surveillance video and the alarm status are shown in each window.

Table 3.1 Preview page icon

3.4 Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu and right

click mouse again to ESC the desktop shortcut menu.

Manual recording or

Trigger recording

Motion detection

recording

Network disconnection

(Green)

(Yellow)

(Red)

(Blue)

Alarm recording

Timing recording

Picture 3.2 Shortcut Menu

3.4.1 Start Scan

Start Scan means the system will show each live picture in order automatically according

to the order of the video devices in the channel grouping.

Only when the user selects the channel grouping under the display mode[main

menu]>[conguration management]>[live], and it can not show all channels completely

under the current preview, this button is available.

3.4.2 Colour

Set image parameters for all channels. The image parameters include: brightness,

contrast, saturation and hue.

3.4.3 E -Zoom

E-Zoom for big picture of single channel

3.4.4 Audio

Set startup, turn-off and silent mode of audio for the channel, and adjust the volume ..After

select (automatic), it will start up audio of the big picture channel automatically.

3.4.5 PTZ

Control the RS485 device of all channels. It can set address, Baud rate, Protocol, Preset,

trail patrol , track and so on of the RS485 device under [Main menu]>[Configuration

Management]>[PTZ].

Adjust direction

of the PTZ.

Wiper control.

Control the external infrared devices. Function hidden bar, right-click to cancel hidden.

3.4.6 Playback

Play the video les in the hard disk. You can also search the video according to time and

event under [main menu] →[data retrieval]to enter the playback interface.

(1)Playback control (2)Channel audio switch (3)function Hidden key (4)Operate playback

Playback control details as follow:

Table 3.2 Playback control key

Note: Frame by frame play back is achieved using the pause function.

Function

Play/Pause

Fast motion play

Play previous le

Single-screen display

Function

Play according to frame

Playback

Play next le

Multi-screen display

Button Button

4 Main menu

4.1 Main menu navigation

Set the system time, date format, time format, language, the

device number, video format, standby time, daylight saving time

Set the channel name, output mode, block area of each channel,

etc

Start up video recording , set up the video stream, position of

channel name, video circulation, snapshot, etc

Set timer recording, motion alarm recording, period of sensor

alarm recording

Set sensor alarm of each channel, motion detection, video loss,

other alarms, alarm output, etc

Set basic network parameters, and set network sub-stream,

email, WIFI and Dynamic Domain Name Service

Modify users, change passwords, add users and delete users

Set the PTZ address, baud rate, protocol, preset, cruise , track, etc.

Restore the factory settings, import and export the device

parameters

Search specied period of time recording , playback the video of

this period

Search motion detection, sensor alarm and all videos, play back

the video of this period

Inquiry and export of motion detection, video loss, sensor alarm

and other events

Search equipment operation log according to time, it can also be

exported

Display information of network settings and dynamic DNS

settings

Show hard disk’s total space, free space, read and write status

and to format. the hard disk

Delete and lock the video les of specied time period

Delete, lock and save the image of specied time period

Display the device name, serial number, version, release date

Display the current network users accessing the device

Upgraded with an external device ( eg: USB)

After log-off , exit system and log in

Main menu Submenu Function

Basic

conguration

Live

conguration

Recording

conguration

Recording

Plan

Alarm

conguration

Network

conguration

User

management

Advanced

conguration

Network

status

Hard disk

management

User log-off

Data retrieval

View

information

Time search

Event search

System Info

Event Info

System log

Online users

Image

P.T.Z

File management

Conguration

management

Upgrade

maintenance

System

shutdown

4.2 Conguration Management

Set every function parameters for the device, including: basic configuration, live

conguration, recording conguration, recording plan, alarm conguration, network

conguration, user management, PTZ conguration, advanced conguration

4.2.1 Basic Conguration

Basic conguration includes three sub menus: system, date and time, daylight saving time

Figure 4.10 Basic settings

1.The system

[Device Name] Client or system name displayed by IVSS

[Device ID] used when a remote control controls multiple DVR

[Video Format] Support PAL and NTSC format

[Password Check] Choosing this item means user must enter user name and password in

the system Settings, and have corresponding purview before corresponding operations

[Show System Time] Choose whether to display time in the eld or not

[Max Online Users] Set the number of network users visiting the device

[Video Output] User can select VGA 800 * 600, VGA 1024 * 768, VGA 1280 * 1024, HDMI,

etc. output mode

[Logout After (Minutes)] When there is no action exceeding the set time, the system will

automatically log out

[Startup Wizard ] Whether to display wizard or not when turn on the machine

2.Date & Time

In this interface, set the date format, time format, time zone; you can also adjust the

system time manually

Note: the default time zone of the system is GMT

You can select [Time Synchronization] to correct time. Network time server can be set

3.DST(Day Light Saving)

Set the start and end time of daylight saving time by week or date. As Figure 4.11,

Tabla de contenidos

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario