Features
Chapter 2
Features
Synthesized PLL Channel Selection - Crystal-Free!
Frequencies of most transmitters and receivers are adjusted by replacing the
crystals. Enthusiasts who want to try on a different frequency channel must also
purchase the corresponding crystal sets. To complicate matters further there are so
many types of crystals based on modulation (FM/AM, PPM/PCM), conversion type
(Single/Dual) and Radio makers. To solve this complicated and costly way of
enjoying R/C, Proton Control Systems implemented the PLL (Phase-Locked Loop)
technology in developing the Husky transmitters and Ken receivers. Your preferred
frequencies is digitally tuned from the menu by simply by pressing buttons. In a
North American model, as an example, all 30 channels in the 75MHz band are
available at your fingertip.
Compatible with all popular FM transmitters & receivers
Your Husky transmitter and Ken receiver are each compatible with all popular FM
transmitters and receivers using the same frequency band. These include Positive
shift (FutabaTM, HitecTM, or KOTM) and Negative shifts (JRTM, SanwaTM or AirtronicsTM).
USB port for PC game control (using optional cable)
Your Husky is more than a transmitter for your R/C models. Use your Husky
transmitter as a joystick (steering and throttle operations only) to control your PC
games.
Interchangeable grip direction for left or right handed drivers
Husky's symmetrical design allows you to change format from right- to left-hand
grip.
Comprehensive programming features
Husky provides 3 modes (System, Pit, and Circuit) of setup fields and 3 levels
(Basic, Intermediate, Advanced ) of programming to make its wide range of features
available for customisation. The programs are simple to set, but offer many
powerful and sophisticated functions.
Other features include :
- LCD menu-driven setup and programming with non-volatile memory saving
- Quick access Digital Trim & Dual Rate buttons with direct display
- 10 model memory with up to 8 characters of model name entry
- Direct Servo Control (using optional cable)
- Servo Reverse, Sub-Trim, Model select, Programming Level & Data Reset [Pit
Mode]
- End Point Adjustment (EPA), Response Sensitivity, Steering Speed, 2-Step
Steering Speed, Throttle Speed, 2-Step Throttle Speed, Start rate, Anti-lock
Braking System (ABS), 3-Programmed ABS (slow, medium, fast), Steering Speed
based on Throttle (SST), Dead Band Adjustments (DBA) and Idle Up features
[Circuit Mode]
- Trim Rate, Frequency & Shift, Contrast and Data copy functions [System Mode]
- Stopwatch with continuous lap timer function
- Audible and visual low battery alarm
- Charging jack receptacle (charger & rechargeable batteries not included)
6
