Proxima PROJECTIONLINK BNDL-001 Guía de solución de problemas
®
PROJECTIONLINKTM
PL-300, PL-300E, AND BNDL-001
PRESENTATION SOLUTIONS Projector Accessories
®www.proxima.com
1.800.294.6400 PROJECTIONLINK
[ User & Installation Guide ]
ii ProjectionLink User & Installation Guide
Warranty
Proxima Corp. (“Proxima”) warrants that each ProjectionLink
system (Product) purchased from Proxima Corp. is free from defects
in materials and workmanship under normal use during the
warranty period said warranty shall commence on the day of
purchase by the End-User and continue for a period of two (2)
years.
To exercise the End-User’s rights under this warranty, the Product
must be returned at the End-User’s expense, to Proxima
Corporation or to any authorized Proxima Corp. service center. The
returned product must be accompanied by (i) the End-User’s sales
receipt or invoice that shows the date of sale, product type and
dealer’s name, and, when returned to Proxima Corporation, (ii) a
return authorization number, issued by Proxima Corporation that is
clearly displayed on the outside of the shipping carton. The
Warranty extends only to the original End-User purchase and is not
transferable.
During the Warranty Period, Proxima Corp. will, at no additional
charge, repair or replace defective parts or, at the option of Proxima
Corporation, replace the entire unit. Proxima Corporation shall have
no other obligation, and repair or replacement shall be the End-
User’s exclusive remedy for any defect in the Product.
This Limited warranty does not extend to any Product that has been
damaged due to accident, unauthorized modifications, tampering,
abuse, misuse, alterations, unusual physical or electrical stress, or to
any Product that has been serviced by other than Proxima
Corporation or its authorized agents or which has been used in any
manner other than from ordinary use in the application for which it
was intended. This limited warranty does not extend, or apply, to
any other products which may be connected to Product.
THE FOREGOING WARRANTY IS EXPRESSLY IN LIEU OF ANY
OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT
ProjectionLink User & Installation Guide iii
NOT PROHIBITED BY LAW, ALL STATUTORY WARRANTIES
ARE HEREBY WAIVED AND EXCLUDED FROM THIS LIMITED
WARRANTY. PROXIMA CORPORATION EXPRESSLY
DISCLAIMS ALL WARRANTIES NOT STATED IN THE LIMITED
WARRANTY.
It is understood and agreed that the liability of Proxima Corporation,
whether in contract, in tort, under any warranty, in negligence or
otherwise shall not exceed the return of the amount of the purchase
price paid by the End-User and under no circumstances shall
Proxima Corporation be liable for special, indirect or consequential
damages. No action, regardless of form, arising out of the agreement
to purchase the Product may be brought by the End-User more than
one year after the cause of the action has accrued.
iv ProjectionLink User & Installation Guide
This page intentionally left blank.
ProjectionLink User & Installation Guide v
Table of Contents
Chapter 1:
What is ProjectionLink?.......................................... 1
ProjectionLink Operational Summary........................ 3
Understanding the ProjectionLink System ................ 4
What’s in the PL-300/PL-300E Accessories Box? ........ 5
What’s in the BNDL-001 Accessories Box?................. 7
RS-232 Control Cables ............................................... 8
vi ProjectionLink User & Installation Guide
Chapter 2:
Installing ProjectionLink......................................... 9
Before Installing ........................................................ 9
Connecting the External PL-300 Receiver................ 10
To the DP6850 and DP6850+ ...........................................................12
To the DP9240, DP9260, and DP9260+ ...........................................13
To the Pro AV 9320, Pro AV 9400, Pro AV 9400+, and
Pro AV 9410.......................................................................................14
To the Pro AV 9350............................................................................15
To the LX2 and LS2 ...........................................................................17
To the DP9280 ...................................................................................18
To the DP6150 ...................................................................................19
To the S520........................................................................................20
Connecting to the Advanced Connectivity Module 21
Configuring the Transmitter.................................... 22
Connecting the Transmitter.................................................................23
Connecting Input Sources...................................................................25
Connecting Local Outputs ..................................................................26
Connecting CAT-5 Cable .......................................... 27
Chapter 3:
Configuring ProjectionLink .................................. 29
Fine-Tuning the Image............................................. 32
Chapter 4:
Mounting ProjectionLink ..................................... 35
Mounting the Transmitter Under a Table................ 35
Mounting the Transmitter in a Rack........................ 37
Mounting the Receiver ............................................ 38
Table of Contents
ProjectionLink User & Installation Guide vii
Chapter 5:
Using ProjectionLink ............................................ 39
Switching Between Input Sources........................... 39
Using ProjectionLink with an IR Remote Control .... 41
Chapter 6:
Upgrading ProjectionLink Firmware .................... 43
Appendix A:
Troubleshooting................................................... 45
Troubleshooting Table............................................. 46
Technical Support .................................................... 48
Appendix B:
Technical Specifications ....................................... 49
Appendix C:
Dip-Switch Settings.............................................. 51
Appendix D:
Operational Summary .......................................... 53
viii ProjectionLink User & Installation Guide
This page intentionally left blank.
ProjectionLink User & Installation Guide 1
Chapter 1:
What is ProjectionLink?
ProjectionLink is Proxima’s revolutionary new solution to
numerous stray cables to simplify projector installations and
connectivity. It’s the first single-wire solution that connects
your computer and video sources with an installed projector.
Utilizing Category 5 (CAT-5) unshielded, twisted pair cabling,
installing and configuring your installed projector is as easy as
pulling a network cable.
2 ProjectionLink User & Installation Guide
The Projection Link System
ProjectionLink includes two components: a Transmitter
(PL-300T) and a Receiver (PL-300R). The Transmitter is con-
nected to your computer or other source and the Receiver is
connected to your projector.
This Installation Guide shows you how to configure Projec-
tionLink. This Installation Guide does not explain how to
install ceiling mount projectors or how to pull cable, etc. Use
the suggestions in this Installation Guide to help configure
your projector with the ProjectionLink system.
The ProjectionLink Transmitter (PL-300T) should be located
somewhere in your conference room or boardroom. The
Transmitter allows you to connect multiple input sources to
your projector via CAT-5 cabling. Typically, the Transmitter is
located under your conference table or inside a podium at the
front of a room. This is the connection point for your input
devices (computers, video, and audio devices) and your
installed projector.
Transmitter
TransmitterTransmitter
Transmitter
Receiver
ReceiverReceiver
Receiver
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
